DOI QR코드

DOI QR Code

Higher order flutter analysis of doubly curved sandwich panels with variable thickness under aerothermoelastic loading

  • 투고 : 2016.02.16
  • 심사 : 2016.05.05
  • 발행 : 2016.10.10

초록

In this study, the supersonic panel flutter of doubly curved composite sandwich panels with variable thickness is considered under aerothermoelastic loading. Considering different radii of curvatures of the face sheets in this paper, the thickness of the core is a function of plane coordinates (x,y), which is unique. For the first time in the current model, the continuity conditions of the transverse shear stress, transverse normal stress and transverse normal stress gradient at the layer interfaces, as well as the conditions of zero transverse shear stresses on the upper and lower surfaces of the sandwich panel are satisfied. The formulation is based on an enhanced higher order sandwich panel theory and the vertical displacement component of the face sheets is assumed as a quadratic one, while a cubic pattern is used for the in-plane displacement components of the face sheets and the all displacement components of the core. The formulation is based on the von $K{\acute{a}}rm{\acute{a}}n$ nonlinear approximation, the one-dimensional Fourier equation of the heat conduction along the thickness direction, and the first-order piston theory. The equations of motion and boundary conditions are derived using the Hamilton principle and the results are validated by the latest results published in the literature.

키워드

참고문헌

  1. Abbas, L.K., Rui, X., Marzocca, P., Abdalla, M. and De Breuker, R. (2011), "A parametric study on supersonic/hypersonic flutter behavior of aero-thermo-elastic geometrically imperfect curved skin panel", Acta Mech., 222, 41-57. https://doi.org/10.1007/s00707-011-0525-8
  2. Armenakas, A.E., Gazis, D.C. and Herrmann, G. (1969), Free Vibrations of Circular Cylindrical Shells, Oxford, Pergamon Press.
  3. Biglari, H. and Jafari, A.A. (2010), "Static and free vibration analyses of doubly curved composite sandwich panels with soft core based on a new three-layered mixed theory", Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci., 224, 2332-2349. https://doi.org/10.1243/09544062JMES2143
  4. Fekrar., A., El Meiche, N., Bessaim, A., Tounsi, A. and Adda Bedia, E.A. (2012), "Buckling analysis of functionally graded hybrid composite plates using a new four variable refined plate theory", Steel Comp. Struct., 13(1), 91-107. https://doi.org/10.12989/scs.2012.13.1.091
  5. Frostig, Y. and Baruch, M. (1994), "Free vibration of sandwich beams with a transversely flexible core: a high order approach", J. Sound Vib., 176(2), 195-208. https://doi.org/10.1006/jsvi.1994.1368
  6. Frostig, Y. and Thomsen, O.T. (2004), "Higher-order free vibration of sandwich panels with a flexible core", Int. J. Solid. Struct., 41, 1697-1724. https://doi.org/10.1016/j.ijsolstr.2003.09.051
  7. Ganapathi, M. and Varadan, T.K. (1995), "Supersonic Flutter of laminated curved panels", Defence Sci. J., 45(2), 147-159. https://doi.org/10.14429/dsj.45.4114
  8. Jalili, S., Zamani, J., Shariyat, M., Jalili, N., Ajdari, M.A.B. and Jafari, M. (2014), "Experimental and numerical investigation of composite conical shells", Struct. Eng. Mech., 49(5), 555-568. https://doi.org/10.12989/sem.2014.49.5.555
  9. Kheirikhah, M.M., Khalili, S.M.R. and Malekzadeh Fard, K. (2012), "Analytical solution for bending analysis of soft-core composite sandwich plates using improved high-order theory", Struct. Eng. Mech., 44(1), 15-34. https://doi.org/10.12989/sem.2012.44.1.015
  10. Kuo, S.Y. (2011), "Flutter of rectangular composite plates with variable fiber pacing", Comp. Struct., 93, 2533-2540. https://doi.org/10.1016/j.compstruct.2011.04.015
  11. Leissa, A.W. and Kadi, A.S. (1971), "Curvature effects on shallow shell vibrations", J. Sound Vib., 16(2), 173-187. https://doi.org/10.1016/0022-460X(71)90482-2
  12. Li, F.M. and Song, Z.G. (2013), "Flutter and thermal buckling control for composite laminated panels in supersonic flow", J. Sound Vib., 332, 5678-5695. https://doi.org/10.1016/j.jsv.2013.05.032
  13. Malekzadefard, K., Livani, M. and Ashena Ghasemi, F. (2014a), "Improved high order free vibration analysis of thick double curved sandwich panels with transversely flexible cores", Lat. Am. J. Solid. Struct., 11, 2284-2307. https://doi.org/10.1590/S1679-78252014001200010
  14. Malekzadefard, K., Livani, M., Veisi, A. and Gholami, M. (2014b), "Improved high-order bending analysis of double curved sandwich panels subjected to multiple loading conditions", Lat. Am. J. Solid. Struct., 11, 1591-1614. https://doi.org/10.1590/S1679-78252014000900006
  15. Malekzadeh Fard, K. and Livani, M. (2015), "The buckling of truncated conical sandwich panels under axial compression and external pressure", Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci., 229(11), 1965-1978. https://doi.org/10.1177/0954406214552683
  16. Meunier, M. and Shenoi, R.A. (1999), "Free vibration analysis of composite sandwich plates", Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci., 213(7), 715-727. https://doi.org/10.1177/095440629921300707
  17. Moradi, S. and Mansouri, M.H. (2012), "Thermal buckling analysis of shear deformable laminated orthotropic plates by differential quadrature", Steel Compos. Struct., 12(2), 129-147. https://doi.org/10.12989/scs.2012.12.2.129
  18. Naj, R., Sabzikar Boroujerdy, M. and Eslami, M.R. (2008), "Thermal and mechanical instability of functionally graded truncated conical shells", Thin Wall. Struct., 46(1), 65-78. https://doi.org/10.1016/j.tws.2007.07.011
  19. Navazi, H.M. and Haddadpour, H. (2007), "Aero-thermoelastic stability of functionally graded plates", Compos. Struct., 80, 580-587. https://doi.org/10.1016/j.compstruct.2006.07.014
  20. Navazi, H.M. and Haddadpour, H. (2011), "Nonlinear aero-thermoelastic analysis of homogeneous and functionally graded plates in supersonic airflow using coupled models", Compos. Struct., 93, 2554-2565. https://doi.org/10.1016/j.compstruct.2011.04.018
  21. Nguyen, T.K., Thai, H.T. and Vo, P.T. (2015), "A refined higher-order shear deformation theory for bending, vibration and buckling analysis of functionally graded sandwich plates", Steel Compos. Struct., 18(1), 91-120. https://doi.org/10.12989/scs.2015.18.1.091
  22. Nguyen, T.K., Vo, P.T. and Thai, H.T. (2014a), "Vibration and buckling analysis of functionally graded sandwich plates with improved transverse shear stiffness based on the first-order shear deformation theory", Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci., 228(12), 2110-2131. https://doi.org/10.1177/0954406213516088
  23. Nguyen, V.H., Nguyen, T.K., Thai, H.T. and Vo, T.P. (2014b), "A new inverse trigonometric shear deformation theory for isotropic and functionally graded sandwich plates", Compos. Part B: Eng., 66, 233-246. https://doi.org/10.1016/j.compositesb.2014.05.012
  24. Rahmani, O., Khalili, S.M.R. and Malekzadeh, K. (2009), "Free vibration response of composite sandwich cylindrical shell with flexible core", Compos. Struct., 92, 1269-1281.
  25. Rahmani, O., Khalili, S.M.R. and Malekzadeh, K. (2010), "Free vibration response of composite sandwich cylindrical shell with flexible core", Compos. Struct., 92, 1269-1281. https://doi.org/10.1016/j.compstruct.2009.10.021
  26. Reddy, J.N. (2004), Mechanics of Laminated Composite Plates and Shells, Theory and Analysis. CRC Press, New York, USA.
  27. Rezaiee-Pajand, M., Shahabian, F. and Tavakoli, F.H. (2012), "A new higher-order triangular plate bending element for the analysis of laminated composite and sandwich plates", Struct. Eng. Mech., 43(2), 253-271. https://doi.org/10.12989/sem.2012.43.2.253
  28. Sankar, A., Natarajan, S., Ben Zineb, T. and Ganapathi, M. (2015), "Investigation of supersonic flutter of thick doubly curved sandwich panels with CNT reinforced facesheets using higher-order structural theory", Compos. Struct., 127, 340-355. https://doi.org/10.1016/j.compstruct.2015.02.047
  29. Sankar, A., Natarajan, S., Haboussi, M., Ramajeyathilagamc, K. and Ganapathi, M. (2014), "Panel flutter characteristics of sandwich plates with CNT reinforced facesheets using an accurate higher-order theory", J. Fluid. Struct., 50, 376-391. https://doi.org/10.1016/j.jfluidstructs.2014.06.028
  30. Sawyer, J.W. (1977), "Flutter and buckling of general laminated plates", J. Aircraft, 14, 387-393. https://doi.org/10.2514/3.58789
  31. Seresta, O. (2007), "Buckling, flutter, and postbuckling optimization of composite structures", PHD Thesis, Aerospace Engineering, Virginia Polytechnic Institute and State University.
  32. Shiau, L.C., Kuo, S.Y. and Liu, Y.P. (2012), "Aerothermoelastic analysis of composite laminated plates", Compos. Struct., 94, 1982-1990. https://doi.org/10.1016/j.compstruct.2012.01.022
  33. Shin, W.H., Oh, I.K. and Lee, I. (2009), "Nonlinear flutter of aerothermally buckled composite shells with damping treatments", J. Sound Vib., 324, 556-569. https://doi.org/10.1016/j.jsv.2009.02.022
  34. Sohn, K.J. and Kim, J.H. (2009), "Nonlinear thermal flutter of functionally graded panels under a supersonic flow", Compos. Struct., 88, 380-387. https://doi.org/10.1016/j.compstruct.2008.04.016
  35. Song, Z.G. and Li, F.M. (2014), "Aeroelastic analysis and active flutter control of nonlinear lattice sandwich beam", Nonlin. Dyn., 76(1), 57-68. https://doi.org/10.1007/s11071-013-1110-6
  36. Song, Z.G. and Li, F.M. (2016), "Aerothermoelastic analysis of lattice sandwich composite panels in supersonic airflow", Meccanica, 51(4), 877-891. https://doi.org/10.1007/s11012-015-0240-y
  37. Thai, H.T., Nguyen, T.K., Vo, T.P. and Lee, J. (2014), "Analysis of functionally graded sandwich plates using a new first-order shear deformation theory", Eur. J. Mech. A/Solid., 45, 211-225. https://doi.org/10.1016/j.euromechsol.2013.12.008
  38. Wang, Q. (2003), "On complex flutter and buckling analysis of a beam structure subjected to static follower force", Struct. Eng. Mech., 16(5), 533-556. https://doi.org/10.1296/SEM2003.16.05.02
  39. Yang, Z., Zhou, J. and Gu, Y. (2014), "Integrated analysis on static dynamic aeroelasticity of curved panels based on a modified local piston theory", J. Sound Vib., 333, 5885-5897. https://doi.org/10.1016/j.jsv.2014.06.035
  40. Zhao, M.H. and Zhang, W. (2014), "Nonlinear dynamics of composite laminated cantilever rectangular plate subject to third-order piston aerodynamics", Acta Mech., 225, 1985-2004. https://doi.org/10.1007/s00707-013-1035-7
  41. Zhong, C. and Reimerdes, H.G. (2007), "Stability behavior of cylindrical and conical sandwich shells with flexible core", J. Sand. Struct. Mater., 9, 143-166. https://doi.org/10.1177/1099636207068687

피인용 문헌

  1. Analytical solutions for sandwich plates considering permeation effect by 3-D elasticity theory vol.25, pp.2, 2016, https://doi.org/10.12989/scs.2017.25.2.127
  2. Analytical, numerical and experimental investigation of low velocity impact response of laminated composite sandwich plates using extended high order sandwich panel theory vol.68, pp.3, 2018, https://doi.org/10.12989/sem.2018.68.3.325
  3. Elasticity Solutions for Sandwich Arches considering Permeation Effect of Adhesive vol.2020, pp.None, 2016, https://doi.org/10.1155/2020/7358930