Computers and Concrete

  • 제18권2호
  • /
  • Pages.279-295
  • /
  • 2016
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Development of fine grained concretes for textile reinforced cementitious composites

  • Daskiran, Esma Gizem (Department of Civil Engineering, Istanbul Technical University) ;
  • Daskiran, Mehmet M. (Department of Civil Engineering, Istanbul Technical University) ;
  • Gencoglu, Mustafa (Department of Civil Engineering, Istanbul Technical University)
  • 투고 : 2016.03.07
  • 심사 : 2016.04.19
  • 발행 : 2016.08.25
⟨ 이전 논문 다음 논문 ⟩

초록

A new innovative composite material is textile reinforced cementitious composite (TRCC). To achieve high flexural performance researchers suggest polymer modification of TRCC matrices. In this study, nine ready mix repair mortars commonly used in construction industry and the production of TRCC elements were examined. Mechanical properties such as compressive and flexural strength, drying shrinkage were studied. Being a significant durability concern, alkali silica reaction tests were performed according to related standards. Results showed that, some ready repair mortar mixes are potentially reactive due to the alkali silica reaction. Two of the ready mortar mixes labelled as non-shrinkage in their technical data sheets showed the highest shrinkage. In this experiment, researchers designed new matrices. These matrices were fine grained concretes modified with polymer additives; latexes and redispersible powders. Two latexes and six redispersible powder polymers were used in the study. Mechanical properties of fine grained concretes such as compressive and flexural strengths were determined. Results showed that some of the fine grained concretes cast with redispersible powders had higher flexural strength than ready mix repair mortars at 28 days. Matrix composition has to be designed for a suitable consistency for planned production processes of TRCC and mechanical properties for load-carrying capacity.

키워드

참고문헌

  1. Aydin, E.G. and Yildirim, H. (2012), "The effect of mineral admixtures and micronized calcite on alkali silica reaction expansions in the usage of aggregates from different origin", Int. J. Phys. Sci., 7(45), 5996-6011.
  2. Brameshuber, W., Brockmann, T., Hegger, J. and Molter, M. (2002), "Investigations on textile reinforced concrete", Beton, 52(9), 424-426.
  3. Carozzi, F.G., Milani, G. and Poggi, C. (2014), "Mechanical properties and numerical modeling of Fabric Reinforced Cementitious Matrix (FRCM) systems for strengthening of masonry structures", Compos. Struct., 107, 711-725. https://doi.org/10.1016/j.compstruct.2013.08.026
  4. Felekoglu, B. (2009), "High performance micro concrete design", Ph.D. Thesis.
  5. Hong Kong Housing Department (1987), Manual of structural maintenance, Hong Kong.
  6. Larbi, A.S., Agbossou, A. and Hamelin, P. (2013), "Experimental and numerical investigations about textile-reinforced concrete and hybrid solutions for repairing and/or strengthening reinforced concrete beams", Compos. Struct., 99, 152-162. https://doi.org/10.1016/j.compstruct.2012.12.005
  7. Mobasher, B. (2011), Mechanics of fiber and textile reinforced cement composites, CRC Press Tailor and Francis Group.
  8. Ohama, Y. (1995), "Handbook of polymer-modified concrete and mortars", Noyes Publication.
  9. Peled, A. and Mobasher, B. (2005), "Pultruded fabric-cement composites", ACI Mater. J.-American Concrete Inst., 102(1), 15-23.
  10. Pivacek, A., Haupt, G.J. and Mobasher, B. (1997), "Cement based cross-ply laminates", Adv. Cement Mater., 6(3), 144-152. https://doi.org/10.1016/S1065-7355(97)90022-5
  11. Poston, R.W., Kesner, K.E. and Emmons, P.H. (1998), "Performance criteria for selection of concrete repair materials", Phase II- Laboratory Results, Technical Report REMR-CS-57, U.S. Army Corps of Engineers, Waterways Experiment Station, Vicksburg, USA.
  12. Soranakom, C. and Mobasher, B. (2009), "Flexural analysis and design of textile reinforced concrete", Proceedings of the 4th Colloquium on Textile Reinforced Structures (CTRS4), 3-5, 273-288, June, Germany.
  13. Touma, W.E. et al. (2000), "Alkali-silica reaction in Portland cement concrete: Testing procedures and mitigation methods", Proceedings of 11th International Conference on Alkali-Aggregate Reaction (ICAAR), 513-522.
  14. Walk-Lauffer, B., Orlowsky, J. and Raupach, M. (2003), "Increase of bond properties within the roving in textile reinforced concrete", Proceedings of the 15th Internationale Baustofftagung, 2, 0281-0290.

피인용 문헌

  1. Effect of polymer addition on air void content of fine grained concretes used in TRCC vol.20, pp.2, 2017, https://doi.org/10.12989/cac.2017.20.2.165
  2. Investigating loading rate and fibre densities influence on SRG - concrete bond behaviour vol.34, pp.6, 2020, https://doi.org/10.12989/scs.2020.34.6.877
  3. Seismic performance of PVA textile cementitious composites used as permanent formwork in full-scale circular RC columns vol.36, pp.None, 2022, https://doi.org/10.1016/j.istruc.2021.12.006