Smart Structures and Systems

  • 제18권3호
  • /
  • Pages.501-523
  • /
  • 2016
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Piezoelectric impedance based damage detection in truss bridges based on time frequency ARMA model

  • Fan, Xingyu (Centre for Infrastructural Monitoring and Protection, School of Civil and Mechanical Engineering, Curtin University) ;
  • Li, Jun (Centre for Infrastructural Monitoring and Protection, School of Civil and Mechanical Engineering, Curtin University) ;
  • Hao, Hong (Centre for Infrastructural Monitoring and Protection, School of Civil and Mechanical Engineering, Curtin University)
  • 투고 : 2015.12.15
  • 심사 : 2016.03.17
  • 발행 : 2016.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

Electromechanical impedance (EMI) based structural health monitoring is performed by measuring the variation in the impedance due to the structural local damage. The impedance signals are acquired from the piezoelectric patches that are bonded on the structural surface. The impedance variation, which is directly related to the mechanical properties of the structure, indicates the presence of local structural damage. Two traditional EMI-based damage detection methods are based on calculating the difference between the measured impedance signals in the frequency domain from the baseline and the current structures. In this paper, a new structural damage detection approach by analyzing the time domain impedance responses is proposed. The measured time domain responses from the piezoelectric transducers will be used for analysis. With the use of the Time Frequency Autoregressive Moving Average (TFARMA) model, a damage index based on Singular Value Decomposition (SVD) is defined to identify the existence of the structural local damage. Experimental studies on a space steel truss bridge model in the laboratory are conducted to verify the proposed approach. Four piezoelectric transducers are attached at different locations and excited by a sweep-frequency signal. The impedance responses at different locations are analyzed with TFARMA model to investigate the effectiveness and performance of the proposed approach. The results demonstrate that the proposed approach is very sensitive and robust in detecting the bolt damage in the gusset plates of steel truss bridges.

키워드

과제정보

연구 과제 주관 기관 : Australian Research Council

참고문헌

  1. Baptista, F.G. and Filho, J.V. (2009), "A new impedance measurement system for PZT-based structural health monitoring", IEEE T. Instrument. Measurement, 58(10), 3602-3608. https://doi.org/10.1109/TIM.2009.2018693
  2. Feng, Z., Liang, M. and Chu, F. (2013), "Recent advances in time-frequency analysis methods for machinery fault diagnosis: a review with application examples", Mech. Syst. Signal Pr., 38(5), 165-205. https://doi.org/10.1016/j.ymssp.2013.01.017
  3. Jachan, M., Hlawatsch, F. and Matz, G. (2005), "Linear methods for TFARMA parameter estimation and system approximation", IEEE Signal Processing Workshop on Statistical Signal Array Processing, 2; 844-852.
  4. Jachan, M., Matz, G. and Hlawatsch, F. (2007), "Time-frequency ARMA models and parameter estimators for underspread nonstationary random processes", IEEE T. Signal Pr., 55(9), 4366-4381. https://doi.org/10.1109/TSP.2007.896265
  5. Li, J. and Hao, H. (2014), "Substructure damage identification based on wavelet domain response reconstruction", Struct. Health Monit., 13(4), 389-405. https://doi.org/10.1177/1475921714532991
  6. Li, J. and Hao, H. (2015), "Damage detection of shear connectors under moving loads with relative displacement measurements", Mech. Syst. Signal Pr., 60-61, 124-150. https://doi.org/10.1016/j.ymssp.2014.09.014
  7. Li, J., Hao, H. and Zhu, H.P. (2014), "Dynamic assessment of shear connectors in composite bridges with ambient vibration measurements", Adv. Struct. Eng., 17(5), 617-638. https://doi.org/10.1260/1369-4332.17.5.617
  8. Liang, C., Sun, F.P. and Rogers, C.A. (1994), "Coupled electro-mechanical analysis of adaptive material systems - determination of the actuator power consumption and system energy transfer", J. Intel. Mat. Syst. Str., 5(1), 12-20. https://doi.org/10.1177/1045389X9400500102
  9. Naidu, A.S.K. (2004), Structural damage identification with admittance signatures of smart PZT transducers, PhD Thesis, Nanyang Technological University, Singapore.
  10. National Transportation Safety Board (2008), "Collapse of I-35W Highway Bridge Minneapolis," Minnesota, Highway Accident Report.
  11. Park, G., Cudney, H. and Inman, D.J. (2000), "Impedance-based health monitoring of civil structural components", J. Infrastruct. Syst. - ASCE, 6(4), 153-160. https://doi.org/10.1061/(ASCE)1076-0342(2000)6:4(153)
  12. Park, S., Lee, J.T., Yun, C.B. and Inman, D.J. (2008), "Electro-mechanical impedance-based wireless structural health monitoring using PCA-data compression and k-means clustering algorithms", J. Intel. Mat. Syst. Str., 19(4), 509-520 https://doi.org/10.1177/1045389X07077400
  13. Park, S., Yun, C.B., Roh, Y. and Lee, J.J. (2005), "Health monitoring of steel structures using impedance of thickness modes at PZT patches", Smart Struct. Syst., 1(4), 339-353. https://doi.org/10.12989/sss.2005.1.4.339
  14. Pavelko, I., Pavelko, V., Kuznetsov, S. and Ozolinsh, I. (2014), "Bolt-joint structural health monitoring by the method of electromechanical impedance", Aircraft Eng. Aerospace Technol., 86(3), 207-214. https://doi.org/10.1108/AEAT-01-2013-0006
  15. Raju, V., Park, G. and Cudney, H. (1998), "Impedance-based health monitoring technique of composite reinforced structures", Proceedings of the 9th International Conference on Adaptive Structures and Technologies.
  16. Rucka, M. and Wilde, K. (2006), "Application of continuous wavelet transform in vibration based damage detection method for beams and plates", J. Sound Vib., 297(3-5), 536-550. https://doi.org/10.1016/j.jsv.2006.04.015
  17. Sohn, H., Allen, D.W., Worden, K. and Farrar, C.R. (2003), "Statistical damage classification using sequential probability ratio tests," Struct. Health Monit., 2(1), 57-74. https://doi.org/10.1177/147592103031113
  18. Song, H., Lim, H.J. and Sohn, H. (2013), "Electromechanical impedance measurement from large structures using a dual piezoelectric transducer", J. Sound Vib., 332(25), 6580-6595. https://doi.org/10.1016/j.jsv.2013.07.023
  19. Stoica, P. and Moses, R. (1997), Introduction to Spectral Analysis, Prentice-Hall, 1st Edition.
  20. Sun, R., Sevillano, E. and Perera, R. (2015), "Debonding detection of FRP strengthened concrete beams by using impedance measurements and an ensemble PSO adaptive spectral model", Compos. Struct., 125, 374-387. https://doi.org/10.1016/j.compstruct.2015.02.011
  21. Tseng, K.K.H. and Naidu, A.S.K. (2002), "Non-parametric damage detection and characterization using smart piezoceramic material", Smart Mater. Struct., 11(3), 317-329. https://doi.org/10.1088/0964-1726/11/3/301
  22. Wang, D., Song, H. and Zhu, H. (2014), "Embedded 3-D electromechanical impedance model for strength monitoring of concrete using PZT transducer", Smart Mater. Struct., 23(11), 115019. https://doi.org/10.1088/0964-1726/23/11/115019
  23. Wang, D., Zhu, H., Chen, C. and Xia, Y. (2007), "An impedance analysis for crack detection in the Timoshenko beam based on the anti-resonance technique", Acta Mech. Solida Sinica, 20(3), 228-235. https://doi.org/10.1007/s10338-007-0727-8
  24. Wax, M. and Kailath, T. (1983), "Efficient inversion of Toeplitz-block Toeplitz matrix", IEEE T. Acoust., Speech Signal Pr., 31(5), 1218-1221. https://doi.org/10.1109/TASSP.1983.1164208
  25. Yang, J.N., Lei, Y., Lin, S. and Huang, N. (2004), "Hilbert-Huang based approach for structural damage detection", J. Eng. Mech. - ASCE, 130(1), 85-95. https://doi.org/10.1061/(ASCE)0733-9399(2004)130:1(85)
  26. Yang, J.N., Lei, Y., Pan, S. and Huang, N. (2003), "System identification of linear structures based on Hilbert-Huang spectral analysis Part 1: Normal modes", Earthq. Eng. Struct. D., 32(9), 1443-1467. https://doi.org/10.1002/eqe.287
  27. Yang, Y.W., Xu, J.F. and Soh, C.K. (2005), "Generic impedance-based model for structure-piezoceramic interacting system", J. Aerospace Eng. - ASCE, 18(2), 93-101. https://doi.org/10.1061/(ASCE)0893-1321(2005)18:2(93)
  28. Yi, T.H., Li, H.N. and Gu, M. (2013a), "Wavelet based multi-step filtering method for bridge health monitoring using GPS and accelerometer", Smart Struct. Syst., 11(4), 331-348. https://doi.org/10.12989/sss.2013.11.4.331
  29. Yi, T.H., Li, H.N. and Sun, H.M. (2013b), "Multi-stage structural damage diagnosis method based on "energy-damage" theory", Smart Struct. Syst., 12(3), 345-361. https://doi.org/10.12989/sss.2013.12.3_4.345

피인용 문헌

  1. The State-of-the-Art on Framework of Vibration-Based Structural Damage Identification for Decision Making vol.7, pp.5, 2017, https://doi.org/10.3390/app7050497
  2. Characterization of Ultrasound Energy Diffusion Due to Small-Size Damage on an Aluminum Plate Using Piezoceramic Transducers vol.17, pp.12, 2017, https://doi.org/10.3390/s17122796
  3. Mechanical impedance based embedded piezoelectric transducer for reinforced concrete structural impact damage detection: A comparative study vol.165, 2018, https://doi.org/10.1016/j.conbuildmat.2018.01.039
  4. Smart concrete slabs with embedded tubular PZT transducers for damage detection vol.27, pp.2, 2018, https://doi.org/10.1088/1361-665X/aa9c72
  5. A novel eddy current array sensing film for quantitatively monitoring hole-edge crack growth in bolted joints vol.28, pp.1, 2018, https://doi.org/10.1088/1361-665X/aae54e
  6. Impedance resonant frequency sensitivity based structural damage identification with sparse regularization: experimental studies vol.28, pp.1, 2018, https://doi.org/10.1088/1361-665X/aaeb7a
  7. Identification of Minor Structural Damage Based on Electromechanical Impedance Sensitivity and Sparse Regularization vol.31, pp.5, 2018, https://doi.org/10.1061/(ASCE)AS.1943-5525.0000892
  8. Grout compactness monitoring of concrete-filled fiber-reinforced polymer tube using electromechanical impedance vol.27, pp.5, 2018, https://doi.org/10.1088/1361-665X/aabaaf
  9. Structural health monitoring data reconstruction of a concrete cable-stayed bridge based on wavelet multi-resolution analysis and support vector machine vol.20, pp.5, 2016, https://doi.org/10.12989/cac.2017.20.5.555
  10. Structural health monitoring using piezoceramic transducers as strain gauges and acoustic emission sensors simultaneously vol.20, pp.5, 2016, https://doi.org/10.12989/cac.2017.20.5.595
  11. A hybrid structural health monitoring technique for detection of subtle structural damage vol.22, pp.5, 2016, https://doi.org/10.12989/sss.2018.22.5.587
  12. PZT transducer array enabled pipeline defect locating based on time-reversal method and matching pursuit de-noising vol.28, pp.7, 2016, https://doi.org/10.1088/1361-665x/ab1cc9
  13. An electromechanical impedance-instrumented corrosion-measuring probe vol.30, pp.14, 2016, https://doi.org/10.1177/1045389x19861776
  14. On-Site Health Monitoring of Composite Bolted Joint Using Built-In Distributed Eddy Current Sensor Network vol.12, pp.17, 2016, https://doi.org/10.3390/ma12172785
  15. A Multi-Model Based Approach for the Detection of Subtle Structural Damage Considering Environmental Variability vol.20, pp.3, 2020, https://doi.org/10.1142/s0219455420500388
  16. Electromechanical impedance instrumented circular piezoelectric-metal transducer for corrosion monitoring: modeling and validation vol.29, pp.3, 2016, https://doi.org/10.1088/1361-665x/ab675c
  17. Monitoring of bolt looseness using piezoelectric transducers: Three-dimensional numerical modeling with experimental verification vol.31, pp.6, 2020, https://doi.org/10.1177/1045389x20906003
  18. Nonlinear damage detection using linear ARMA models with classification algorithms vol.26, pp.1, 2016, https://doi.org/10.12989/sss.2020.26.1.023
  19. Damage Identification in Plate Structures Using Sparse Regularization Based Electromechanical Impedance Technique vol.20, pp.24, 2016, https://doi.org/10.3390/s20247069
  20. Feasibility study on axial pressure detection in smart rubber bearing (SRB) vol.174, pp.None, 2016, https://doi.org/10.1016/j.measurement.2021.109031
  21. A two-dimensional eddy current array-based sensing film for estimating failure modes and tracking damage growth of bolted joints vol.20, pp.3, 2021, https://doi.org/10.1177/1475921719843062
  22. Sensor Networks for Structures Health Monitoring: Placement, Implementations, and Challenges-A Review vol.4, pp.3, 2016, https://doi.org/10.3390/vibration4030033
  23. Review of piezoelectric impedance based structural health monitoring: Physics-based and data-driven methods vol.24, pp.16, 2016, https://doi.org/10.1177/13694332211038444