Structural Engineering and Mechanics

  • 제59권5호
  • /
  • Pages.867-883
  • /
  • 2016
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Influence of steel fiber and reinforcing details on the ultimate bearing strength of the post-tensioning anchorage zone

  • Kim, Jin-Kook (Steel Structure Research Group, POSCO) ;
  • Yang, Jun-Mo (Steel Structure Research Group, POSCO) ;
  • Kwon, Yangsu (Site & Structural Engineering Group, KHNP Central Research Institute)
  • 투고 : 2016.02.15
  • 심사 : 2016.05.25
  • 발행 : 2016.09.10
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, the effects of steel-fiber and rebar reinforcements on the ultimate bearing strength of the local anchorage zone were investigated based on experiments and comparisons between test results and design-equation predictions (AASHTO 2012, NCHRP 1994). Eighteen specimens were fabricated using the same anchorage device, which is one of the conventional anchorage devices, and two transverse ribs were used to secure an additional bearing area for a compact anchorage-zone design. Eight of the specimens were reinforced with only steel fiber and are of two concrete strengths, while six were reinforced with only rebars for two concrete strengths. The other four specimens were reinforced with both rebars and steel fiber for one concrete strength. The test and the comparisons between the design-equation predictions and the test results showed that the ultimate bearing strength and the section efficiency are highly affected by the reinforcement details and the concrete strength; moreover, the NCHRP equation can be conservatively applied to various local anchorage zones for the prediction of the ultimate bearing strength, whereby conditions such as the consideration of the rib area and the calibration factor are changed.

키워드

과제정보

연구 과제 주관 기관 : Korea Agency for Infrastructure Technology Advancement (KAIA)

참고문헌

  1. AASHTO (American Association of State Highway and Transportation Officials) (2002), Specifications for Highway Bridges, 17th Edition, AASHTO, Washington D.C., USA.
  2. AASHTO (American Association of State Highway and Transportation Officials) (2010), AASHTO LRFD Bridge Design Specifications, AASHTO, Washington D.C., USA.
  3. ACI 318-14 (2014), Building code requirements for structural concrete and commentary, American Concrete Institute; Farmington Hills, MI, USA.
  4. ASTM C1609/C1609M-12 (2012), Standard test method for flexural performance of fiber-reinforced concrete (using beam with third-point loading), ASTM International Standard Worldwide, West Conshohocken, PA.
  5. Breen, J.E. (1994), "Anchorage zone reinforcement for post-tensioned concrete girder", NCHRP Report 356, Transportation Research Board, Washington D.C., USA.
  6. Cervenka, V. and Ganz, H.R. (2014), "Validation of post-tensioning anchorage zones by laboratory testing and numerical simulation", Struct. Concrete, 15(2), 258-268. https://doi.org/10.1002/suco.201300038
  7. EOTA (European Organisation for Technical Approvals) (2002), ETAG 013: Guideline for European technical approval of post-tensioning kits for prestressing of structures, EOTA, Brussels, Belgium.
  8. Guyon, Y. (1953), Prestressed Concrete, Wiley, NJ, USA.
  9. Kim, J.K., Seong, T.R., Jang, K.P. and Kwon, S.H. (2013), "Tensile behavior of new 2,200 MPa and 2,400 MPa strands according to various types of mono anchorage", Struct. Eng. Mech., 47(3), 383-399. https://doi.org/10.12989/sem.2013.47.3.383
  10. KS D 3504 (2011), Steel bars for concrete reinforcement, Korean Standards Association, Seoul, Korea.
  11. KS D 7002 (2011), Uncoated stress-relieved steel wires and strands for prestressed concrete, Korean Standards Association, Seoul, Korea.
  12. Morgan, D.R., Mindess, S. and Chen, L. (1995), "Testing and specifying toughness for fiber reinforced concrete and shotcrete", Proceedings of 2nd University - Industry Workshop on Fiber-Reinforced Concrete and Other Advanced Composites, Fiber-Reinforced Concrete - Modern Developments, Toronto.
  13. PTI (Post-Tensioning Institute) (2006), Post-Tensioning Manual, 6th Edition, PTI.
  14. Richart, F.E., Brandtzaeg, A. and Brown, R.L. (1928), "A study of the failure of concrete under combined compressive stresses", Research Bulletin No. 185; Univ. of Illinois Engineering Experimental Station, USA.
  15. Roberts-Wollmann, C.L. (2000), "Design and test specifications for local tendon anchorage zones", ACI Struct. J., 97(6), 867-875.
  16. Roberts, C.L. (1990), "Behavior and design of the local anchorage zone of post-tensioned concrete members", Master's Thesis, University of Texas at Austin, USA.
  17. Sanders, D.H. (1990), "Design and behavior of anchorage zones in post-tensioned concrete members", Doctoral dissertation, University of Texas at Austin, USA.

피인용 문헌

  1. Load Carrying and Hydrostatic Performances of Innovative Encapsulated Anchorage System for Unbonded Single Strand vol.2019, pp.None, 2016, https://doi.org/10.1155/2019/7812623
  2. Design equation to evaluate bursting forces at the end zone of post-tensioned members vol.24, pp.5, 2019, https://doi.org/10.12989/cac.2019.24.5.423
  3. Analysis of Bearing Strength of Post-Tensioning Anchorage Zone with Respect to Relative Bearing Area and Lateral Confinement Design vol.11, pp.18, 2021, https://doi.org/10.3390/app11188386