DOI QR코드

DOI QR Code

Prestressed concrete bridges with corrugated steel webs: Nonlinear analysis and experimental investigation

  • Chen, Xia-chun (Department of Civil Engineering, The University of Hong Kong) ;
  • Bai, Zhi-zhou (Department of Civil Engineering, The University of Hong Kong) ;
  • Zeng, Yu (Department of Civil Engineering, The University of Hong Kong) ;
  • Jiang, Rui-juan (Department of Civil Engineering, The University of Hong Kong) ;
  • Au, Francis T.K. (Department of Civil Engineering, The University of Hong Kong)
  • Received : 2015.10.26
  • Accepted : 2016.07.22
  • Published : 2016.08.10

Abstract

Concrete bridges with corrugated steel webs and prestressed by both internal and external tendons have emerged as one of the promising bridge forms. In view of the different behaviour of components and the large shear deformation of webs with negligible flexural stiffness, the assumption that plane sections remain plane may no longer be valid, and therefore the classical Euler-Bernoulli and Timoshenko beam models may not be applicable. In the design of this type of bridges, both the ultimate load and ductility should be examined, which requires the estimation of full-range behaviour. An analytical sandwich beam model and its corresponding beam finite element model for geometric and material nonlinear analysis are developed for this type of bridges considering the diaphragm effects. Different rotations are assigned to the flanges and corrugated steel webs to describe the displacements. The model accounts for the interaction between the axial and flexural deformations of the beam, and uses the actual stress-strain curves of materials considering their stress path-dependence. With a nonlinear kinematical theory, complete description of the nonlinear interaction between the external tendons and the beam is obtained. The numerical model proposed is verified by experiments.

Keywords

Acknowledgement

Supported by : Research Grants Council (RGC)

References

  1. Attard, M.M. and Setunge, S. (1996), "The stress-strain relationship of confined and unconfined concrete", ACI Mater. J., 93(5), 432-442.
  2. Attard, M.M. and Stewart, M.G. (1998), "A two parameter stress block for high-strength concrete", ACI Struct. J., 95(3), 305-317.
  3. Au, F.T.K., Du, J.S. and Cheung, Y.K. (2005), "Service load behavior of unbonded partially prestressed concrete members", Mag. Concr. Res., 57(4), 199-209. https://doi.org/10.1680/macr.2005.57.4.199
  4. Barakat, S., Al Mansouri, A. and Altoubat, S. (2015), "Shear strength of steel beams with trapezoidal corrugated webs using regression analysis", Steel Compos. Struct., Int. J., 18(3), 757-773. https://doi.org/10.12989/scs.2015.18.3.757
  5. Bariant, J.F. and Utsunomiya, T. (2006), "Watanabe E. Elasto-plastic analysis of PC girder with corrugated steel web by an efficient beam theory", Struct. Eng. / Earthq. Eng. JSCE, 23(2), 257s-268s. https://doi.org/10.2208/jsceseee.23.257s
  6. Briassoulis, D. (1986), "Equivalent orthotropic properties of corrugated sheets", Comput. Struct., 23(2), 129-138. https://doi.org/10.1016/0045-7949(86)90207-5
  7. Carreira, D.J. and Chu, K.H. (1986), "The moment-curvature relationship of reinforced concrete members", ACI Struct. J., 83(2), 191-198.
  8. Chen, X.C., Au, F.T.K., Bai, Z.Z., Li, Z.H. and Jiang, R.J. (2015a), "Flexural ductility of reinforced and prestressed concrete sections with corrugated steel webs", Comput. Concrete, 16(4), 625-642. https://doi.org/10.12989/cac.2015.16.4.625
  9. Chen, X.C., Bai, Z.Z., Au, F.T.K. and Zeng, Y. (2015b), "An extended sandwich theory for prestressed concrete bridges with corrugated steel web(s)", Report of IABSE Conference on "Elegance in Structures", Nara, Japan, May.
  10. Cheyrezy, M. and Combault, J. (1990), "Composite bridges with corrugated steel webs-achievements and prospects", Proceedings of IABSE Symposium on Mixed Structures including New Materials, Brussels, Belgium, September.
  11. Dall'Asta, A., Ragni, L. and Zona, A. (2007), "Analytical model for geometric and material nonlinear analysis of externally prestressed beams", J. Eng. Mech., 133(1), 117-121. https://doi.org/10.1061/(ASCE)0733-9399(2007)133:1(117)
  12. Du, J.S., Au, F.T.K., Cheung, Y.K. and Kwan, A.K.H. (2008), "Ductility analysis of prestressed concrete beams with unbonded tendons", Eng. Struct., 30(1), 13-21. https://doi.org/10.1016/j.engstruct.2007.02.015
  13. Eslami, A. and Ronagh, H.R. (2014), "Effect of elaborate plastic hinge definition on the pushover analysis of reinforced concrete buildings", Struct. Des. Tall Spec. Build., 23(4), 254-271. https://doi.org/10.1002/tal.1035
  14. Guo, Z.H. and Zhang, X.Q. (1987), "Investigation of complete stress-deformation curves for concrete in tension", ACI Mater. J., 84(4), 278-285.
  15. Ho, J.C.M. and Pam, H.J. (2003), "Inelastic design of low-axially loaded high-strength reinforced concrete columns", Eng. Struct., 25(8), 1083-1096. https://doi.org/10.1016/S0141-0296(03)00050-6
  16. Johnson, R.P. and Cafolla, J. (1997), "Corrugated webs in plate girders for bridges", Proc. ICE Struct. Build., 122(2), 157-164. https://doi.org/10.1680/istbu.1997.29305
  17. Kato, H., Kawabata, A. and Nishimura, N. (2002), "Practical calculation formula on displacements and stress resultants of steel-concrete mixed girders with corrugated steel web", Proceedings of JSCE, 703, 293-300. [In Japanese]
  18. Ko, H.J., Moon, J., Shin, Y.W. and Lee, H.E. (2013), "Non-linear analyses model for composite box-girders with corrugated steel webs under torsion", Steel Compos. Struct., Int. J., 14(5), 409-429. https://doi.org/10.12989/scs.2013.14.5.409
  19. Kosa, K., Awane, S., Uchino, H. and Fujibayashi, K. (2006), "Ultimate behavior of prestressed concrete bridge with corrugated steel webs using embedded connection", Proceedings of JSCE, Division E, 62(1), 202-220. [In Japanese]
  20. Lou, T.J. and Xiang, Y.Q. (2006), "Finite element modelling of concrete beams prestressed with external tendons", Eng. Struct., 28(14), 1919-1926. https://doi.org/10.1016/j.engstruct.2006.03.020
  21. Machimdamong, C., Watanabe, E. and Ustunomiya, T. (2004), "Analysis of corrugated steel web girders by an efficient beam bending theory", Struct. Eng. / Earthq. Eng. JSCE, 21(2), 131s-142s. https://doi.org/10.2208/jsceseee.21.131s
  22. Mander, J.B., Priestley, M.J.N. and Park, R. (1984), "Seismic design of bridge piers", Research Report 84-2; Department of Civil Engineering, University of Canterbury, Christchurch, New Zealand.
  23. Mattock, A.H. (1979), "Flexural strength of prestressed concrete sections by programmable calculator", J. Prestressed Concrete Institute, 24(1), 32-54.
  24. Menegotto, M. and Pinto, P.E. (1973), "Method of analysis for cyclically loaded R.C. plane frames", IABSE Preliminary Report for Symposium on Resistance and Ultimate Deformability of Structures Acted on by Well Defined Repeated Loads, Lisbon, Portugal.
  25. Mizuguchi, K., Ashiduka, K., Yoda, T., Sato, K., Sakurada, M. and Hidaka, S. (1998), "Loading tests of Hondani Bridge", Bridge Found. Eng., 32(10), 25-34. [In Japanese]
  26. Mo, Y.L., Jeng, C.H. and Krawinkler, H. (2003), "Experimental and analytical studies of innovative prestressed concrete box-girder bridges", Mater. Struct., 36(2), 99-107. https://doi.org/10.1007/BF02479523
  27. Naaman, A.E. (1983), "An approximate nonlinear design procedure for partially prestressed concrete beams", Comput. Struct., 17(2), 287-299. https://doi.org/10.1016/0045-7949(83)90017-2
  28. Park, R. (1988), "Ductility evaluation from laboratory and analytical testing", Proceedings of the 9th World Conference on Earthquake Engineering, VIII, Kyoto, Japan, August.
  29. Park, R. and Paulay, T. (1975), Reinforced Concrete Structures, John Wiley & Sons, Inc., New York, NY, USA.
  30. Reddy, J.N. (2004), An Introduction to Nonlinear Finite Element Analysis, Oxford, New York, USA.
  31. Research Group of Composite Structure with Corrugated Steel Web (1998), Design Manual of PC Box Girders with Corrugated Steel Webs; Tokyo, Japan. [In Japanese]
  32. Samanta, A. and Mukhopadhyay, M. (1999), "Finite element static and dynamic analysis of folded plates", Eng. Struct., 21(3), 277-287. https://doi.org/10.1016/S0141-0296(97)90172-3
  33. Taniguchi, N. and Yoda, T. (1997), "Study on a simple method for bending analysis of composite girders with corrugated steel webs", Struct. Eng. / Earthq. Eng. JSCE, 577, 107-120.
  34. Timoshenko, S.P. and Gere, J.M. (1972), Mechanics of Materials, Van Nostrand Reinhold, New York, NY, USA.
  35. Xu, D., Ni, Y.S. and Zhao, Y. (2015), "Analysis of corrugated steel web beam bridges using spatial grid modelling", Steel Compos. Struct., Int. J., 18(4), 853-871. https://doi.org/10.12989/scs.2015.18.4.853
  36. Youssf, O., ElGawady, M.A. and Mills, J.E. (2015), "Displacement and plastic hinge length of FRPconfined circular reinforced concrete columns", Eng. Struct., 101, 465-476. https://doi.org/10.1016/j.engstruct.2015.07.026
  37. Zona, A. and Ranzi, G. (2011), "Finite element models for nonlinear analysis of steel concrete composite beams with partial interaction in combined bending and shear", Finite Elem. Anal. Des., 47(2), 98-118. https://doi.org/10.1016/j.finel.2010.09.006
  38. Zona, A., Ragni, L. and Dall' Asta, A. (2008), "Finite element formulation for geometric and material nonlinear analysis of beams prestressed with external slipping tendons", Finite Elem. Anal. Des., 44(15), 910-919. https://doi.org/10.1016/j.finel.2008.06.005

Cited by

  1. Numerical analysis of steel-soil composite (SSC) culvert under static loads vol.23, pp.6, 2016, https://doi.org/10.12989/scs.2017.23.6.715
  2. Composite box girder with corrugated steel webs and trusses – A new type of bridge structure vol.166, pp.None, 2016, https://doi.org/10.1016/j.engstruct.2018.03.047
  3. Buckling response of smart plates reinforced by nanoparticles utilizing analytical method vol.35, pp.1, 2020, https://doi.org/10.12989/scs.2020.35.1.001
  4. Experimental investigation and numerical analysis of optimally designed composite beams with corrugated steel webs vol.37, pp.1, 2016, https://doi.org/10.12989/scs.2020.37.1.001
  5. Experimental and finite element study of optimal designed steel corrugated web beams vol.24, pp.9, 2021, https://doi.org/10.1177/1369433220986095
  6. Electro-thermo-mechanical stress analysis of smart sandwich cylindrical shell vol.40, pp.5, 2016, https://doi.org/10.12989/scs.2021.40.5.723
  7. Research on flexural behavior of composite box continuous girder with corrugated steel webs and trusses vol.24, pp.15, 2021, https://doi.org/10.1177/13694332211033957