Steel and Composite Structures

  • 제21권5호
  • /
  • Pages.1105-1119
  • /
  • 2016
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A new developed approach for EDL induced from a single concentrated force

  • Bekiroglu, Serkan (Yildiz Technical University, Department of Civil Engineering) ;
  • Arslan, Guray (Yildiz Technical University, Department of Civil Engineering) ;
  • Sevim, Baris (Yildiz Technical University, Department of Civil Engineering)
  • 투고 : 2015.07.13
  • 심사 : 2016.07.26
  • 발행 : 2016.08.10
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, it is presented that a new developed approach for equivalent area-distributed loading (EADL) induced from a single concentrated force. For the purpose, a full scale 3D steel formwork system was constructed in laboratory conditions. A developed load transmission platform was put on the formwork system and loaded step by step on the mass center. After each load increment, displacement was measured in several crictical points of the system. The developed platform which was put in to slab of formwork to equivalently distribute the load from a point to the whole slab was constituted using I profiles. A 3D finite element model of the formwork system was analyzed to compare numerical displacement results with experimental ones. In experimental tests,difference among the displacements obtained from reference numerical model (model applied EADL) and main numerical model (model applied single load using a load cell via load transmission platform) is about %13 in avarage. Difference among the displacements obtained from experimental results and main numerical model under 30 kN single load is about %11 in avarage. The results revealed that the displacements obtained experimentally and numerically are dramatically closed to each other. It is highlighted from the study that the developed approach is reliable and useful to get EDL.

키워드

참고문헌

  1. Arslan, G., Sevuk, F. and Ekiz, İ. (2008), "Steel plate contribution to load-carrying capacity of retrofitted RC beams", Construct. Build. Mater., 22(3), 143-153. https://doi.org/10.1016/j.conbuildmat.2006.10.009
  2. Bailey, C.G. and Toh, W.S. (2007), "Small-scale concrete slab tests at ambient and elevated temperatures", Eng. Struct., 29(10), 2775-2791. https://doi.org/10.1016/j.engstruct.2007.01.023
  3. Camata, G., Spacone, E. and Zarniz, R. (2007), "Experimental and nonlinear finite element studies of rc beams strengthened with frp plates", Compos.: Part B, 38(2), 277-288. https://doi.org/10.1016/j.compositesb.2005.12.003
  4. Cashell, K.A., Elghazouli, A.Y. and Izzuddin, B.A. (2011a), "Failure assessment of lightly reinforced floor slabs-i: experimental investigation", J. Struct. Eng., 137(9), 977-988. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000420
  5. Cashell, K.A., Elghazouli, A.Y. and Izzuddin, B.A. (2011b), "Failure assessment of lightly reinforced floor slabs-i: analytical studies", J. Struct. Eng., 137(9), 989-1001. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000445
  6. Ellouze, A., Ouezdou, M.B. and Karray, M.A. (2010), "Experimental study of steel fiber concrete slabs part i: behavior under uniformly distributed loads", Int. J. Concrete Struct. Mater., 4(2), 113-118. https://doi.org/10.4334/IJCSM.2010.4.2.113
  7. Foster, S.J., Bailey, C.G., Burgess, I.W. and Plank, R.J. (2004), "Experimental behaviour of concrete floor slabs at large displacements", Eng. Struct., 26(9), 1231-1247. https://doi.org/10.1016/j.engstruct.2004.04.002
  8. Grundy, P. and Kabaila, A. (2004), "Construction loads on slabs with shored formwork in multi-story buildings", Concrete Int., 26(7), 99-112.
  9. Ke, S.T., Wang, T.G., Ge, Y.J. and Tamura, Y. (2014), "Wind-induced responses and equivalent static wind loads of tower-blade coupled large wind turbine system", Struct. Eng. Mech., Int. J., 52(3), 485-505. https://doi.org/10.12989/sem.2014.52.3.485
  10. Lois, M.A., Jarallah, H.K. and Hameed, B.M. (2013), "Load-deflection behavior of reinforced concrete beams strengthened with CFRP sheets", J. Eng. Develop., 17(4), 14-26.
  11. Manos, G.C. and Katakalos, K.V. (2013), "The Use of Fiber Reinforced Plastic for the Repair and Strengthening of Existing Reinforced Concrete Structural Elements Damaged by Earthquakes", Chapter 3: Fiber Reinforced Polymers-The Technology Applied for Concrete Repair, Open Access Book, (Edited by Martin Alberto Masuelli), 240 p. DOI: http://dx.doi.org/10.5772/51326
  12. Ng, Y.H., Shanmugam, N.E. and Liew, J.Y.R. (2012), "Experimental studies on composite haunch beams", J. Construct. Steel Res., 75, 160-168. https://doi.org/10.1016/j.jcsr.2012.03.016
  13. Ozcan, D.M., Bayraktar, A., Sahin, A., Haktanir, T. and Turker, T. (2009), "Experimental and finite element analysis on the steel fiber-reinforced concrete (sfrc) beams ultimate behavior", Construct. Build. Mater., 23(2), 1064-1077. https://doi.org/10.1016/j.conbuildmat.2008.05.010
  14. Saito, H., Imamura, A., Takeuchi, M., Kasai, Y., Okamoto, S. and Yoshimura, M. (1992), "Loading tests and analyses of various types of reinforced concrete slabs under different deformation speeds", Proceedings of the 10th World Conference on Earthquake Engineering, Rotterdam, Netherlands, July, pp. 3117-3120.
  15. Santos, A., Ferreira, M.A., Carvalho, R.C. and Pinheiro, L.M. (2013), "Determination of reinforcing bars for tests of hollow core slabs with continuity", IBRACON Struct. Mater. J., 6(6), 903-932.
  16. SAP 2000 (2015), Integrated Finite Element Analysis and Design of Structures, Computers and Structures Inc., Berkeley, CA, USA.
  17. Scanlon, A. and Suprenant, B.A. (2011), "Spreadsheet for estimating two-way slab deflections including construction load effects", Concrete International, American Concrete Institute, 33(7), 29-34.
  18. Ye, S.D. and Teng, S. (2002), "An experimental study of interior clab-column connections with non-uniform slab thickness under vertical loads", Proceedings of the 27th Conference on Our World in Concrete & Structures, Singapore, August, pp. 605-610.
  19. Yilmaz, O. and Sahin, A. (2015), "A novel approach for static analysis of plane frame systems", Sigma J. Eng. Natural Sci., 33(2), 129-143.
  20. Zhang, D. and Dong, Y. (2012), "Theoretical model for limit load-carrying capacity of one-way concrete slabs at large displacements", Advances in Information Sciences and Service Sciences (AISS), 4(10), 235-243.

피인용 문헌

  1. Blasting Response of a Two-Storey RC Building Under Different Charge Weight of TNT Explosives vol.44, pp.2, 2016, https://doi.org/10.1007/s40996-019-00256-0