DOI QR코드

DOI QR Code

Evaluation of soil-concrete interface shear strength based on LS-SVM

  • Zhang, Chunshun (State Key Lab for Geomechanics and Deep Underground Engineering, China University of Mining and Technology) ;
  • Ji, Jian (Key Lab of Ministry of Education for Geomechanics and Embankment Engineering, Hohai University) ;
  • Gui, Yilin (School of Civil and Environmental Engineering, Nanyang Technological University) ;
  • Kodikara, Jayantha (Department of Civil Engineering, Monash University) ;
  • Yang, Sheng-Qi (State Key Lab for Geomechanics and Deep Underground Engineering, China University of Mining and Technology) ;
  • He, Lei (School of Civil Engineering, Southeast University)
  • Received : 2016.01.27
  • Accepted : 2016.05.10
  • Published : 2016.09.25

Abstract

The soil-concrete interface shear strength, although has been extensively studied, is still difficult to predict as a result of the dependence on many factors such as normal stresses, surface roughness, particle sizes, moisture contents, dilation angles of soils, etc. In this study, a well-known rigorous statistical learning approach, namely the least squares support vector machine (LS-SVM) realized in a ubiquitous spreadsheet platform is firstly used in estimating the soil-structure interface shear strength. Instead of studying the complicated mechanism, LS-SVM enables to explore the possible link between the fundamental factors and the interface shear strengths, via a sophisticated statistic approach. As a preliminary investigation, the authors study the expansive soils that are found extensively in most countries. To reduce the complexity, three major influential factors, e.g., initial moisture contents, initial dry densities and normal stresses of soils are taken into account in developing the LS-SVM models for the soil-concrete interface shear strengths. The predicted results by LS-SVM show reasonably good agreement with experimental data from direct shear tests.

Keywords

Acknowledgement

Supported by : CUMT, National Science Foundation of China

References

  1. AASHTO (1998), Standard Specification for Highway Bridges. American Association of State Highway and Transportation Officials; Washington, D.C., USA.
  2. Abu-Farsakh, M., Coronel, J. and Tao, M. (2007), "Effect of soil moisture content and dry density on cohesive soil-geosynthetic interactions using large direct shear tests", J. Mater. Civil Eng., 19(7), 540-549. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:7(540)
  3. Acar, Y.B., Durgunoglu, H.T. and Tumay, M.T. (1982), "Interface properties of sand", J. Geotech. Geoenviron. Eng., 108(GT4).
  4. Cabalar, A.F. (2016), "Cyclic behavior of various sands and structural materials interfaces", Geomech. Eng., Int. J., 10(1), 1-19.
  5. Chu, L.-M. and Yin, J. (2006), "Study on soil-cement grout interface shear strength of soil nailing by direct shear box testing method", Geomech. Geoeng.: Int. J., 1(4), 259-273. https://doi.org/10.1080/17486020601091742
  6. Evans, M. and Fennick, T. (1995), "Geosynthetic/soil interface friction angles using a rotation shear device", ASTM Geotech. Test. J., 18(2), 271-275. https://doi.org/10.1520/GTJ10327J
  7. Hossain, M.A. and Yin, J.-H. (2013), "Behavior of a pressure-grouted soil-cement interface in direct shear tests", Int. J. Geomech., 14(1), 101-109.
  8. Howard, A.K. (1977), Laboratory Classification of Soils: Unified Soil Classification System; US Department of the Interior, Bureau of Reclamation, Engineering and Research Center, Division of Research, Geotechnical Branch.
  9. Hsu, C.-W., Chang, C.-C. and Lin, C.-J. (2010), A Practical Guide to Support Vector Classication, Department of Computer Science, National Taiwan University.
  10. Hu, L. and Pu, J. (2004), "Testing and modeling of soil-structure interface", J. Geotech. Geoenviron. Eng., 130(8), 851-860. https://doi.org/10.1061/(ASCE)1090-0241(2004)130:8(851)
  11. Huseyin, S.A., Gor, M. and Inal, E. (2016), "A new design chart for estimating friction angle between soil and pile materials", Geomech. Eng., Int. J., 10(3), 315-324. https://doi.org/10.12989/gae.2016.10.3.315
  12. Jewell, R. and Wroth, C. (1987), "Direct shear tests on reinforced sand", Geotechnique, 37(1), 53-68. https://doi.org/10.1680/geot.1987.37.1.53
  13. Ji, J., Zhang, C.S., Kodikara, J. and Yang, S.-Q. (2015), "Prediction of stress concentration factor of corrosion pits on buried pipes by least squares support vector machine", Eng. Fail. Anal., 55, 131-138. https://doi.org/10.1016/j.engfailanal.2015.05.010
  14. Joseph, P.G. (2012), "Physical basis and validation of a constitutive model for soil shear derived from microstructural changes", Int. J. Geomech., 13(4), 365-383.
  15. Joseph, P.G. and Graham-Eagle, J. (2015), "Analytical solution of a dynamical systems soil model", Analytical Methods in Petroleum Upstream Applications; Computer Methods and Recent Advances in Geomechanics, pp. 219-224.
  16. Kang, F., Han, S., Salgado, R. and Li, J. (2015), "System probabilistic stability analysis of soil slopes using Gaussian process regression with Latin hypercube sampling", Comput. Geotech., 63, 13-25. https://doi.org/10.1016/j.compgeo.2014.08.010
  17. Kanji, M. and Wolle, C. (1977), "Residual strength new testing and microstructure", Proceedings of the 9th ICSMFE, Tokyo, Japan, July, Volume 1, pp. 153-154.
  18. Kulhawy, F. and Peterson, M. (1979), "Behavior of sand-concrete interfaces", Proceedings of the 6th Panamerican Conference on Soil Mechanics and Geotechnical Engineering, Lima, Peru, September.
  19. Lupini, J., Skinner, A. and Vaughan, P. (1981), "The drained residual strength of cohesive soils", Geotechnique, 31(2), 181-213. https://doi.org/10.1680/geot.1981.31.2.181
  20. Mitchell, J.K. and Soga, K. (1976), Fundamentals of Soil Behavior, Wiley, New York, NY, USA.
  21. O'Rourke, T., Druschel, S. and Netravali, A. (1990), "Shear strength characteristics of sand-polymer interfaces", J. Geotech. Eng., 116(3), 451-469. https://doi.org/10.1061/(ASCE)0733-9410(1990)116:3(451)
  22. Potyondy, J.G. (1961), "Skin friction between various soils and construction materials", Geotechnique, 11(4), 339-353. https://doi.org/10.1680/geot.1961.11.4.339
  23. Randolph, M., White, D. and Yan, Y. (2012), "Modelling the axial soil resistance on deep-water pipelines", Geotechnique, 62(9), 837-846. https://doi.org/10.1680/geot.12.OG.010
  24. Shakir, R. and Zhu, J. (2009), "Behavior of compacted clay-concrete interface", Frontiers of Architecture and Civil Engineering in China, 3(1), 85-92. https://doi.org/10.1007/s11709-009-0013-6
  25. Standard-IS-1498 (1970), Classification and Identification of Soils for General Engineering Purposes; New Delhi, India.
  26. Suykens, J.A.K. and Vandewalle, J. (1999), "Least squares support vector machine classifiers", Neural Processing Lett., 9(3), 293-300. https://doi.org/10.1023/A:1018628609742
  27. Suykens, J.A.K., De Brabanter, J., Lukas, L. and Vandewalle, J. (2002), "Weighted least squares support vector machines: robustness and sparse approximation", Neurocomputing, 48(1-4), 85-105. https://doi.org/10.1016/S0925-2312(01)00644-0
  28. The Ministry of Water Resources, P.R.C. (1999), Test Methods of Soils, WaterPower Press, Beijing, China; SL237-1999.
  29. Uesugi, M., Kishida, H. and Uchikawa, Y. (1990), "Friction between dry sand and concrete under monotonic and repeated loading", Soils Found., 30(1), 115-128. https://doi.org/10.3208/sandf1972.30.115
  30. Vapnik, V. (2000), The nature of statistical learning theory, Springer Science & Business Media.
  31. Wang, C.H., Jin, K. and Zhan, C. (2013), "Model test studies of the mechanical properties of pile-soil interface", Appl. Mech. Mater., 392, 904-908. https://doi.org/10.4028/www.scientific.net/AMM.392.904
  32. Williams, N. and Houlihan, M. (1987), "Evaluation of interface friction properties between geosynthetics and soils", Proceedings of Geosynthetics, 87, 616-627.
  33. Yoshimi, Y. and Kishida, T. (1981), "Friction between sand and metal surface", Proceedings of the 10th International Conference on Soil Mechanics and Foundation Engineering, Stockholm, Sweden, June.
  34. Zhang, W.G. and Goh, A.T.C. (2013), "Multivariate adaptive regression splines for analysis of geotechnical engineering systems", Comput. Geotech., 48, 82-95. https://doi.org/10.1016/j.compgeo.2012.09.016
  35. Zhao, H., Ru, Z., Chang, X., Yin, S. and Li, S. (2014), "Reliability analysis of tunnel using least square support vector machine", Tunn. Undergr. Space Technol., 41, 14-23. https://doi.org/10.1016/j.tust.2013.11.004

Cited by

  1. Shear strength behavior of crude oil contaminated sand-concrete interface vol.12, pp.2, 2016, https://doi.org/10.12989/gae.2017.12.2.211
  2. Evaluation of concrete compressive strength based on an improved PSO-LSSVM model vol.21, pp.5, 2016, https://doi.org/10.12989/cac.2018.21.5.505
  3. Static behavior of a laterally loaded guardrail post in sloping ground by LS-DYNA vol.15, pp.5, 2018, https://doi.org/10.12989/gae.2018.15.5.1101
  4. Patch load resistance of longitudinally stiffened webs: Modeling via support vector machines vol.29, pp.3, 2016, https://doi.org/10.12989/scs.2018.29.3.309
  5. MARS inverse analysis of soil and wall properties for braced excavations in clays vol.16, pp.6, 2016, https://doi.org/10.12989/gae.2018.16.6.577
  6. Frictional responses of concrete-to-concrete bedding planes under complex loading conditions vol.17, pp.3, 2016, https://doi.org/10.12989/gae.2019.17.3.253
  7. Method using XFEM and SVR to predict the fatigue life of plate-like structures vol.73, pp.4, 2016, https://doi.org/10.12989/sem.2020.73.4.455
  8. Energy analysis-based core drilling method for the prediction of rock uniaxial compressive strength vol.23, pp.1, 2020, https://doi.org/10.12989/gae.2020.23.1.061
  9. Strength prediction of paste filling material based on convolutional neural network vol.37, pp.3, 2016, https://doi.org/10.1111/coin.12373