Computers and Concrete

  • 제18권3호
  • /
  • Pages.405-420
  • /
  • 2016
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Remote sensing and photogrammetry techniques in diagnostics of concrete structures

  • Janowski, Artur (Faculty of Civil and Environmental Engineering, Gdansk University of Technology) ;
  • Nagrodzka-Godycka, Krystyna (Faculty of Civil and Environmental Engineering, Gdansk University of Technology) ;
  • Szulwic, Jakub (Faculty of Civil and Environmental Engineering, Gdansk University of Technology) ;
  • Ziolkowski, Patryk (Faculty of Civil and Environmental Engineering, Gdansk University of Technology)
  • 투고 : 2015.05.01
  • 심사 : 2016.03.30
  • 발행 : 2016.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

Recently laser scanning technologies become widely used in many areas of the modern economy. In the following paper authors show a potential spectrum of use Terrestrial Laser Scanning (TLS) in diagnostics of reinforced concrete elements. Based on modes of failure analysis of reinforcement concrete beam authors describe downsides and advantages of adaptation of terrestrial laser scanning to this purpose, moreover reveal under which condition this technology might be used. Research studies were conducted by Faculty of Civil and Environmental Engineering at Gdansk University of Technology. An experiment involved bending of reinforced concrete beam, the process was registered by the terrestrial laser scanner. Reinforced concrete beam was deliberately overloaded and eventually failed by shear. Whole failure process was tracing and recording by scanner Leica ScanStation C10 and verified by synchronous photographic registration supported by digital photogrammetry methods. Obtained data were post-processed in Leica Cyclone (dedicated software) and MeshLab (program on GPL license). The main goal of this paper is to prove the effectiveness of TLS in diagnostics of reinforced concrete elements. Authors propose few methods and procedures to virtually reconstruct failure process, measure geometry and assess a condition of structure.

키워드

참고문헌

  1. Bencardino, F. and Condello, A. (2014), "Experimental study and numerical investigation of behavior of RC beams strengthened with steel reinforced grout", Comput. Concrete, 14(6), 711-725. https://doi.org/10.12989/cac.2014.14.6.711
  2. Blaszczak-Bak, W., Janowski, A., Kaminski, W. and Rapinski, J. (2015), "Application of the Msplit method for filtering airborne laser scanning data-sets to estimate digital terrain models", Int. J. Remote Sens., 36(9), 2421-2437. https://doi.org/10.1080/01431161.2015.1041617
  3. Daliga, K. and Kuralowicz, Z. (2016), "Examination method of the effect of the incidence angle of laser beam on distance measurement accuracy to surfaces with different colour and roughness", Boletim de Ciencias Geodesicas, 22(3)
  4. Dias-da-Costa, D., Valenca, J. and do Carmo, R.N.F. (2014), "Curvature assessment of reinforced concrete beams using photogrammetric techniques", Mater. Struct., 47(10), 1745-1760. https://doi.org/10.1617/s11527-013-0148-8
  5. Duane, C.B. (1971), "Close-range camera calibration", Photogramm. Eng., 37(8), 855-866.
  6. Fryer, J.G. and Brown, D.C. (1986), "Lens distortion for close-range photogrammetry", Photogramm. Eng. Remote Sens., 52(1), 51-58.
  7. Godycki-Cwirko, T. (1992), "Crack morphology in concrete structures", Sci. Study, 13, 149.
  8. Gonzalez-Aguilera, D., Gomez-Lahoz, J. and Sanchez, J. (2008), "A new approach for structural monitoring of large dams with a three-dimensional laser scanner", Sensors, 8(9), 5866-5883. https://doi.org/10.3390/s8095866
  9. Gordon, S.J. and Lichti, D.D. (2007), "Modeling terrestrial laser scanner data for precise structural deformation measurement", J. Survey. Eng., 133(2), 72-80. https://doi.org/10.1061/(ASCE)0733-9453(2007)133:2(72)
  10. Goszczynska, B., Swit, G. and Trampczynski, W. (2015), "Analysis of the microcracking process with the Acoustic Emission method with respect to the service life of reinforced concrete structures with the example of the RC beams", Bull. Polish Academy Sci. Tech., 63(1), 55-63. https://doi.org/10.1515/bpasts-2015-0007
  11. Hartley, R.I. (1997), "In defense of the eight-point algorithm. Pattern analysis and machine intelligence", Proceedings of the IEEE Transactions on, 19(6), 580-593.
  12. Hejmanowska, B., Przyborski, M., Pyka, K. and Pyrchla, J. (2015), "Modern remote sensing and the challenges facing education systems in terms of its teaching", Proceedings of the 7th International Conference on Education and New Learning Technologies, 6549-6558, Barcelona, Spain
  13. Janowski, A. and Rapinski, J. (2013), "M-split estimation in laser scanning data modeling", J. Indian Soc. Remote Sens., 41(1), 15-19. https://doi.org/10.1007/s12524-012-0213-8
  14. Janowski, A. and Szulwic, J. (2014), "Synchronic digital stereophotography and photogrammetric analyses in monitoring the flow of liquids in open channels", Proceedings of the 9th ICEE, 2029-7092.
  15. Janowski, A., Nagrodzka-Godycka, K., Szulwic, J. and Ziolkowski, P. (2014), "Modes of failure analysis in reinforced concrete beam using laser scanning and synchro-photogrammetry", Proceedings of the 2nd Int. Conference on Adv. Civil, Struct. Envir. Eng., 16-20.
  16. Janowski, A., Sawicki, P. and Szulwic, J. (2005), "Advanced 3D visualization of an architectural object in the openGL standard", Int. Arch. Photogramm., Remote Sens. Spatial Inform. Sci., 36(2).
  17. Kohut, P., Mikrut, S., Pyka, S., Tokarczyk, R. and Uhl, T. (2012), "Research on the prototype of rail clearance measurement system", Proceedings of the 22nd Congress of the International-Society-for-Photogrammetry-and-Remote-Sensing, 25 Aug.-01 Sep. 2012, Melbourne, Australia. Book Series: International Archives of the Photogrammetry Remote Sensing and Spatial Information Sciences, 39, B4.
  18. Koken, A., Koroglu, M.A., Karabork, H. and Ceylan, A. (2014), "Photogrammetric approach in determining beam-column connection deformations", Boletim de Ciencias Geodesicas, 20(3), 720-733. https://doi.org/10.1590/S1982-21702014000300041
  19. Kopanska, A. and Nagrodzka-Godycka, K. (2016), "The influence of reinforcement on load carrying capacity and cracking of the reinforced concrete deep beam joint", Eng. Struct., 107, 23-33. https://doi.org/10.1016/j.engstruct.2015.11.001
  20. Kwak, E., Detchev, I., Habib, A., El-Badry, M. and Hughes, C. (2013), "Precise photogrammetric reconstruction using model-based image fitting for 3D beam deformation monitoring", J. Survey. Eng., 139(3), 143-155. https://doi.org/10.1061/(ASCE)SU.1943-5428.0000105
  21. Lichti, D.D., Jamtsho, S., El-Halawany, S.I., Lahamy, H., Chow, J., Chan, T.O. and El-Badry, M. (2011), "Structural deflection measurement with a range camera", J. Survey. Eng., 138(2), 66-76.
  22. Moradi-Marani, F., Rivard, P., Lamarche, C.P. and Kodjo, S.A. (2014), "Evaluating the damage in reinforced concrete slabs under bending test with the energy of ultrasonic waves", Constr. Build. Mater., 73, 663-673. https://doi.org/10.1016/j.conbuildmat.2014.09.050
  23. Nagrodzka-Godycka, K., Szulwic, J. and Ziolkowski, P. (2014), "The method of analysis of damage reinforced concrete beams using terrestrial laser scanning", Proceedings of the 14th SGEM GeoConference on Informatics, Geoinformatics and Remote Sensing, 3, 335-342.
  24. Nagrodzka-Godycka, K., Szulwic, J. and Ziolkowski, P. (2015), "Method of selective fading as a educational tool to study the behaviour of prestressed concrete elements under excess loading", Proceedings of the ICERI2015, 472-479
  25. Olsen, M.J., Kuester, F., Chang, B.J. and Hutchinson, T.C. (2009), "Terrestrial laser scanning-based structural damage assessment", J. Comput. Civil Eng., 24(3), 264-272. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000028
  26. Paszotta, Z. and Szumilo, M. (2010), "A web-based approach for online digital terrain model and orthoimage generation", Proceedings of the 1st International Workshop on pervasive Web Mapping, Geoprocessing and Services, 26-27.
  27. Qi, X., Lichti, D., El-Badry, M., Chow, J. and Ang, K. (2014), "Vertical dynamic deflection measurement in concrete beams with the Microsoft kinect", Sensors, 14(2), 3293-3307. https://doi.org/10.3390/s140203293
  28. Rucka, M. and Wilde, K. (2013), "Experimental study on ultrasonic monitoring of splitting failure in reinforced concrete", J. Nondestr. Eval., 32(4), 372-383. https://doi.org/10.1007/s10921-013-0191-y
  29. Szulwic, J., Burdziakowski, P., Janowski, A., Przyborski, M., Tysiac, P., Wojtowicz, A.,...and Matysik, M. (2015), "Maritime laser scanning as the source for spatial data", Polish Maritime Res., 22(4), 9-14.
  30. Teza, G., Galgaro, A. and Moro, F. (2009), "Contactless recognition of concrete surface damage from laser scanning and curvature computation", NDT & E Int., 42(4), 240-249. https://doi.org/10.1016/j.ndteint.2008.10.009
  31. Wang, W. and Tsui, H.T. (2000), "A SVD decomposition of essential matrix with eight solutions for the relative positions of two perspective cameras", Proceedings 15th International Conference Pattern Recognition, 1, 362-365.
  32. Windisch A. (1988), "Das Modell der charakteristischen Bruchguerschnitte", Beton und Stahlbetonbau, 83(9), 251-255. https://doi.org/10.1002/best.198800400

피인용 문헌

  1. Bus bays inventory using a terrestrial laser scanning system vol.122, 2017, https://doi.org/10.1051/matecconf/201712204001
  2. As- built inventory of the office building with the use of terrestrial laser scanning vol.26, 2018, https://doi.org/10.1051/e3sconf/20182600011
  3. Searching for road deformations using mobile laser scanning vol.122, 2017, https://doi.org/10.1051/matecconf/201712204004
  4. A Moving 3D Laser Scanner for Automated Underbridge Inspection vol.5, pp.4, 2017, https://doi.org/10.3390/machines5040032
  5. A Static Displacement Monitoring System for VLBI Antenna Using Close-Range Photogrammetry vol.7, pp.11, 2017, https://doi.org/10.3390/app7111125
  6. Monitoring of Bridges by a Laser Pointer: Dynamic Measurement of Support Rotations and Elastic Line Displacements: Methodology and First Test vol.18, pp.2, 2018, https://doi.org/10.3390/s18020338
  7. Implementation of Spatial Information for Monitoring and Analysis of the Area Around the Port Using Laser Scanning Techniques vol.24, pp.s1, 2017, https://doi.org/10.1515/pomr-2017-0015
  8. Range Image Technique for Change Analysis of Rock Slopes Using Dense Point Cloud Data vol.10, pp.11, 2018, https://doi.org/10.3390/rs10111792
  9. Testing Contraction and Thermal Expansion Coefficient of Construction and Moulding Polymer Composites vol.25, pp.s1, 2018, https://doi.org/10.2478/pomr-2018-0036
  10. Computational simulations of the cable-stayed bridge over the Vistula River in Krakow vol.219, pp.2261-236X, 2018, https://doi.org/10.1051/matecconf/201821903007
  11. Mobile Laser Scanning Calibration on A Marine Platform vol.25, pp.s1, 2018, https://doi.org/10.2478/pomr-2018-0037
  12. A novel method of combined interval analysis and homotopy continuation in indoor building reconstruction pp.1029-0273, 2019, https://doi.org/10.1080/0305215X.2018.1472253
  13. The application of non-destructive methods in the diagnostics of the approach pavement at the bridges vol.356, pp.1757-899X, 2018, https://doi.org/10.1088/1757-899X/356/1/012023
  14. Technical Monitoring System for a New Part of Gdańsk Deepwater Container Terminal vol.24, pp.1, 2016, https://doi.org/10.1515/pomr-2017-0033
  15. Internet Photogrammetry for Inspection of Seaports vol.24, pp.1, 2017, https://doi.org/10.1515/pomr-2017-0036
  16. Morphological segmentation based on edge detection-II for automatic concrete crack measurement vol.21, pp.6, 2016, https://doi.org/10.12989/cac.2018.21.6.727
  17. A Component Decomposition Model for 3D Laser Scanning Pavement Data Based on High-Pass Filtering and Sparse Analysis vol.18, pp.7, 2018, https://doi.org/10.3390/s18072294
  18. Economical and Safe Method of Granular Material Storage in Silos in Offshore Port Terminals vol.25, pp.3, 2016, https://doi.org/10.2478/pomr-2018-0097
  19. Deformation Analysis of a Composite Bridge during Proof Loading Using Point Cloud Processing vol.18, pp.12, 2016, https://doi.org/10.3390/s18124332
  20. An Image Copy-Move Forgery Detection Scheme Based on A-KAZE and SURF Features vol.10, pp.12, 2016, https://doi.org/10.3390/sym10120706
  21. Combined Close Range Photogrammetry and Terrestrial Laser Scanning for Ship Hull Modelling vol.9, pp.5, 2016, https://doi.org/10.3390/geosciences9050242
  22. Short and Long Term Measurements in Assessment of FRP Composite Footbridge Behavior vol.13, pp.3, 2016, https://doi.org/10.3390/ma13030525
  23. TLS and SfM Approach for Bulk Density Determination of Excavated Heterogeneous Raw Materials vol.10, pp.2, 2016, https://doi.org/10.3390/min10020174
  24. 3D Point Cloud Analysis for Damage Detection on Hyperboloid Cooling Tower Shells vol.12, pp.10, 2016, https://doi.org/10.3390/rs12101542
  25. Improving project communication in the architecture, engineering and construction industry: Coupling virtual reality and laser scanning vol.30, pp.None, 2016, https://doi.org/10.1016/j.jobe.2020.101287
  26. Treatment of Determination Method for Strength Characteristics of Reinforcing Steel by Using Thread Cutting Method after Temperature Influence vol.1006, pp.None, 2020, https://doi.org/10.4028/www.scientific.net/msf.1006.179
  27. Suitability of Aerial Photogrammetry for Dump Documentation and Volume Determination in Large Areas vol.11, pp.14, 2016, https://doi.org/10.3390/app11146564