참고문헌
- Achmus, M., Akdag, C. T., and Thieken, K. (2013), "Load-Bearing Behavior of Suction Bucket Foundations in Sand", Applied Ocean Research, Vol.43, pp.157-165. https://doi.org/10.1016/j.apor.2013.09.001
- Achmus, M., Kuo, Y. S., and Abdel-Rahman, K. (2009), "Behavior of Monopile Foundations under Cyclic Lateral Load", Computers and Geotechnics, Vol.36, No.5, pp.725-735. https://doi.org/10.1016/j.compgeo.2008.12.003
- Bransby, M. F. and Randolph, M. F. (1997), "Shallow Foundations Subject to Combined Loadings", 9th International Conference of the International Association for Computer Methods and Advances in Geomec, 3, pp.1947-1952.
- Brinkgreve, R. B. J. and Vermeer, P. A. (1999), Plaxis: Finite Element Code for Soil and Rock Analyses: Version 7, Balkema.
- Brocklehurst, C. J. (1993), Finite Element Studies of Reinforced and Unreinforced Two-Layer Soil Systems, University of Oxford.
- Burd, H. and Frydman, S. (1997), "Bearing Capacity of Plane-Strain Footings on Layered Soils", Canadian Geotechnical Journal, Vol. 34, No.2, pp.241-253. https://doi.org/10.1139/t96-106
- Gourvenec, S. and Randolph, M. (2003), "Effect of Strength Non-Homogeneity on the Shape of Failure Envelopes for Combined Loading of Strip and Circular Foundations on Clay", Geotechnique, Vol.53, No.6, pp.575-586. https://doi.org/10.1680/geot.2003.53.6.575
- Hanna, A. and Meyerhof, G. (1980), "Design Charts for Ultimate Bearing Capacity of Foundations on Sand Overlying Soft Clay", Canadian Geotechnical Journal, Vol.17, No.2, pp.300-303. https://doi.org/10.1139/t80-030
- Itasca (2011), Flac, Fast Lagrangian Analysis of Continua, Minneapolis.
-
Kim, D., Youn, J., Jee, S., Choi, J., Lee, J., and Kim, D. (2014), "Numerical Studies on Bearing Capacity Factor
$N{\gamma}$ and Shape Factor of Strip and Circular Footings in Sand According to Dilatancy Angle", Journal of the Korean geotechnical Society, Vol.30, No.1, pp.49-63 (in Korean). https://doi.org/10.7843/kgs.2014.30.1.49 - Lee, J. and Salgado, R. (2005), "Estimation of Bearing Capacity of Circular Footings on Sands Based on Cone Penetration Test", Journal of Geotechnical and Geoenvironmental Engineering, Vol. 131, No.4, pp.442-452. https://doi.org/10.1061/(ASCE)1090-0241(2005)131:4(442)
- Lee, K., Cassidy, M., and Randolph, M. (2013a), "Bearing Capacity on Sand Overlying Clay Soils: Experimental and Finite-Element Investigation of Potential Punch-through Failure", Geotechnique, Vol.63, No.15, pp.1271. https://doi.org/10.1680/geot.12.P.175
- Lee, K., Randolph, M., and Cassidy, M. (2013b), "Bearing Capacity on Sand Overlying Clay Soils: A Simplified Conceptual Model", Geotechnique, Vol.63, No.15, pp.1285. https://doi.org/10.1680/geot.12.P.176
- Loukidis, D. and Salgado, R. (2009), "Bearing Capacity of Strip and Circular Footings in Sand Using Finite Elements", Computers and Geotechnics, Vol.36, No.5, pp.871-879. https://doi.org/10.1016/j.compgeo.2009.01.012
- Meyerhof, G. (1974), "Ultimate Bearing Capacity of Footings on Sand Layer Overlying Clay", Canadian Geotechnical Journal, Vol.11, No.2, pp.223-229. https://doi.org/10.1139/t74-018
- Meyerhof, G. and Hanna, A. (1978), "Ultimate Bearing Capacity of Foundations on Layered Soils under Inclined Load", Canadian Geotechnical Journal, Vol.15, No.4, pp.565-572. https://doi.org/10.1139/t78-060
- Michalowski, R. L. and Shi, L. (1995), "Bearing Capacity of Footings over Two-Layer Foundation Soils", Journal of Geotechnical Engineering, Vol.121, No.5, pp.421-428. https://doi.org/10.1061/(ASCE)0733-9410(1995)121:5(421)
- Milligan, G., Jewell, R., Houlsby, G., and Burd, H. (1989), "A New Approach to the Design of Unpaved Roads-Part I", Ground Engineering, Vol.22, No.3, pp.25-29.
- Osborne, J., Houlsby, G., Teh, K., Bienen, B., Cassidy, M., Randolph, M., and Leung, C. (2009), "Improved Guidelines for the Prediction of Geotechnical Performance of Spudcan Foundations During Installation and Removal of Jack-up Units", Proceedings of the 41st offshore technology conference, Houston, OTC-20291.
- Osborne, J. and Paisley, J. (2002), "S E Asia Jack-up Punch-Throughs: The Way Forward?", Proceedings of the international conference on offshore site investigation and geotechnics - sustainability and diversity, UK: Society of Underwater Technology, pp.301-306.
- Osborne, J., Pelley, D., Nelson, C., and Hunt, R. (2006), "Unpredicted Jack-up Foundation Performance", Proceedings of the 1st Jack-up Asia Conference, Singapore.
- Park, J., Park, D., and Yoo, J. (2016), "Vertical Bearing Capacity of Bucket Foundations in Sand", Ocean Engineering, Vol. submitted.
- Park, J. S., Park, D., Jee, S. H., and Kim, D. J. (2015a), "Evaluation of Vertical Bearing Capacity of Bucket and Shallow Foundations Installed in Sand", Journal of the Korean Geo-Environmental Society, Vol.16, No.9, pp.33-41.
- Park, J. S., Park, D., Yoon, S. W., and Jang, H. S. (2015b), "Vertical Load Transfer Mechanism of Bucket Foundation in Sand", Journal of the Korean geotechnical Society, Vol.31, No.7, pp.1-11.
- Potts, D. M., Zdravkovic, L., and Zdravkovic, L. (2001), Finite Element Analysis in Geotechnical Engineering: Application, Thomas Telford.
- Shiau, J., Lyamin, A., and Sloan, S. (2003), "Bearing Capacity of a Sand Layer on Clay by Finite Element Limit Analysis", Canadian Geotechnical Journal, Vol.40, No.5, pp.900-915. https://doi.org/10.1139/t03-042
- Simulia (2010), Abaqus User's Manual, Dassault Systemes Simulia Corp.