한국대기환경학회지 (Journal of Korean Society for Atmospheric Environment)

  • 제32권4호
  • /
  • Pages.384-393
  • /
  • 2016
  • /
  • 1598-7132(pISSN)
  • /
  • 2383-5346(eISSN)
한국대기환경학회 (Korean Society for Atmospheric Environment)
권호 표지
DOI QR코드

DOI QR Code

산업용 필터백의 구조에 따른 여과성능 특성

Filtration Performance Characteristics according to Filter Bag Structure for Application of Industries

  • 전성민 (한국에너지기술연구원 기후변화연구본부) ;
  • ;
  • 이강산 (한국에너지기술연구원 기후변화연구본부) ;
  • 이재랑 (한국에너지기술연구원 기후변화연구본부) ;
  • 김광득 (한국에너지기술연구원 기후변화연구본부) ;
  • 박영옥 (한국에너지기술연구원 기후변화연구본부)
  • Jeon, Seong-Min (Climate Change Technology Research Division, Korea Institute of Energy Research) ;
  • Hasolli, Naim (Climate Change Technology Research Division, Korea Institute of Energy Research) ;
  • Lee, Kang-San (Climate Change Technology Research Division, Korea Institute of Energy Research) ;
  • Lee, Jea-Rang (Climate Change Technology Research Division, Korea Institute of Energy Research) ;
  • Kim, Kwang-Deuk (Climate Change Technology Research Division, Korea Institute of Energy Research) ;
  • Park, Young-Ok (Climate Change Technology Research Division, Korea Institute of Energy Research)
  • 투고 : 2016.06.02
  • 심사 : 2016.08.23
  • 발행 : 2016.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, two kinds of industrial filter bags were tested for their filtration performance to apply the existing bag filter systems. Experimental variables were examined for pressure drop, cleaning interval, residual pressure drop, cleaning efficiency, fractional grade efficiency, total collection efficiency according to the filter bag structure. According to these results, the filter bags tested in this study demonstrated good performance in dust collection. This was also true for the double surface filter bag. The lifetime was longer than the round type filter bag because the filtration area was more than 1.6 times wider and the filter quality factor was much higher. Therefore, double surface filter bags are suggested to be used in order to increase filtration performance of the bag filter systems.

키워드

참고문헌

  1. Cooper, C.D. and F.C. Alley (2002) Air Pollution Control: a Design Approach, second ed., Waveland Press, Inc., Long Grove, 182-185.
  2. Hemmer, G., S. Berbner, and G. Umhauer (1990) The Separation Efficiency of Ceramic Barrier Filters Determined at High Temperatures by Opticla Particle Size and Concentration Measurement, High Temperature Gas Cleaning 2, pp. 220.
  3. Hinds, W.C. (1999) Aerosol Technology: Properties. Behavior, and Measurement of airborne Particles, John Wiley & Sons, 182-205.
  4. Kim, S.D., Y.O. Park, and Y. Kang (2004) Characteristics of a Hybrid Fabric Filter System with a Tangential Inlet, The Korean Society of Industrial and Engineering Chemistry, 15(6), 625-631. (in Korean with English abstract)
  5. Lim, J.H., H.Y. Kim, C.O. Koo, Y.O. Park, S.M. Yang, and Y.S. Park (1998) Collection Characteristics of Coke Dusts and Fluidized Bed Incinerator Dusts using Filter Fabric, Korean Society of Environmental Engineers, 20(5), 711-722. (in Korean with English abstract)
  6. Patankar, S. (1980) Numerical Heat Transfer and Fluid Flow, CRC press.
  7. Ryu, J.Y., J.M. Suh, J.H. Park, B.K. Jeon, K.C. Choi, and Y.I. Son (2007) Study on Filter Drag Due to the Change of Operation Conditions in a Pulse Air Jet-type Bag Filter[1], The Korean Environmental Sciences Society, 16(4), 449-458. (in Korean with English abstract)
  8. Seo, Y.H. (2015) Characterization of high concentration $PM_{2.5}$ by nitrate and ammonium ions of $PM_{2.5}$ in Seoul, Korean Society of Environmental Administartion, 21(1), 1-7. (in Korean with English abstract)
  9. Sun, Y., Q. Jiang, Z. Wang, P. Fu, J. Li, T. Yang, and Y. Yin (2014) Investigation of the sources and evolution processes of severe haze pollution in Beijing in January 2013, Journal of Geophysical Research: Atmospheres, 119(7), 4380-4398. https://doi.org/10.1002/2014JD021641