Nuclear Engineering and Technology

  • 제48권4호
  • /
  • Pages.906-914
  • /
  • 2016
  • /
  • 1738-5733(pISSN)
  • /
  • 2234-358X(eISSN)
한국원자력학회 (Korean Nuclear Society)
권호 표지
DOI QR코드

DOI QR Code

Mass Transfer Experiments for the Heat Load During In-Vessel Retention of Core Melt

  • Park, Hae-Kyun (Department of Nuclear Engineering, Kyung Hee University) ;
  • Chung, Bum-Jin (Department of Nuclear Engineering, Kyung Hee University)
  • 투고 : 2015.11.07
  • 심사 : 2016.02.10
  • 발행 : 2016.08.25
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

We investigated the heat load imposed on the lower head of a reactor vessel by the natural convection of the oxide pool in a severe accident. Mass transfer experiments using a $CuSO_4-H_2SO_4$ electroplating system were performed based on the analogy between heat and mass transfer. The $Ra^{\prime}_H$ of $10^{14}$ order was achieved with a facility height of only 0.1 m. Three different volumetric heat sources were compared; two had identical configurations to those previously reported, and the other was designed by the authors. The measured Nu's of the lower head were about 30% lower than those previously reported. The measured angular heat flux ratios were similar to those reported in existing studies except for the peaks appearing near the top. The volumetric heat sources did not affect the Nu of the lower head but affected the Nu of the top plate by obstructing the rising flow from the bottom.

키워드

참고문헌

  1. J.M. Bonnet, J.M. Seiler, Thermal hydraulic phenomena in corium pools: the BALI experiment, in: 7th International Conference on Nuclear Engineering, Tokyo, Japan, 1999.
  2. O. Kymalainen, H. Tuomisto, O. Hongisto, T.G. Theofanous, Heat flux distribution from a volumetrically heated pool with high Rayleigh number, Nucl. Eng. Des. 149 (1994) 401-408. https://doi.org/10.1016/0029-5493(94)90305-0
  3. B.R. Sehgal, V.A. Bui, T.N. Dinh, J.A. Green, G. Kolb, SIMECO Experiments on in-vessel melt pool formation and heat transfer with and without a metallic layer, in: Proceedings of In-Vessel Core Debris Retention and Coolability Workshop, Garching, Germany, 1998, pp. 205-213.
  4. J.K. Lee, K.Y. Suh, K.J. Lee, J.I. Yun, Experimental study of natural convection heat transfer in a volumetrically heated semicircular pool, Ann. Nucl. Energy 73 (2014) 432-440. https://doi.org/10.1016/j.anucene.2014.07.019
  5. K.Y. Suh, et al., In-vessel Retention Strategy for High Power Reactors, Korea Electrical Engineering & Science Research Institute, Korea, 2005.
  6. A. Palagin, F. Kretzschmar, LIVE test FSt4: experimental results and simulation by CONV code, in: 13th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, Kanazawa City, Japan, 2009.
  7. F.J. Asfia, V.K. Dhir, An experimental study of natural convection in a volumetrically heated spherical pool bounded on top with a rigid wall, Nucl. Eng. Des. 163 (1996) 333-348. https://doi.org/10.1016/0029-5493(96)01215-0
  8. T.G. Theofanous, M. Maguire, S. Angelini, T. Salmassi, The first results from the ACOPO experiment, Nucl. Eng. Des. 169 (1997) 49-57. https://doi.org/10.1016/S0029-5493(97)00023-X
  9. A. Bejan, Convection Heat Transfer, fourth ed., Wiley & Sons, New Jersey, 2003.
  10. V.G. Levich, Physicochemical Hydrodynamics, Prentice-Hall, Englewood Cliffs, New Jersey, 1962.
  11. J.N. Agar, Diffusion and convection at electrodes, Discuss. Faraday Soc. 26 (1947) 27-37.
  12. C.W. Tobias, R.G. Hickman, Ionic mass transfer by combined free and forced convection, Int. J. Res. Phys. Chem. Chem. Phys. 229 (1965) 145-166.
  13. E.J. Fenech, C.W. Tobias, Mass transfer by free convection at horizontal electrodes, Electrochim. Acta 2 (1960) 311-325. https://doi.org/10.1016/0013-4686(60)80027-8
  14. J.H. Heo, B.J. Chung, Natural convection heat transfer on the outer surface of inclined cylinders, Chem. Eng. Sci. 73 (2012) 366-372. https://doi.org/10.1016/j.ces.2012.02.012
  15. M.S. Chae, B.J. Chung, The effect of pitch-to-diameter on natural convection heat transfer of two vertically aligned horizontal cylinders,, Chem. Eng. Sci. 66 (2011) 5321-5329. https://doi.org/10.1016/j.ces.2011.07.021
  16. S.H. Ko, D.W. Moon, B.J. Chung, Applications of electroplating method for heat transfer studies using analogy concept, Nucl. Eng. Technol. 38 (2006) 251-258.
  17. K.U. Kang, B.J. Chung, The effects of the anode size and position on the limiting currents of natural convection mass transfer experiments of natural convection mass transfer experiments in a vertical pipe, Trans. KSME(B) 34 (2010) 1-8.
  18. J.H. Heo, B.J. Chung, Influence of helical tube dimensions on open channel natural convection heat transfer, Int. J. Heat Mass Transfer 55 (2012) 2829-2834. https://doi.org/10.1016/j.ijheatmasstransfer.2012.02.043
  19. J.Y. Moon, B.J. Chung, Time-dependent RayleigheBenard convection: cell formation and Nusselt number, Nucl. Eng. Des. 274 (2014) 146-153. https://doi.org/10.1016/j.nucengdes.2014.04.017
  20. M.S. Chae, B.J. Chung, Natural convection heat transfer in a uniformly heated horizontal pipe, Heat Mass Transfer 50 (2014) 114-123.
  21. H.K. Park, B.J. Chung, Optimal tip clearance in the laminar forced convection heat transfer of a finned plate in a square duct, Int. Commun. Heat Mass Transfer 63 (2015) 73-81. https://doi.org/10.1016/j.icheatmasstransfer.2015.02.010
  22. J. Krysa, A.A. Wragg, D.M. Thomas, M.A. Patrick, Free convection mass transfer in open upward-facing cylindrical cavities, Chem. Eng. J. 79 (2000) 179-186. https://doi.org/10.1016/S1385-8947(99)00105-9
  23. J. Krysa, D. Houf, C.F. Oduoza, A.A. Wragg, Free convective mass transfer at up-pointing truncated cones, Chem. Eng. J. 85 (2002) 147-151. https://doi.org/10.1016/S1385-8947(01)00219-4
  24. Y. Konishi, Y. Nakamura, Y. Fukunaka, K. Tsukada, K. Hanasaki, Anodic dissolution phenomena accompanying supersaturation of copper sulfate along a vertical plane copper anode, Electrochim. Acta 48 (2003) 2615-2624. https://doi.org/10.1016/S0013-4686(03)00305-0
  25. W.G. Steele, H.W. Coleman, Experimental and Uncertainty Analysis for Engineers, second ed., John Wiley & Son, Canada, 1999.

피인용 문헌

  1. The influence of tip clearance and Prandtl number on turbulent forced convection heat transfer of rectangular fins vol.52, pp.12, 2016, https://doi.org/10.1007/s00231-016-1781-x
  2. Two- and three-dimensional experiments for oxide pool in in-vessel retention of core melts vol.49, pp.7, 2016, https://doi.org/10.1016/j.net.2017.05.008
  3. Numerical Assessment of Prandtl Number Effect on Transient Heat Flux Distribution Imposed on Nuclear Reactor Pressure Vessel by Application of PECM in a Volumetrically Heated Molten Pool vol.11, pp.8, 2016, https://doi.org/10.4236/eng.2019.118035
  4. Influence of Prandtl number, height and lateral cooling condition on laminar natural convection in a rectangular enclosure vol.55, pp.6, 2016, https://doi.org/10.1007/s00231-018-02540-7
  5. Comparisons of 2-D and 3-D IVR experiments for oxide layer in the three-layer configuration vol.52, pp.11, 2016, https://doi.org/10.1016/j.net.2020.04.016
  6. Review of research using analogy concept for thermal hydraulic and severe accident experiments vol.379, pp.None, 2021, https://doi.org/10.1016/j.nucengdes.2021.111257
  7. Influence of crust formation on the heat load to a reactor vessel under an in-vessel retention condition vol.166, pp.None, 2016, https://doi.org/10.1016/j.anucene.2021.108813