Steel and Composite Structures

  • 제21권5호
  • /
  • Pages.1157-1182
  • /
  • 2016
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Shear resistance behaviors of a newly puzzle shape of crestbond rib shear connector: An experimental study

  • Chu, Thi Hai Vinh (Faculty of Civil Engineering, MienTrung University of Civil Engineering) ;
  • Bui, Duc Vinh (Department of Civil Engineering, Ho Chi Minh City University of Technology) ;
  • Le, Van Phuoc Nhan (Department of Civil Engineering, Ho Chi Minh City University of Technology) ;
  • Kim, In-Tae (Department of Civil Engineering, Pusan National University) ;
  • Ahn, Jin-Hee (Department of Civil Engineering, Gyeongnam National University of Science and Technology) ;
  • Dao, Duy Kien (Department of Civil Engineering, Pusan National University)
  • 투고 : 2016.02.23
  • 심사 : 2016.07.30
  • 발행 : 2016.08.10
⟨ 이전 논문 다음 논문 ⟩

초록

A newly puzzle shape of crestbond rib shear connector is a type of ductile perfobond rib shear connector. This shear connector has some advantages, including relatively easy rebar installation and cutting, as well as the higher shear resistance strength. Thus, this study proposed a newly puzzle shape of crestbond rib with a "${\mho}$" shape, and its shear resistance behaviors and shear strengths were examined using push-out tests. Five main parameters were considered in the push-out specimens to evaluate the effects of shear resistance parameters such as the dimensions of the crestbond rib, transverse rebars in the crestbond dowel, concrete strength, rebar strength, and dowel action on the shear strength. The shear loading test results were used to compare the changes in the shear behaviors, failure modes, and shear strengths. It was found that the concrete strength and number of transverse rebars in the crestbond rib were significantly related to its shear resistance. After the initial bearing resistance behavior of the concrete dowel, a relative slip occurred in all the specimens. However, its rigid behavior to shear loading decreased the ductility of the shear connection. The cross-sectional area of the crestbond rib was also shown to have a minor effect on the shear resistance of the crestbond rib shear connector. The failure mechanism of the crestbond rib shear connector was complex, and included compression, shear, and tension. As a failure mode, a crack was initiated in the middle of the concrete slab in a vertical direction, and propagated with increasing shear load. Then, horizontal cracks occurred and propagated to the front and rear faces of the specimens. Based on the results of this study, a design shear strength equation was proposed and compared with previously suggested equations.

키워드

과제정보

연구 과제 주관 기관 : National Research Foundation of Korea (NRF)

참고문헌

  1. Ahn, J.H., Lee, C.G. and Won, J.H. (2010), "Shear resistance of the perfobond rib shear connector depending on concrete strength and rib arrangement", J. Construct. Steel Res., 66(10), 1295-1307. https://doi.org/10.1016/j.jcsr.2010.04.008
  2. Bui, D.V. (2010), "Behaviour of Steel-Concrete Composite beams made of Ultra high performance concrete", Der Wirtschaftswissenschaftlichen Fakultater Universitat Leipzig, Leipzig, 9th October 2010.
  3. Chromiak, P. and Studnicka, J. (2006), "Load Capacity of Perforated Shear Connector", Int. J. Eng. Inform. Sci., 1(3), 23-30.
  4. European Committee for Standardization (Hrsg.) (2004), Eurocode 4: Design of composite steel and concrete structures, European Committee for Standardization.
  5. Jayas, B.S. and Hosain, M.U. (1989), "Behaviour of headed studs in composite beams: full-size tests", Can. J. Civil Eng., 16(5), 712-724. https://doi.org/10.1139/l89-106
  6. Kim, S.H., Lee, C.G., Davaadorj, A., Yoon, J.H. and Won, J.H. (2010), "Experimental evaluation of joints consisting of parallel perfobond ribs in steel-PSC hybrid beams", Int. J. Steel Struct., 10(4), 373-384.
  7. Kim, S.H., Ahn J.H., Choi, K.T. and Jung, C.Y. (2011), "Experimental evaluation of the shear resistance of corrugated perfobond rib shear connections", Adv. Struct. Eng., 14(2), 249-263. https://doi.org/10.1260/1369-4332.14.2.249
  8. Kim, S.H., Choi, K.T., Park, S.J., Park, S.M. and Jung, C.Y. (2013), "Experiment shear resistance evaluation of Y-type perfobond rib shear connector", J. Construct. Steel Res., 82, 1-18. https://doi.org/10.1016/j.jcsr.2012.12.001
  9. Kim, S.H., Choi, J., Park, S.J., Ahn, J.H. and Jung, C.Y. (2014a), "Behavior of composite girder with Y-type perfobond rib shear connector", J. Construct. Steel Res., 103, 275-289. https://doi.org/10.1016/j.jcsr.2014.09.012
  10. Kim, S.H., Heo, W.H., Woo, K.S., Jung, C.Y. and Park, S.J. (2014b), "End bearing resistance of Y-type perfobond rib according to rib width-height ratio", J. Construct. Steel Res., 103, 101-116. https://doi.org/10.1016/j.jcsr.2014.08.003
  11. Kim, S.H., Park, S.J., Heo, W.H. and Jung, C.Y. (2015), "Shear resistance characteristic and ductility of Ytype perfobond rib shear connector", Steel Compos. Struct., Int. J., 18(2), 497-517. https://doi.org/10.12989/scs.2015.18.2.497
  12. Kraus, D. and Wurzer, O. (1997), "Nonlinear finite-element analysis of concrete dowels", Comput. Struct., 64(5-6), 1271-1279. https://doi.org/10.1016/S0045-7949(97)00034-5
  13. Leonhardt, F., Andra, W., Andra, H.P. and Harre, W. (1987), "Vorteilhaftes Verbundmittel fur Stahlvebund-Tragwerke mit hoher Dauerfestigkeit", Beton und Stahlbetonbau, 82(12), 325-331. https://doi.org/10.1002/best.198700500
  14. Lorenc, W., Kubica, E. and KoŻuch, M. (2010), "Testing procedures in evaluation of resistance of innovative shear connection with composite dowels", Archives Civil Mech. Eng., 10(3), 51-63. https://doi.org/10.1016/S1644-9665(12)60136-8
  15. Maleki, S. and Bagheri, S. (2008), "Behavior of channel shear connectors, Part I: Experimental study", J. Construct. Steel Res., 64(12), 1333-1340. https://doi.org/10.1016/j.jcsr.2008.01.010
  16. Maleki, S. and Mahoutian, M. (2009), "Experimental and analytical study on channel shearconnectors in fiber-reinforced concrete", J. Construct. Steel Res., 65(8-9), 1787-1793 https://doi.org/10.1016/j.jcsr.2009.04.008
  17. Medberry, S. and Shahrooz, B. (2002), "Perfobond shear connector for composite construction", AISC Eng. J., 39(1), 1048-1056.
  18. Mohammad, M.A., Ayad, S.A. and Bilavari, K. (2011), "Performance evaluation of shear stud connectors in composite beams with steel plate and RCC slab", Int. J. Earth Sci. Eng., 4(6), 586-591.
  19. Oguejiofor, E.C. and Hosain, M.U. (1994), "A parametric study of perfobond rib shear connectors", Can. J. Civil Eng., 21(4), 614-625. https://doi.org/10.1139/l94-063
  20. Oguejiofor, E.C. and Hosain, M.U. (1997), "Numerical analysis of push-out specimens with perforbond rib connectors", Comput. Struct., 62(4), 617-624. https://doi.org/10.1016/S0045-7949(96)00270-2
  21. PreCo-Beam (2006), Prefabricated enduring composite beams based on innovative shear transmission, Final Report; Research Fund for Coal and Steel, Contract No. RFSR-CT-2006-00030. 01/07/2006-30/06/2009. http://www.stb.rwth-aachen.de/projekte/2005/INTAB/downloadPreco.php
  22. Preco+ (2011), Prefabricated Enduring Composite Beams based on innovative Shear Transmission; RFCS RFS2-CT-2011-00026, Research Fund for Coal and Steel (RFCS) of the European Community, EU, http://www.stb.rwth-aachen.de/projekte/2005/INTAB/downloadPreco.php
  23. Shariati, M., Ramli, N.H., Arabnejad, M.M. Sulong, K.H. and Mahoutian, M. (2011), "Shear resistance of channel shear connectors in plain, reinforced and lightweight concrete", Sci. Res. Essays, 6(4), 977-983.
  24. Shariati, M., Ramli Sulong, N.H., Suhatril, M., Shariati, A., Arabnejad Khanouki, M.M. and Sinaei, H. (2012), "Behaviour of C-shaped angle shear connectors under monotonic and fully reversed cyclic loading: An experimental study", Mater. Des., 41, 67-73. https://doi.org/10.1016/j.matdes.2012.04.039
  25. Shariati, M., Ramli Sulong, N.H., Shariati, A. and Khanouki, M.A. (2016a), "Behavior of V-shaped angle shear connectors: experimental and parametric study", Mater. Struct., 49(9), 3909-3926. https://doi.org/10.1617/s11527-015-0762-8
  26. Shariati, M., Ramli Sulong, N.H., Shariati, A. and Kueh, A.B.H. (2016b), "Comparative performance of channel and angle shear connectors in high strength concrete composites: An experimental study", Construct. Build. Mater., 120, 382-392 https://doi.org/10.1016/j.conbuildmat.2016.05.102
  27. Shim, C.S., Lee, P.G., Kim, D.W. and Chung, C.H. (2011), "Effects of group arrangement on the ultimate strength of stud shear connection", Compos. Construct. Steel Concrete, 6, 92-101.
  28. Suhaib, Y.K.A.D. and Liu, C.Y.Q. (2007), "Finite element simulation and parametric studies of perfobond rib connector", Am. J. Appl. Sci., 4(3), 122-127. https://doi.org/10.3844/ajassp.2007.122.127
  29. Tue, N., Vinh, B.D. and Kuechler, M. (2008), "Perfobond rib shear connector made of UHPC", Proceedings of the 11th East Asia-Pacific Conference on Structural Engineering & Construction (EASEC-11), Taipei, Taiwan, November.
  30. Valente, I. and Cruz, P.J.S. (2004), "Experimental analysis of Perfobond shear connection between steel and lightweight concrete", J. Construct. Steel Res., 60(3-5), 465-479. https://doi.org/10.1016/S0143-974X(03)00124-X
  31. Verissimo, G.S., Valente, M.I.B., Paes, J.L.R., Cruz, P.J.S. and Fakury, R.H. (2006), "Design and experimental analysis of a new shear connector for steel and concrete composite structures", Proceedings of the 3rd International Conference on Bridge Maintenance, Safety and Management, Porto, Portugal, July, pp. 68-72.
  32. Vianna, J.d.C., Costa-Neves, L.F., Vellasco, P.C.G.d.S. and de Andrade, S.A.L. (2008), "Structural behaviour of T-Perfobond shear connectors in composite girders: An experimental approach", Eng. Struct., 30(9), 2381-2391. https://doi.org/10.1016/j.engstruct.2008.01.015
  33. Vianna, J.d.C., Costa-Neves, L.F., Vellasco, P.C.G.d.S. and de Andrade, S.A.L. (2009), "Experimental assessment of Perfobond and T-Perfobond shear connectors' structural response", J. Construct. Steel Res., 65(2), 408-421. https://doi.org/10.1016/j.jcsr.2008.02.011
  34. Xue, D., Liu, Y., Yu, Z. and He, J. (2012), "Static behavior of multi-stud shear connectors for steel-concrete composite bridge", J. Construct. Steel Res., 74, 1-7. https://doi.org/10.1016/j.jcsr.2011.09.017

피인용 문헌

  1. Assessing the pry-out resistance of open rib shear connectors in cracked concrete – Engineering model with aggregate interlock vol.148, 2017, https://doi.org/10.1016/j.engstruct.2017.06.050
  2. Shear-slip behaviour and ductility of composite dowel connectors with pry-out failure vol.150, 2017, https://doi.org/10.1016/j.engstruct.2017.07.065
  3. Behavior of steel and concrete composite beams with a newly puzzle shape of crestbond rib shear connector: an experimental study vol.60, pp.6, 2016, https://doi.org/10.12989/sem.2016.60.6.1001
  4. Shear Tests on Composite Dowel Rib Connectors in Cracked Concrete vol.115, pp.3, 2018, https://doi.org/10.14359/51701295
  5. 연속 캡 형상 전단연결재의 전단 내력에 관한 실험 연구 vol.19, pp.2, 2016, https://doi.org/10.9712/kass.2019.19.2.91
  6. Behavior of grouped stud shear connectors between precast high-strength concrete slabs and steel beams vol.34, pp.6, 2016, https://doi.org/10.12989/scs.2020.34.6.837
  7. Computational analysis of three dimensional steel frame structures through different stiffening members vol.35, pp.2, 2016, https://doi.org/10.12989/scs.2020.35.2.187
  8. Load-slip curves of shear connection in composite structures: prediction based on ANNs vol.36, pp.5, 2016, https://doi.org/10.12989/scs.2020.36.5.493
  9. Experimental study on the hybrid shear connection using headed studs and steel plates vol.37, pp.6, 2020, https://doi.org/10.12989/scs.2020.37.6.649
  10. Application of a newly puzzle shaped crestbond rib shear connector in composite beam using inverted T steel girder: An experimental study vol.79, pp.1, 2021, https://doi.org/10.12989/sem.2021.79.1.117