DOI QR코드

DOI QR Code

An artificial neural network residual kriging based surrogate model for curvilinearly stiffened panel optimization

  • Sunny, Mohammed R. (Department of Aerospace Engineering, Indian Institute of Technology) ;
  • Mulani, Sameer B. (Department of Aerospace Engineering and Mechanics, The University of Alabama) ;
  • Sanyal, Subrata (Measurement Science and Engineering Department, Naval Surface Warfare Center (NSWC)) ;
  • Kapania, Rakesh K. (Department of Aerospace and Ocean Engineering, Virginia Polytechnic Institute and State University)
  • Received : 2016.01.01
  • Accepted : 2016.06.07
  • Published : 2016.07.25

Abstract

We have performed a design optimization of a stiffened panel with curvilinear stiffeners using an artificial neural network (ANN) residual kriging based surrogate modeling approach. The ANN residual kriging based surrogate modeling involves two steps. In the first step, we approximate the objective function using ANN. In the next step we use kriging to model the residue. We optimize the panel in an iterative way. Each iteration involves two steps-shape optimization and size optimization. For both shape and size optimization, we use ANN residual kriging based surrogate model. At each optimization step, we do an initial sampling and fit an ANN residual kriging model for the objective function. Then we keep updating this surrogate model using an adaptive sampling algorithm until the minimum value of the objective function converges. The comparison of the design obtained using our optimization scheme with that obtained using a traditional genetic algorithm (GA) based optimization scheme shows satisfactory agreement. However, with this surrogate model based approach we reach optimum design with less computation effort as compared to the GA based approach which does not use any surrogate model.

Keywords

References

  1. Ahmed, M.Y.M. and Qin, N. (2009), "Surrogate-based aerodynamic design optimization: Use of Surrogates in Aerodynamic Design Optimization", 13th International Conference on Aerspace Sciences & Aviation Technology, ASAT-13-AE-14, 1-26.
  2. Balabanov, V.O., Giunta, A.A., Golovidov, O., Grossman, B., Mason, W.H., Watson, L.T. and Haftka, R.T. (1999), "Reasonable design space approach to response surface approximation", J. Aircraft, 36(1), 308-315. https://doi.org/10.2514/2.2438
  3. Booker, A.J., Dennis, J.E., Frank, P.D., Serafini, D. and Torczon, V. (1998), "Optimization using surrogate objectives on a helicopter test example", Comput. Meth. Optim. Des. Control, Boston: Birkhauser, 49-58.
  4. Box, G.E.P. and Wilson, K.B. (1951), "On the experimental attainment of optimum conditions", J. Roy. Statist. Soc., Series B, 13(1), 1-35.
  5. Daberkow, D.D. and Mavris, D.N. (1998), "New approaches to conceptual and preliminary aircraft design: a comparative assessment of a neural network formulation and a response surface methodology", 1998 World Aviation Conference, Anaheim, CA.
  6. Demyanov, V., Kanevsky, M., Chernov, S., Savelieva, E. and Timonin, V. (1998), "Neural network residual kriging application for climatic data", J. Geographic Inform. Decision Anal., 2(2), 215-232.
  7. Efron, B. (1983), "Estimating the error rate of a prediction rule: improvement on cross-validation", J. Am. Statist. Assoc., 78(382), 316-331. https://doi.org/10.1080/01621459.1983.10477973
  8. Forrester, A.I.J. and Keane, A.J. (2009), "Recent advances in surrogate based optimization", Prog. Aero. Sci., 45(1), 50-79. https://doi.org/10.1016/j.paerosci.2008.11.001
  9. Giunta, A.A. (1997), "Aircraft multidisciplinary design optimization using design of experiments theory and response surface modeling methods", Ph.D. Dissertation, Faculty of Virginia Polytechnic Inst. And State Univ., Blacksburg, VA.
  10. Hagan, M.T., Demuth, H.B. and Beale, M. (1996), Neural network design, PWS Publishing Company.
  11. Hebb, D.O. (2002), Organization of behavior: a neuropsychological theory, L. Erlbaum Associates.
  12. Hedayat, A., Sloane, N. and Stufken, J. (1999), Orthogonal arrays: theory and applications, Springer, Series in Statistics, Berlin.
  13. Jones, D.R. (2001), "A taxonomy of global optimization methods based on response surface", J. Global Optimiz., 21(4), 345-383. https://doi.org/10.1023/A:1012771025575
  14. Jones, D. and Schonlau, M. (1998), "Expensive global optimization of expensive black-box functions", J. Global Optimiz., 13, 455-492. https://doi.org/10.1023/A:1008306431147
  15. Keane, A.J. (2004), "Design search and optimization using radial basis functions with regression capabilities", ParmeeIC Berlin, 39-49.
  16. Kim, Y.Y. and Kapania, R.K. (2003), "Neural networks for inverse problems in damage identification and optical imaging", AIAA J., 41(4), 732-740. https://doi.org/10.2514/2.2004
  17. Kiranyaz, S., Ince, T., Yildirim, A. and Gabbouj, M. (2009), "Evolutionary artificial neural networks by multi dimensional particle swarm optimization", Neural Networks, 22(10), 1448-1462. https://doi.org/10.1016/j.neunet.2009.05.013
  18. Leary, S., Bhaskar, A. and Keane, A. (2003), "Optimal orthogonal array based latin hypercubes", J. Appl. Statist., 30(5), 585-598. https://doi.org/10.1080/0266476032000053691
  19. Matheron, G. (1963), "Principles of geostatics", Economic Geol., 58(8), 1246-1266. https://doi.org/10.2113/gsecongeo.58.8.1246
  20. McKay, M., Conover, W. and Beckman, R. (1979), "A comparison of three methods for selecting values of input variables in the analysis of output from a computer code", Technometrics, 42(1), 239-245.
  21. Michler, A. and Heinrich, R. (2012), "Surrogate-enhanced simulation of aircraft in trimmed state", Comput. Meth. Appl. Mech. Eng., 217-220, 96-110. https://doi.org/10.1016/j.cma.2012.01.010
  22. Mulani, S.B., Slemp, W.C.H. and Kapania, R.K. (2010), "Curvilinear stiffened panel optimization framework for multiple load cases", 13th AIAA/ISSMO Multidisciplinary Analysis Optimization Conference, Fort Worth, Texas.
  23. Mulani, S.B., Slemp, W.C.H. and Kapania, R.K. (2012), "EBF3PanelOpt: An overview and recent developments of an optimization framework for stiffened panel using curvilinear stiffeners", AeroMat 2012 Conference and Exposition, Charlotte, NC.
  24. Mulani, S.B., Slemp, W.C.H. and Kapania, R.K. (2013), "EBF3PanelOpt: An optimization framework for curvilinear blade-stiffened panels", Thin-Wall. Struct., 63, 13-26.
  25. Myers, R.H. and Montgomery, D.C. (1995), Response surface methodology-process and product optimization using designed experiment, New York: Wiley.
  26. Niu, M.C.Y. (2005), Airframe stress analysis and sizing, Technical Book Company.
  27. Palmer, K. and Tsui, K. (2001), "A minimum bias latin hypercube design", IIE Trans, 33(9), 793-808. https://doi.org/10.1080/07408170108936873
  28. Queipo, N.V., Haftka, R.T., Shyy, W., Goel, T., Vidyanathan, R. and Tucker, P.K. (2005), "Surrogate based analysis and optimization", Prog. Aero. Sci., 41(1), 1-28. https://doi.org/10.1016/j.paerosci.2005.02.001
  29. Rossenbrock, H.H. (1960), "An automatic method for finding the greatest or least value of a function", Comput. J., 3(3), 173-184.
  30. Sacks, J., Schiller, S. and Welch, W. (1989), "Designs for computer experiments", Technometrics, 31(1), 41-47. https://doi.org/10.1080/00401706.1989.10488474
  31. Sacks, J., Welch W., Mitchell T. and Wynn H. (1993), "Design and analysis of computer experiments", Statistic. Sci., 4, 409-423.
  32. Shen, Z.Q., Shi, J.B., Wang, K., Kong, F.S. and Bailey, J.S. (2004), "Neural network ensemble residual kriging application for spatial variability of soil properties", Podesphere, 14(3), 289-296.
  33. Sunny, M.R. and Kapania, R.K. (2013), "Damage detection in a prestressed membrane using a waveletbased neurofuzzy system", AIAA J., 51(11), 2558-2569. https://doi.org/10.2514/1.J052084
  34. Toal, D.J. and Keane, A.J. (2011), "Efficient multipoint aerodynamic design optimization via cokriging", J. Aircraft, 48(5), 1685-1695. https://doi.org/10.2514/1.C031342
  35. Vavalle, A. and Qin, N. (2007), "Iterative response surface based optimization scheme for transonic airfoil design", J. Aircraft, 44(2), 365-376. https://doi.org/10.2514/1.19688
  36. Venter, G., Haftka, R.T. and Starnes, J.H. (1998), "Construction of response surface approximations for design optimization", AIAA J., 36(12), 2242-2249. https://doi.org/10.2514/2.333
  37. Wang, H., Li, E., Li, G.Y. and Zhong, Z.H. (2008), "Development of metamodeling based optimization system for high nonlinear engineering problems", Adv. Eng. Softw., 39(8), 629-645. https://doi.org/10.1016/j.advengsoft.2007.10.001
  38. Welch, S.M., Roe, J.L. and Dong, Z. (2003), "A genetic neural network model of flowering time control in arabidopsis thaliana", Agronomy J., 95(1), 71-81. https://doi.org/10.2134/agronj2003.0071
  39. Ye, K. (1998), "Orthogonal column latin hypercubes and their application in computer experiments", J. Am. Statist. Assoc., 93(444), 1430-1439. https://doi.org/10.1080/01621459.1998.10473803
  40. Zaabab, A.H., Zhang, Q-L. and Nakhla, M. (1995), "A neural modeling approach to circuit optimization and statistical design", IEEE Transactions on Microwave Theory and Techniques, 43, 1349-1358. https://doi.org/10.1109/22.390193

Cited by

  1. Accurate modelling of lossy SIW resonators using a neural network residual kriging approach vol.14, pp.6, 2017, https://doi.org/10.1587/elex.14.20170073
  2. Spatial interpolation of SPT data and prediction of consolidation of clay by ANN method vol.8, pp.6, 2016, https://doi.org/10.12989/csm.2019.8.6.523
  3. Prediction of UCS and STS of Kaolin clay stabilized with supplementary cementitious material using ANN and MLR vol.5, pp.2, 2016, https://doi.org/10.12989/acd.2020.5.2.195
  4. Improving geometric construction of high resolution SAR images using Kriging-based surrogate modelling in mountainous terrain of Malaysia vol.42, pp.22, 2016, https://doi.org/10.1080/01431161.2021.1982154