DOI QR코드

DOI QR Code

Influence of Physical Load on the Stability of Organic Solar Cells with Polymer : Fullerene Bulk Heterojunction Nanolayers

  • Lee, Sooyong (Orgnic Nanoelectronics Laboratory, Department of Chemical Engineering, School of Applied Chemical Engineering, Kyungpook National University) ;
  • Kim, Hwajeong (Orgnic Nanoelectronics Laboratory, Department of Chemical Engineering, School of Applied Chemical Engineering, Kyungpook National University) ;
  • Kim, Youngkyoo (Orgnic Nanoelectronics Laboratory, Department of Chemical Engineering, School of Applied Chemical Engineering, Kyungpook National University)
  • Received : 2016.05.24
  • Accepted : 2016.05.31
  • Published : 2016.06.30

Abstract

We report the effect of physical load on the stability of organic solar cells under physical loads. The active layers in organic solar cells were fabricated with bulk heterojunction films (BHJ) films of poly (3-hexylthiophene) and phenyl-$C_{61}$-butyric methyl ester. The loading time was varied up to 60 s by keeping the physical load constant. Results showed that the open circuit voltage was not influenced by the physical load but other solar cell parameters were sensitive to the loading time. The fill factor was very slightly increased at 15 s, while short circuit current density was well kept for 30 s. The power conversion efficiency was reasonably maintained for 45 s but became significantly decreased by the continuous loading for 60 s.

Keywords

References

  1. Scharber, M. C., Sariciftci, N. C., "Efficiency of bulk-heterojunction organic solar cells", Prog. Polym. Sci., Vo1. 38, No. 12, pp. 1929-1940, 2013. https://doi.org/10.1016/j.progpolymsci.2013.05.001
  2. Huang, X., Han, S., Huang, W., Liu, X., "Enhancing solar cell efficiency: the search for luminescent materials as spectral converters", Chem. Soc. Rev., Vol. 42, pp. 173-201, 2013. https://doi.org/10.1039/C2CS35288E
  3. Kim, H., Nam, S., Jeong, J., Lee, S., Seo, J. Han, H., Kim, Y., "Organic solar cells based on conjugated polymers : history and recent advances", Korean J. Chem. Eng., Vol. 31, No. 7, pp. 1095-1104, 2014. https://doi.org/10.1007/s11814-014-0154-8
  4. Franeker, J. J. V., Turbiez, M., Li, W., Wienk, M. M., Janssen, R. A. J., "A real-time study of the benefits of co-solvents in polymer solar cell processing", Nat. Commun., Vol. 6, pp. 6229, 2015. https://doi.org/10.1038/ncomms7229
  5. Wu, J. S., Cheng, S. W., Cheng, Y. J., Hsu, C. S., "Donor-acceptor conjugated polymers based on multifused ladder type arenes for organic solar cells", Chem. Soc. Rev., Vol. 44, pp. 1113-1154, 2015. https://doi.org/10.1039/C4CS00250D
  6. Dang, M. T., Hirsch, L., Wantz, G., Wuest, J. D., "Controlling the morphology and performance of bulk heterojunctions in solar cells. Lessons learned from the benchmark poly(3-hexylthiophene): [6,6]-phenyl-C61-butyric acid methyl ester system", Chem. Rev., Vol. 113, No. 5, pp. 3734-3765, 2013. https://doi.org/10.1021/cr300005u
  7. Chen, H. Y., Hou, J., Zhang, S., Liang, Y., Yang, G., Yang, Y., Yu, L., Wu, Y., Li, G., "Polymer solar cells with enhanced open-circuit voltage and efficiency", Nat. Photonics, Vol. 3, pp. 649-653, 2009. https://doi.org/10.1038/nphoton.2009.192
  8. Deng, Y., Liu, J., Wang, J., Liu, L., Li, W., Tian, H., Zhang, X., Xie, Z., Geng, Y., Wang, F., "Dithienocarbazole and isoindigo based amorphous low bandgap conjugated polymers for efficient polymer solar cells", Adv. Mater., Vol. 26, No. 3, pp. 471-476, 2014. https://doi.org/10.1002/adma.201303586
  9. Ho, C. C., Chen, C. A., Chang, C. Y., Darling, S. B., Su, W. F., "Isoindigobased copolymers for polymer solar cells with efficiency over 7%", J. Mater. Chem. A, Vol. 2, pp. 8026-8032, 2014. https://doi.org/10.1039/C4TA01083C
  10. Guo, X. Zhou, N., Lou, S. J., Smith, J., Tice, D. B., Hennek, J. W., Ortiz, R. P., Navarrete, J. T. L., Li, K., Strzalka, J., Chen, L. X., Chang, R. P. H., Facchetti, A., Marks, T. J., "Polymer solar cells with enhanced fill factors", Nat. Photonics, Vol. 7, pp. 825-833, 2013. https://doi.org/10.1038/nphoton.2013.207
  11. He, Z., Xiao, B., Liu, F., Wu, H., Yang, Y., Xiao, S., Wang, C., Russell, T. P., Cao, Y., "Single-junction polymer solar cells with high efficiency and photovoltage", Nat. Photonics, Vol. 9, pp. 174-179, 2015. https://doi.org/10.1038/nphoton.2015.6
  12. Tao, Q., Xia, Y., Xu, X., Hedstrom, S., Backs, O., James, D. I., Persson, P. Olsson, E., Lnganas, O., Hou, W., Zhu, W., Wang, E., "D-A1-D-A2 copolymers with extended donor segments for efficient polymer solar cells", Macromolecules, Vol. 48, No. 4, pp. 1009-1016, 2015. https://doi.org/10.1021/ma502186g
  13. Zhang, S., Ye, L., Zhao, W., Liu, D., Yao, H., Hou, J., "Side chain selection for designing highly efficient photovoltaic polymers with 2D-conjugated structure", Macromolecules, Vol. 47, No. 14, pp. 4653-4659, 2014. https://doi.org/10.1021/ma500829r
  14. Shaheen, S. E., Barbec, C. J., Sariciftci, N. S., "2.5% efficient organic plastic solar cells", Appl. Phys. Lett., Vol. 78, pp. 841-843, 2001. https://doi.org/10.1063/1.1345834
  15. Li, G., Shrotriya, V., Huang, J., Yao, Y., Moriarty, T., Emery, K., Yang, Y., "High efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends", Nat. Mater., Vol. 4, pp. 864-868, 2005. https://doi.org/10.1038/nmat1500
  16. Kim, Y., Cook, S., Tuladhar, S. M., Nelson, J., Durrant, J. R., Bradley, D. D. C., Giles, M., McCulloch, I., Ha, C. S., Ree, M., "A strong regioregularity effect in self-organizing conjugated polymer films and high-efficiency polythiophene:fullerene solar cells", Nat. Mater., Vol. 5, pp. 197-203, 2006. https://doi.org/10.1038/nmat1574
  17. Kim, Y., Choulis, S. A., Nelson, J., Bradley, D. D. C., Cook, S., Durrant, J. R., "Device annealing effect in organic solar cells with blends of regioregular poly(3-hexylthiophene) and soluble fullerene", Appl. Phys. Lett., Vol. 86, No. 6, pp. 063502, 2005. https://doi.org/10.1063/1.1861123
  18. Zhang, Y., Zhou, H., Zhang, Y., Seifter, J., Collins, S. D., Lou, C., Bazan, G. C., Nguyen, T., Heeger, A. J., "Molecular doping enhances photoconductivity in polymer bulk heterojunction solar cells", Adv. Mater., Vol. 25, No. 48, pp. 7038-7044, 2013. https://doi.org/10.1002/adma.201302159
  19. Wang, Y., Liu, Y., Chen, S., Peng, R., Ge, Z., "Significant enhancement of polymer solar cell performance via side-chain engineering and simple solvent treatment", Chem. Mater., Vol. 25, No. 15, pp. 3196-3204, 2013. https://doi.org/10.1021/cm401618h
  20. Lee, S., Nam, S., Seo, J., Jeong, J., Kim, H., Woo, S., Kim, Y., "Polymer solar cells with micrometer-scale engraved active nanolayers fabricated by pressing with metal molds", Energy Technol., Vol. 2, pp. 713-720, 2014. https://doi.org/10.1002/ente.201402034
  21. Nam, S., Shin, M., Kim, H., Ha, C. S., Ree, M., Kim, Y., "Improved performance of polymer:polymer solar cells by doping electron-accepting polymer with an organosulfonic acid", Adv. Funct. Mater., Vol. 21, pp. 4527-4534, 2011. https://doi.org/10.1002/adfm.201101215
  22. Shin, M., Kim, H., Park, J., Nam, S., Heo, K., Ree, M., Ha, C. S., Kim, Y., "Abrupt morphology change upon thermal annealing in poly(3-Hexylthiophene)/soluble fullerene blend films for polymer solar cells", Adv. Funct. Mater., Vol. 20, pp. 748-754, 2010. https://doi.org/10.1002/adfm.200901655
  23. Chen, D., Nakahara, A., Wei, D., Nordlund, D., Russell, T. P., "P3HT/PCBM bulk heterojunction organic photovoltaics: correlating efficiency and morphology", Nano Lett., Vol. 11, No. 2, pp. 561-567, 2011. https://doi.org/10.1021/nl103482n
  24. Nam, S., Lee, S., Lee, I., Shin, M., Kim, M., Kim, Y., "Nanomorphology-driven two-stage hole mobility in blend films of regioregular and regiorandom polythiophenes", Nanoscale, Vol. 3, pp. 4261-4269, 2011. https://doi.org/10.1039/c1nr10670h
  25. Kniepert, J., Lange, I., Kaap, N., Koster, L., Neher, D., "A conclusive view on charge generation, recombination, and extraction in as-prepared and annealed P3HT:PCBM blends: combined experimental and simulation work", Adv. Energy Mater., Vol. 4, No. 7, pp. 1301401, 2014. https://doi.org/10.1002/aenm.201301401
  26. Ameri, T., Min, J., Machui, F., Baran, D., Forster, M., Schottler, K. J., Dolfen, D., Scherg, U., Brabec, C. J., "Performance enhancement of the P3HT/PCBM solar cells through NIR sensitization using a small-bandgap polymer", Adv. Energy Mater., Vol. 2, No. 10, pp. 1198-1202, 2012. https://doi.org/10.1002/aenm.201200219
  27. Kim, H., Nam, S., Lee, H., Woo, S., Ha, C. S., Ree, M., Kim, Y., "Influence of controlled acidity of hole-collecting buffer layers on the performance and lifetime of polymer:fullerene solar cells", J. Phys. Chem. C, Vol. 115, No. 27, pp. 13502-13510, 2011. https://doi.org/10.1021/jp2028615
  28. Chang, S., Liao, H., Shao, Y., Sung, Y., Hsu, S., Ho, C., Su, W., Chen, Y., "Enhancing the efficiency of low bandgap conducting polymer bulk heterojunction solar cells using P3HT as a morphology control agent", J. Mater. Chem. A, Vol. 1, pp. 2447-2452, 2013. https://doi.org/10.1039/c2ta00990k
  29. Nam, S., Lee, S., Jeong, J., Seo, J., Kim, H., Song, D., Kim, Y., "Light-induced open circuit voltage increase in polymer solar cells with ternary bulk heterojunction nanolayers", ACS Sustain. Chem. Eng., Vol. 3, No. 1, pp. 55-62, 2014. https://doi.org/10.1021/sc500505t
  30. Han, H., Lee, H., Nam, S., Jeong, J., Lee, I., Kim, H., Ha, C. S., Kim, Y., "Poly (3-hexylthiophene-co-benzothiadiazole) (THBT) as an electron- accepting polymer for normal and inverted type all-polymer solar cells", Polym. Chem., Vol. 4, pp. 2053-2061, 2013. https://doi.org/10.1039/c2py21144k
  31. Duong, D., Wang, C., Antono, E., Toney, M. F., Salleo, A., "The chemical and structural origin of efficient p-type doping in P3HT", Org. Electron., Vol. 14, No. 5, pp. 1330-1336, 2013. https://doi.org/10.1016/j.orgel.2013.02.028
  32. Nam, S., Park, S., Seo, J., Jeong, J., Lee, S., Kim, J., Kim, H., Kim, Y., "Influence of annealing temperature on the nanostructure and performance of polymer:polymer solar cells", J. Korean Phys. Soc., Vol. 63, No. 7, pp. 1368-1372, 2013. https://doi.org/10.3938/jkps.63.1368
  33. Lobez, J. M., Andrew, T. L., Bulovic, V., Swager, T. M., "Improving the performance of P3HT-fullerene solar cells with side chain functionalized poly(thiophene) additives: a new paradigm for polymer design", ACS Nano, Vol. 6, No. 4, pp. 3044-3056, 2012. https://doi.org/10.1021/nn204589u
  34. Park, S., Nam, S., Seo, J., Jeong, J., Lee, S., Kim, H., Kim, Y., "Effect of halogen-terminated additives on the performance and the nanostructure of all-polymer solar cells", J. Korean Phys. Soc., Vol. 66, No. 3, pp. 521-525, 2015. https://doi.org/10.3938/jkps.66.521
  35. Krantz, J., Stubhan, T., Richter, M., Spallek, S., Litzov, I., Matt, G. J., Spiecker, E., Brabec, C. J., "Spray-coated silver nanowires as top electrode layer in semitransparent P3HT: PCBM based organic solar cell devices", Adv. Funct. Mater., Vol. 23, No. 13, pp. 1711-1717, 2013. https://doi.org/10.1002/adfm.201202523
  36. Lee, S., Nam, S., Kim, H., Kim, Y., "Compression-induced open circuit voltage increase in all-polymer solar cells with lithium fluoride nanolayers", ACS Sustain. Chem. Eng., Vol. 1, No. 10, pp. 1280-1285, 2013. https://doi.org/10.1021/sc400141q
  37. Woo, S., Kim, W., Kim, H., Yi, Y., Lyu, H., Kim, Y., "8.9% single-stack inverted polymer solar cells with electron-rich polymer nanolayer modified inorganic electron-collecting buffer layers", Adv. Energy Mater., Vol. 4, No. 7, pp. 1301692, 2014. https://doi.org/10.1002/aenm.201301692
  38. Bencheikh, F., Duche, D., Ruiz, C. M., Simon, J., Escoubas, L., "Study of optical properties and molecular aggregation of conjugated low band gap copolymers: PTB7 and PTB7-Th", J. Phys. Chem. C, Vol. 119, No. 43, pp. 24643-24648, 2015. https://doi.org/10.1021/acs.jpcc.5b07803
  39. Wu, C., Chueh, C., Xi, Y., Zhong, H., Gao, G., Wang, Z., Pozzo, L. D., Wen, T., Jen, A. K. Y., "Influence of molecular geometry of perylene diimide dimers and polymers on bulk heterojunction morphology toward high performance nonfullerene polymer solar cells", Adv. Funct. Mater., Vol. 25, No. 33, pp. 5326-5332, 2015. https://doi.org/10.1002/adfm.201501971
  40. Jeong, J., Seo, J., Nam, S., Han, H., Kim, H., Anthopoulos, T. D., Bradley, D. C. C., Kim, Y., "Significant stability enhancement in high efficiency polymer:fullerene bulk heterojunction solar cells by blocking ultraviolet photons from solar light", Adv. Sci., Vol. 3, No. 4, pp. 1500269, 2016. https://doi.org/10.1002/advs.201500269
  41. Li, N., Brabec, C. J., "Air-processed polymer tandem solar cells with power conversion efficiency exceeding 10%", Energy Environ. Sci., Vol. 8, pp. 2902-2909, 2015. https://doi.org/10.1039/C5EE02145F
  42. Lee, C., Kang, H., Lee, W., Kim, T., Kim, K., Woo, H., Wang, C., Kim, B., "High performance all-polymer solar cells via side-chain engineering of the polymer acceptor: the importance of the polymer packing structure and the nanoscale blend morphology", Adv. Mater., Vol. 27, pp. 2466-2471, 2015. https://doi.org/10.1002/adma.201405226
  43. Sharma, R., Lee, H., Gupta, V., Kim, H., Kumar, M., Sharma, C., Chand, S., Yoo, S., Gupta, D., "Photo-physics of PTB7, PCBM and ICBA based ternary solar cells", Org. Electron., Vol. 34, pp. 111-117, 2016. https://doi.org/10.1016/j.orgel.2016.04.022
  44. He, Z., Xiao, B., Liu, F., Wu, H., Yang, Y., Xiao, S., Wang, C., Russell, T. P., Cao, Y., "Single junction polymer solar cells with high efficiency and photovoltage", Nat. Photonics, Vol. 9, pp. 174-179, 2015. https://doi.org/10.1038/nphoton.2015.6
  45. Liu, T., Huo, L., Fan, B., Cai, Y., Kim, T., Kim, J., Choi, H., Sun, Y., "Ternary organic solar cells based on two highly efficient polymer donors with enhanced power conversion efficiency", Adv. Energy Mater., Vol. 6, No. 6, pp. 1502109, 2016. https://doi.org/10.1002/aenm.201502109
  46. Kim, W., Kim, J., Kim, E., Ahn, T., Wang, D., Park, J., "Conflicted effects of a solvent additive on PTB7:PC71BM bulk heterojunction solar cells", J. Phys. Chem. C, Vol. 119, No. 11, pp. 5954-5961, 2015. https://doi.org/10.1021/jp510996w
  47. Nam, S., Seo, J., Woo, S., Kim, W., Kim, H., Bradley, D. D. C., Kim, Y., "Inverted polymer fullerene solar cells exceeding 10% efficiency with poly(2-ethyl-2-oxazoline) nanodots on electron-collecting buffer layers", Nat. Commun., Vol. 6, pp. 8929, 2016.