Structural Engineering and Mechanics

  • 제59권6호
  • /
  • Pages.1121-1137
  • /
  • 2016
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Diagonal bracing of steel frames with multi-cable arrangements

  • Husem, Metin (Department of Civil Engineering, Karadeniz Technical University) ;
  • Demir, Serhat (Department of Civil Engineering, Karadeniz Technical University) ;
  • Park, Hong G. (Department of Architecture,Seoul National University) ;
  • Cosgun, Suleyman I. (Department of Civil Engineering, Karadeniz Technical University)
  • 투고 : 2016.01.15
  • 심사 : 2016.06.28
  • 발행 : 2016.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

A large number of structure in the world were build with poor seismic details, with or without any lateral load resisting system like concentrically braced frames and steel plate shear walls. These structures can reveal deteriorating hysteretic behaviors with stiffness and strength degradation. Therefore, seismic retrofitting of such structures for drift control has vital importance. In this study a retrofit methodology has been developed, which involves diagonal bracing of steel frames with different cable arrangements. In the experimental and numerical program 5 different lateral load resisting system were tested and results compared with each other. The results indicated that multi-cable arrangements suggested in this study showed stable ductile behavior without any sudden decrease in strength. Due to the usage of more than one diagonal cable, fracture of any cable did not significantly affect the overall strength and deformation capacity of the system. In cable braced systems damages concentrated in the boundary zones of the cables and beams. That is why boundary zone must have enough stiffness and strength to resist tension field action of cables.

키워드

참고문헌

  1. Aguero, A., Izvernari, C. and Tremblay, R. (2006), "Modelling of the seismic response of concentrically braced steel frames using the OpenSees analysis environment", Int. J. Adv. Steel Constr., 2(3), 242-274.
  2. American Institute of Steel Construction (AISC) (2005), Specification for Structural Steel Buildings, Chicago.
  3. American Institute o f Steel Construction (AISC) (2007), Steel Plate Shear Walls, Chicago.
  4. Ansys Mechanical (2014), Ansys Inc., Canonsburg, PA.
  5. Broderick, B.M., Elghazouli, A.Y. and Goggins, J. (2008), "Earthquake testing and response analysis of concentrically-braced sub-frames", J. Constr. Steel Res., 64, 997-1007. https://doi.org/10.1016/j.jcsr.2007.12.014
  6. Choi, I.R. and Park, H.G. (2008), "Ductility and energy dissipation capacity of shear dominated steel plate walls", J. Struct. Eng., 135(7), 785-796.
  7. Fanaie, N., Aghajani, S. and Dzaj, E.A. (2016), "Thearetical assessment of the behavior of cable bracing system with central steel cylinder", Adv. Struct. Eng., 19(3), 463-472. https://doi.org/10.1177/1369433216630052
  8. Filiatrault, A. and Tremblay R. (1998), "Design of tension-only concentrically braced steel frames for seismic induced impact loading", Eng. Struct., 20(12), 1087-1096. https://doi.org/10.1016/S0141-0296(97)00205-8
  9. Gupta, A. and Krawinkler, H. (1999), "Seismic demands for performance evaluation steel moment resisting frame structures", Report No. 132, The John A. Blume Earthquake Engineering Center, Dept. of Civil and Env. Eng., Stanford University.
  10. Hadi, M.N.N. and Alrudaini, T.M.S. (2012), "New building scheme to resist progressive collapse", J. Arch. Eng., 18(4), 324-331. https://doi.org/10.1061/(ASCE)AE.1943-5568.0000088
  11. Hou, X. and Tagawa, H. (2009), "Displacement-restraint bracing for seismic retrofit of steel moment frames", J. Constr. Steel Res., 65(5), 1096-1104. https://doi.org/10.1016/j.jcsr.2008.11.008
  12. Mousavi, S.A., Zahrai, S.M. and Saatcioglu, M. (2015), "Toward buckling free tension-only braces using slack free connections", J. Constr. Steel Res., 115, 329-345. https://doi.org/10.1016/j.jcsr.2015.08.048
  13. Mousavi, S.A. and Zahrai, S.M. (2016), "Contribution of pre-slacked cable braces to dynamic stability of non-ductile frames; an analytical study", Eng. Struct., 117, 305-320. https://doi.org/10.1016/j.engstruct.2016.03.013
  14. Sabelli, R. and Bruneau, M. (2007), "Steel Plate Shear Walls (AISC Design Guide)", American Institute of Steel Construction, Inc., Chicago, Illinois.
  15. Tamai, H. and Takamatsu, T. (2005), "Cyclic loading test on a non-compression brace considering performance based seismic design", J. Constr. Steel Res., 61(9), 1301-1317. https://doi.org/10.1016/j.jcsr.2005.01.009
  16. Thorburn, L.J., Kulak, G.L. and Montgomery, C.J. (1983), "Analysis of steel plate shear walls", Structural Engineering Rep. No. 114, Dept. of Civil Engineering, Univ. of Alberta, Edmonton, Albta., Canada.
  17. Timler, P.A., Ventura, C.E., Prion, H. and Anjam, R. (1998), "Experimental and analytical studies of steel plate shear walls as applied to the design of tall buildings", Struct. Des. Tall Build., 7, 233-249. https://doi.org/10.1002/(SICI)1099-1794(199809)7:3<233::AID-TAL111>3.0.CO;2-I
  18. Tremblay, R. and Filiatrault, A. (1996), "Seismic impact loading in inelastic tension-only concentrically braced steel frames: myth or reality?", Earthq. Eng. Struct. Dyn., 25, 1373-1389. https://doi.org/10.1002/(SICI)1096-9845(199612)25:12<1373::AID-EQE615>3.0.CO;2-Y
  19. Tremblay, R. (2001), "Seismic behavior and design of concentrically braced frames", Eng. J., 38(3), 148-66.
  20. Wang, W., Zhou, Q., Chen, Y., Tong, L. and Chan, T.M. (2013), "Experimental and numerical investigation on full-scale tension-only concentrically braced steel beam-through frames", J. Constr. Steel Res., 80, 369-385. https://doi.org/10.1016/j.jcsr.2012.10.002

피인용 문헌

  1. The cyclic behavior of steel-polyoxymethylene composite braces vol.70, pp.5, 2016, https://doi.org/10.12989/sem.2019.70.5.591