Acknowledgement
Supported by : National Natural Foundation of China, Chinese Ministry of Education
References
- Ruff, A.W. and L.K. Ives, 1975, "Measurement of solid particle velocity in erosive wear," Wear, 1975. Vol. 35, No. 1, pp. 195-199. https://doi.org/10.1016/0043-1648(75)90154-4
- Lonergan, R.P. and L.B. Hall, 1958, "A method of predicting the effect of nozzle erosion from water-wettable insecticides on the discharge rates of nozzles," Bull World Health Organ, 1958. Vol. 19, No. 6, pp. 1073-83.
- Thakre, P., et al., 2013, "Mechanical erosion of graphite nozzle in solid-propellant rocket motor," Journal of Propulsion and Power, 2013. Vol. 29, No. 3, pp. 593-601. https://doi.org/10.2514/1.B34630
- Zhang, Y., et al., 2007, "Comparison of computed and measured particle velocities and erosion in water and air flows," Wear, 2007. Vol. 263, No. 1, pp. 330-338. https://doi.org/10.1016/j.wear.2006.12.048
- Arefi, B., A. Settari, and P. Angman, 2005, "Analysis and simulation of erosion in drilling tools," Wear, 2005. Vol. 259, No. 1, pp. 263-270. https://doi.org/10.1016/j.wear.2005.02.095
- Zhu, H.J., et al., 2012, "Numerical analysis of flow erosion on drill pipe in gas drilling," Engineering Failure Analysis, 2012. Vol. 22, No., pp. 83-91. https://doi.org/10.1016/j.engfailanal.2012.01.007
- Zhu, H.J., et al., 2012, "Simulation analysis of flow field and shear stress distribution in internal upset transition zone of drill pipe," Engineering Failure Analysis, 2012. Vol. 21, No., pp. 67-77. https://doi.org/10.1016/j.engfailanal.2011.11.017
- Liu, S.H., H.L. Zheng, and X.H. Zhu, 2014, "Drill string failure analysis and erosion wear study at ket point for gas drilling," Energy Exploration & Exploitation, 2014. Vol. 32, No. 3, pp. 553-568. https://doi.org/10.1260/0144-5987.32.3.553
- Badr, H.M., et al., 2005, "Numerical investigation of erosion threshold velocity in a pipe with sudden contraction," Computers & Fluids, 2005. Vol. 34, No. 6, pp. 721-742. https://doi.org/10.1016/j.compfluid.2004.05.010
- Fard, F.N., B. McLaury, and S. Shirazi, 2012, "Effect of cell size on particle-eddy interaction and erosion predictions using commercial CFD software (FLUENT)," ASME Fluids Engineering Division Summer Meeting. Rio Grande, Puerto Rico, USA.
- Pagalthivarthi, K., et al., 2011, "CFD prediction of erosion wear in centrifugal slurry pumps for dilute slurry flows," The Journal of Computational Multiphase Flows, 2011. Vol. 3, No. 4, pp. 225-246. https://doi.org/10.1260/1757-482X.3.4.225
- Campos Amezcua, A., et al., 2007, "Numerical investigation of the solid particle erosion rate in a steam turbine nozzle," Applied Thermal Engineering, 2007. Vol. 27, No. 14, pp. 2394-2403. https://doi.org/10.1016/j.applthermaleng.2007.03.010
- Chen, J., et al., 2015, "Erosion prediction of liquid-particle two-phase flow in pipeline elbows via CFD-DEM coupling method," Powder Technology, 2015. Vol. 275, No., pp. 182-187. https://doi.org/10.1016/j.powtec.2014.12.057
- Li, Y.N., et al., 1991, "Requirements of normal sprinklers," Water Saving Irrigation, 1991. Vol. 2, No., pp. 10-17.
- Lin, G., 2012, "Influence of sand content irrigation water on the wear and the hydraulic performance of impact sprinkler," Master Thesis, China Agricultural University.
- Xu, Y., G. Lin, and H. Yan, 2014, "Experimental and Numerical Investigation on the Erosion Wear of an Impact Sprinkler," ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting collocated with the ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels.
- Abdolkarimi, V. and R. Mohammadikhah, 2013, "CFD modeling of particulates erosive effect on a commercial scale pipeline bend," ISRN Chemical Engineering, 2013. Vol. 105912, No., pp. 1-10.
- Ou, Y.J., 2008, "Numerical simulation and experimental investigations on inertal flow characteristic of the PY140 Impact sprinkler," Master Thesis, China Agricutural University.