전기학회논문지 (The Transactions of The Korean Institute of Electrical Engineers)

  • 제65권8호
  • /
  • Pages.1340-1346
  • /
  • 2016
  • /
  • 1975-8359(pISSN)
  • /
  • 2287-4364(eISSN)
대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지
DOI QR코드

DOI QR Code

제어 가능한 전류원 기반의 인버터를 이용한 실제적 태양광 발전 시스템 모델링

Modeling of Practical Photovoltaic Generation System using Controllable Current Source based Inverter

  • Oh, Yun-Sik (Dept. of Information and Communication Engineering, Sungkyunkwan University) ;
  • Cho, Kyu-Jung (Dept. of Information and Communication Engineering, Sungkyunkwan University) ;
  • Kim, Min-Sung (Dept. of Information and Communication Engineering, Sungkyunkwan University) ;
  • Kim, Ji-Soo (Dept. of Information and Communication Engineering, Sungkyunkwan University) ;
  • Kang, Sung-Bum (Dept. of Information and Communication Engineering, Sungkyunkwan University) ;
  • Kim, Chul-Hwan (Dept. of Information and Communication Engineering, Sungkyunkwan University) ;
  • Lee, You-Jin (Korea Electric Power Research Institute) ;
  • Ko, Yun-Tae (Corning)
  • 투고 : 2016.04.29
  • 심사 : 2016.07.20
  • 발행 : 2016.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Utilization of Distributed Generations (DGs) using Renewable Energy Sources (RESs) has been constantly increasing as they provide a lot of environmental, economic merits. In spite of these merits, some problems with respect to voltage profile, protection and its coordination system due to reverse power flow could happen. In order to analyze and solve the problems, accurate modeling of DG systems should be preceded as a fundamental research task. In this paper, we present a PhotoVoltaic (PV) generation system which consists of practical PV cells with series and parallel resistor and an inverter for interconnection with a main distribution system. The inverter is based on controllable current source which is capable of controlling power factors, active and reactive powers within a certain limit related to amount of PV generation. To verify performance of the model, a distribution system based on actual data is modeled by using ElectroMagnetic Transient Program (EMTP) software. Computer simulations according to various conditions are also performed and it is shown from simulation results that the model presented is very effective to study DG-related researches.

키워드

참고문헌

  1. A National Code of Practice for Embedded Generation-Consultation Paper, PB Associates, Derbyshire, U.K., Feb. 2006.
  2. A. D. T. Le, K. M. Muttaqi, M. Negnevitsky, and G. Ledwich, "Applying protection principles for controlling distributed generation," Australian J. Elect. Electron. Eng., vol. 4, no. 3, pp. 249-254, 2008. https://doi.org/10.1080/1448837X.2008.11464191
  3. N. D. Hatziargyriou and A. P. S. Meliopoulos, "Distributed energy sources: Technical challenges," in Proc. IEEE Power Eng. Soc. Winter Meeting 2002, 2002, vol. 2, pp. 1017-1022.
  4. J. A. P. Lopes, "Integration of dispersed generation on distribution network-impact studies," in Proc. IEEE Power Eng. Soc. Winter Meeting 2002, 2002, vol. 1, pp. 323-328.
  5. H. S. Rauschenbach, Solar Cell Array Design Handbook. New York: Van Nostrand Reinhold, 1980
  6. M. G. Villalva, J. R. Gazoli, E. R. Filho, "Comprehensive Approach to Modeling and Simulation of Photovoltaic Arrays", IEEE Transactions on Power Electronics, vol. 24, no. 5, May 2009.
  7. E. Muljadi, M. Singh, V. Gevorgian, "User Guide for PV Dynamic Model Simulation Written on PSCAD Platform", National Renewable Energy Laboratory Technical Report TP-5D00-62053, Nov 2014.