한국지진공학회논문집 (Journal of the Earthquake Engineering Society of Korea)

  • 제20권5호
  • /
  • Pages.319-329
  • /
  • 2016
  • /
  • 1226-525X(pISSN)
  • /
  • 2234-1099(eISSN)
한국지진공학회 (Earthquake Engineering Society of Korea)
권호 표지
DOI QR코드

DOI QR Code

EQS 면진장치의 항복 후 강성을 고려한 면진 원전구조물의 지진응답

Seismic Responses of Seismically Isolated Nuclear Power Plant Structure Considering Post-Yield Stiffness of EQS Bearing

  • Kim, Byeong-Su (Department of Civil Engineering, Kangwon National University) ;
  • Song, Jong-Keol (Department of Civil Engineering, Kangwon National University)
  • 투고 : 2016.05.16
  • 심사 : 2016.07.21
  • 발행 : 2016.09.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The Eradi Quake System (EQS) is a seismic isolation bearing system designed to minimize forces and displacements experienced by structures subjected to ground motion. The EQS dissipates seismic energy through friction of Poly Tetra Fluoro Ethylene (PTFE) disk pad. In general, a force-displacement relationship of EQS has post yield stiffness hardening during large inelastic displacement. In this study, seismic responses of seismically isolated nuclear power plant (NPP) subjected to design basis earthquake (DBE) and beyond design basis earthquakes (150% DBE and 167% DBE) are compared considering the post yield stiffness hardening effect of EQS. From the results, it can be observed that if the post-yield stiffness hardening effect of EQS is increased, the displacement response of EQS is reduced, and the acceleration and shear responses of containment structures of NPP is increased.

키워드

참고문헌

  1. Park HG, Lee YI, Jung DY. Experimental and Analytical Study of the Dynamic Behavior of a Polyurethane Spring Restoring Disk Bearing, Journal of Earthquake Engineering Society of Korea. 2011;15(2): 61-69. https://doi.org/10.5000/EESK.2011.15.2.061
  2. Yu SM, Lee YI, Ji YS, Choi DS, Kim DK. A Study on the Application of EQS bearings for the Seismic Isolation of Building Structures by ICT Case study, Journal of Earthquake Engineering Society of Korea. 2013;17(2): 61-70. https://doi.org/10.5000/EESK.2013.17.2.061
  3. Federal Emergency Management Agency, NEHRP Commentary on the Guidelines for the Seismic Rehabilitation of Buildings(FEMA 274) Ch. 9. Seismic Isolation and Energy Dissipation. c1997.
  4. Lysmer J, Ostadan F, Chin CC. A system for analysis of soil-structure interaction. SASSI 2000 theoretical manual. UC Berkeley. c1999.
  5. Mazzoni S, McKenna F, Scott MH, Fenves GL. OpenSees: Open System of Earthquake Engineering Simulation, Pacific Earthquake Engineering Center, Univ. of Calif., Berkeley. (http://opensees.berkeley.edu), c2007.
  6. Hancock J, Watson-Lamprey J, Abrahamson NA, Bommer JJ, Markatis A, McCoy E, Mendis R. An improved method of matching response spectra of recorded earthquake ground motion using wavelets. Journal of Earthquake Engineering. 2006;10(S1): 67-89.
  7. U.S. Atomic Energy Commision. Regulatory Guide 1.60. Design response spectra for seismic design of nuclear power plants. c1973.
  8. Seok CG. Seismic Response Evaluation of NPP Containment Structures According to Model Characteristics of The Isolation System, Master's thesis Kangwon University. c2015.
  9. Lee YI, Lee YJ, Lee HP, Cho MS, Jee YS, Beak JH. Study on the Performance Improvement of an EQS Device Applied Nuclear Power Plant. Journal of Earthquake Engineering Society of Korea. 2015;19(1): 13-19. https://doi.org/10.5000/EESK.2015.19.1.013
  10. Jung DY. Dynamic and Long-term Behavior Characteristics of Sliding Isolation Disk Bearing with Polyurethane and PTFE. Doctor's thesis Incheon University. c2011.
  11. U.S. Nuclear Regulatory Commission. Technical Considerations for Seismic Isolation of Nuclear Facilities(Draft). c2012.
  12. ASCE, forthcoming. ASCE/SEI 4-16. Seismic analysis of safety-related nuclear structures. Structural Engineering Institute of the American Society of Civil Engineers, Reston, VA.
  13. Oh J, Park KN, Lim TG, Jung HY. An Experimental Study on the Characteristics of Bridge Bearing Using Polyurethane. Journal of Earthquake Engineering Society of Korea. 2008;03:134-141.
  14. Kang TW, Ji YS, Bang IS. The Method of Optimal Stiffness Design for Eradi-Quake System(EQS). Journal of Korean Society of Civil Engineers. 2009: 286-289.
  15. Shim HH, Kwon OK. Friction and Wear Characteristics of PTFEPolyimide Composite. Journal of Korean Society of Tribologists and Lubrication Engineers. 1995;11(4): 28-34.
  16. Oh J, Park KN, Kim HO, Yang YS. Compressive Horizontal Load Dependent Characterization Test of Isolation Disk Bearing. Journal of Korean Society of Civil Engineers. 2009: 2299-2302.

피인용 문헌

  1. Seismic Response Evaluation of Seismically Isolated Nuclear Power Plant Structure Subjected to Gyeong-Ju Earthquake vol.20, pp.7 Special, 2016, https://doi.org/10.5000/EESK.2016.20.7.453
  2. A Probabilistic Study on Seismic Response of Seismically Isolated Nuclear Power Plant Structures using Lead Rubber Bearing vol.22, pp.2, 2018, https://doi.org/10.5000/EESK.2018.22.2.045