References
- J. K. Hwang and D. M. Kang, "FE Analysis on the Press Forging of AZ31 Magnesium Alloy," Transactions of KSAE, Vol.14, No.1, pp.86-91, 2006.
- T. W. Yoon, R. H. Kim, M. Y. Lee and R. H. Kim, "Optimization of Forming Condition and Development of Forming Process with Mg Car Body," KSAE Spring Conference Proceedings, pp.1689-1693, 2013.
- M. K. Kulekci, "Magnesium and its Alloys Applications in Automotive Industry," The International Journal of Advenced Manufacturing Technology, Vol.39, pp.851-865, 2008. https://doi.org/10.1007/s00170-007-1279-2
- A. A. Luo, "Magnesium Casting Technology for Structural Applications," Journal of Magnesium and Alloys, Vol.1, Issue 1, pp.2-22, 2013. https://doi.org/10.1016/j.jma.2013.02.002
- M. Kiani, I. Gandikota, M. R. Rohani and K. Motoyama, "Design of Lightweight Magnesium Car Body Structure under Crash and Vibration Constraint," Journal of Magnesium and Alloys, Vol.2, Issue 2, pp.99-108, 2014. https://doi.org/10.1016/j.jma.2014.05.005
- D. Biermann and Y. Liu, "Innovative Flow Drilling on Magnesium Wrought Alloy AZ31," Procedia CIRP, Vol.18, pp.209-214, 2014. https://doi.org/10.1016/j.procir.2014.06.133
- H. Y. Wu, P. H. Sun and F. Z. Lin, "Anisotropic and Tensile Flow Behaviors of Mg Alloy AZ31B Thin Sheet in H24 Condition at Elevated Temperatures," Material Science and Engineering:A, Vol.528, Issue 6, pp.2522-2531, 2011. https://doi.org/10.1016/j.msea.2010.11.082
- M. G. Lee, S. J. Kim, R. H. Wagoner, K. Chung and H. Y. Kim, "Constitutive Modeling for Anisotropic / Asymmetric Hardening Behavior of Magnesium Alloy Sheets: Application to Sheet Springback," International Journal of Plasticity, Vol.25, Issue 4, pp.70-104, 2009. https://doi.org/10.1016/j.ijplas.2007.12.003
- N. T. Nguyen, M. G. Lee, J. H. Kim and H. Y. Kim, "A Practical Constitutive Model for AZ31B Mg Alloy Sheets with Unusual Stressstrain Response," Finite Elements in Analysis and Design, Vol.76, p.3949, 2013.
- N. T. Nguyen, O. S. Seo, C. A. Lee, M. G. Lee, J. H. Kim and H. Y. Kim, "Mechanical Behavior of AZ31B Mg Alloy Sheets under Monotonic and Cyclic Loadings at Room and Moderately Elevated Temperatures," Materials, Vol.7, Issue 2, pp.1271-1295, 2014. https://doi.org/10.3390/ma7021271
- H. Y. Kim, S. C. Choi and H. J. Kim, "Evaluation and Prediction of the Forming Limit of AZ31B Magnesium Alloy Sheet in a Cross-Shaped Cup Deep Drawing Process," Metals and Materials International, Vol.15, No.4, pp.575-584, 2009. https://doi.org/10.1007/s12540-009-0575-9
- M. G. Lee, J. H. Kim, D. Kim, O. S. Seo, N. T. Nguyen and H. Y. Kim, "Anisotropic Hardening of Sheet Metals at Elevated Temperature: Tension-Compressions Test Development and Validation," Experimental Mechanics, Vol.53, Issue 6, pp.1039-1055, 2013. https://doi.org/10.1007/s11340-012-9694-1
- C. A. Lee, M. G. Lee, O. S. Seo, N. T. Nguyen, J. H. Kim and H. Y. Kim, "Cyclic Behavior of AZ31B Mg: Experiments and Non-isothermal Forming Simulations," International Journal of Plasticity, Vol.75, pp.39-62, 2015. https://doi.org/10.1016/j.ijplas.2015.06.005
- J. T. Kim, B. M. Kim and C. G. Kang, "Blank Shape Design Process for a Hot Stamped Front Pillar and its Experimental Verification," Transactions of Materials Processing, Vol.21, Issue 3, pp.186-194, 2012. https://doi.org/10.5228/KSTP.2012.21.3.186