References
- M. A. Bellinger, A. J. Waddon, E. D. T. Atkins, and W. J. MacKnight, "Structure and Morphology of Nylon 4 Chain-Folded Lammellar Crystals", Macromolecules, 1994, 27, 2030-2135.
- H. H. Cho, J. W. Jeon, M. H. Lee, S. H. Lee, and S. T. Kwon, "Structure and Physical Properties of Variously Drawn Nylon 6-ran-Nylon 4 Copolymer Fibers (I)", Text. Sci. Eng., 2011, 48, 150-155.
- S. H. Lee and H. H. Cho, "Fine Structure and Physical Properties of Nylon 4 Copolymer (I)-Effects of the Various Drawing Speeds", Text. Sci. Eng., 2011, 48, 91-97.
- S. H. Lee and H. H. Cho, "Fine Structure and Physical Properties of Nylon 4 Copolymer (II)-Effects on the Various Annealing Temperature", Text. Sci. Eng., 2011, 48, 340-346.
- S. H. Lee and H. H. Cho, "Fine Structure and Physical Properties of Nylon 4 Copolymer (III)-Effect of the Contents of Nylon 4", Text. Sci. Eng., 2012, 49, 232-239. https://doi.org/10.12772/TSE.2012.49.4.232
- H. H. Cho, M. H. Lee, G. Y. Kim, S. H. Lee, and H. K. Noh, "Three Directional Crystal Structure Changes of Nylon 6-ran-Nylon 4 Copolymer Films by Drawing Ratio and Elevating Temperature", Text. Sci. Eng., 2012, 49, 106-111. https://doi.org/10.12772/TSE.2012.49.2.106
- N. C. Kim, J. H. Kim, S. W. Nam, B. S. Jeon, Y. T. Yoo, and Y. J. Kim, "Synthesis and Characterization of Very High Molecular Weight Nylon 4 and Nylon 4/6 Copolymer", Polymer(Korea), 2013, 37, 211-217.
- B. C. Chun and D. W. Chung, "Synthesis and Mechanical Properties of Nylon 6 Block Copolymer via Anionic Polymerization", Polymer(Korea), 1999, 23, 329-337.
- M. Bermudez, S Leon, C. Aleman, and S. Munoz-Guerra, "Comparison of Lamellar Crystal Structure and Morphology of Nylon 46 and Nylon 5", Polymer, 2000, 41, 8961-8973. https://doi.org/10.1016/S0032-3861(00)00239-1
- R. J. Gaymans, T. E. C. Van utteren, J. W. A. Van den berg, and J. Schuyer, "Preparation and Some Properties of Nylon 46", J. Polym. Sci.: Polym. Chem. Ed., 1997, 15, 537-545.
- C. S. Ha, M. G. Ko, and W. J. Cho, "Miscibility of Nylon 46 and Ethylene-vinyl Alcohol Copolymer Blends", Polymer, 1997, 38, 1243-1246. https://doi.org/10.1016/S0032-3861(96)00821-X
- D. H. Cho, E. Zhmayev, and Y. L. Joo, "Structural Studies of Electrospun Nylon 6 Fibers from Solution and Melt", Polymer, 2011, 52, 4600-4609. https://doi.org/10.1016/j.polymer.2011.07.038
- S. Y. Kwak, J. H. Kim, S. Y. Kim, H. G. Jeong, and I. H. Kwon, "Microstructural Investigation of High-Speed Melt-Spun Nylon 6 Fibers Produced with Variable Spinning Speeds", J. Polym. Sci.: Part B: Polym. Phy., 2000, 38, 1285-1293. https://doi.org/10.1002/(SICI)1099-0488(20000515)38:10<1285::AID-POLB30>3.0.CO;2-7
- S. Shayestehfar, M. E. Yazdanshenas, R. Khajavi, and A. S. Rashidi, "Physical and Mechanical Properties of Nylon 6/Titanium Dioxide Micro and Nano-composite Multifilament Yarns", J. Eng. Fibers Fabrics, 2014, 9, 158-167.