참고문헌
- Abidi, M. and Madhuri, M. (2012), "Review on shear wall for soft story high- rise buildings", Int. J. Eng. Adv. Tech., 1(6).
- Al-Aasam, H.S. and Mandal, P. (2013), "Simplified procedure to calculate by hand the natural periods of semirigid steel frames", J. Struct. Eng., ASCE, 139(6), 1082-1087. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000695
- Baikov, V. and Sigalov, E. (1983), Reinforced Concrete Structures, Volume 2, Moscov: Mir Publisher, 390.
- Balendra, T., Swaddiwudhipong, S. and Quek S.T. (1984), "Free vibration of asymmetric shear wall-frame buildings", Earth. Eng. Struct. Dyn., 12(5), 629-650. https://doi.org/10.1002/eqe.4290120505
- Basu, A., Nagpal, A. K,. and Kaul, S. (1984), "Charts for seismic design of frame-wall systems", J. Struct. Eng. ASCE, 110(1), 31-46. https://doi.org/10.1061/(ASCE)0733-9445(1984)110:1(31)
-
Belhadj, A.H. and Meftah, S.A. (2015), "Simplified finite element modelling of non-uniform tall building structures comprising wall and frame assemblies including P-
$\Delta$ effects", Earthq. Struct., 8(1), 253-273. https://doi.org/10.12989/eas.2015.8.1.253 - Bilyap, S. (1979), "An approximate solution for high- rise reinforced concrete panel buildings with combined diaphragms", Int. J. Housing Sci., 3(6), 477-481.
- Bozdogan, K.B. (2009), "An approximate method for static and dynamic analyses of symmetric wall-frame buildings", Struct. Des. Tall Spec. Build., 18(3), 279-290. https://doi.org/10.1002/tal.409
- Carpinteri, A., Lacidogna, G. and Cammarano, S. (2013), "Structural analysis of high- rise buildings under horizontal loads: A study on the Intesa Sanpaolo Tower in Turin", Eng. Struct., 56, 1362-1371. https://doi.org/10.1016/j.engstruct.2013.07.009
- Colunga, A.T. (2010), "Review of the Soft Story High-Rise Buildings", Open Civ. Eng. J., 4, 1-15.
- Dym, C.L. and Williams, H.E. (2007), "Estimating fundamental frequencies of tall buildings", J. Struct. Eng., ASCE, 133(10), 1479-1483. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:10(1479)
- Georgoussis, K.G. (2006), "A simple model for assessing and modal response quantities in symmetrical buildings", Struct. Des. Tall Spec. Build., 15(2), 139-151. https://doi.org/10.1002/tal.286
- Georgoussis, K.G. (2014), "Modified seismic analysis of multistory asymmetric elastic buildings and suggestions for minimizing the rotational response", Earthq. Struct., 7(1), 39-55. https://doi.org/10.12989/eas.2014.7.1.039
- Heidebrecht, A.C. and Stafford Smith, B. (1973), "Approximate analysis of tall wall-frame buildings", J. Struct. Eng., ASCE, 99(2), 199-221.
- Hoenderkamp, D.C.J. (2001), "Elastic analysis of asymmetric tall buildings", Struct. Des. Tall Build., 10(4), 245-261. https://doi.org/10.1002/tal.183
- Hoenderkamp, D.C.J. (2002), "A simplified analysis of high-Rise structures with cores", Struct. Des. Tall Build., 11(2), 93-107. https://doi.org/10.1002/tal.192
- Jahanshahi, M.R. and Rahgozar, R. (2012), "Free vibration analysis of combined sytem with variable cross section in tall buildings", Struct. Eng. Mech., 42(4), 715-728. https://doi.org/10.12989/sem.2012.42.5.715
- Kazaz, I. and Gulkan, P. (2012), "An improved frame-shear wall model:continuum approach", Struct. Des. Tall Spec. Build., 21(7), 524-542. https://doi.org/10.1002/tal.626
- Kuang, J.S. and Ng, S.C. (2000), "Coupled lateral vibration of asymmetric shear wall structures", Thin Wall. Struct., 38(2), 93-104. https://doi.org/10.1016/S0263-8231(00)00033-1
- Kuang, J.S. and Ng, C. (2009), "Lateral shear -St. Venant torsion coupled vibration of asymmetric -plan frame structures", Struct. Des. Tall Spec. Build., 18(6), 647-656. https://doi.org/10.1002/tal.456
- Kaviani, P., Rahgozar, R. and Saffari, H. (2008), "Approximate analysis of tall buildings using sandwich beam models with variable cross-section", Struct. Des. Tall Spec. Build., 17(2), 401-418. https://doi.org/10.1002/tal.360
- Laier, J.E. (2008), "An improved continuous medium technique for structural frame analysis", Struct. Des. Tall Spec. Build., 17(1), 25-38. https://doi.org/10.1002/tal.309
- Malekinejad, M. and Rahgozar, R. (2013), "An analytical approach to free vibration analysis of multioutrigger- belt truss-reinforced tall buildings", Struct. Des. Tall Spec. Build., 22(4), 382-398. https://doi.org/10.1002/tal.703
- Mancini, E. and Savassi, W. (1999), "Tall buildings structures unified plane panels behavior", Struct. Des. Tall Build., 8(2), 155-170. https://doi.org/10.1002/(SICI)1099-1794(199906)8:2<155::AID-TAL125>3.0.CO;2-6
- Meftah, S.A. and Tounsi, A. (2008), "Vibration characteristics of tall buildings braced by shear walls and thin-walled open-section structures", Struct. Des. Tall Spec. Build., 17(1), 203-216. https://doi.org/10.1002/tal.346
- Miranda, E. (1999), "Approximate lateral drift demands in multi-story buildings subjected to earthquakes", J. Struct. Eng., ASCE, 125(4), 417-425. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:4(417)
- Miranda, E. and Reyes, J.C. (2002), "Approximate lateral drift demands in multi-story buildings with nonuniform stiffness", J. Struct. Eng., ASCE, 128(7), 840-849. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:7(840)
- Miranda, E. and Taghavi, S. (2005), "Approximate floor acceleration demands in multistorey buildings I formulation", J. Struct. Eng., ASCE, 131(2), 203-211. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:2(203)
- Ng, S.C. and Kuang, J.S. (2000), "Triply coupled vibration of asymmetric wall-frame structures", J. Struct. Eng., ASCE, 128(7), 840-849.
- Nollet, J.M. and Stafford Smith, B. (1993), "Behavior of curtailed wall-frame structures", J. Struct. Eng., ASCE, 119(10), 2835-2853. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:10(2835)
- Pan, P., Wu, S. and Nie, X. (2015), "A distributed parameter model of a frame pin-supported wall structure", Earthq. Eng. Struct. Dyn, 44(10), 1643-1659. https://doi.org/10.1002/eqe.2550
- Potzta, G. and Kollar, L.P. (2003), "Analysis of building structures by replacement sandwich beams", Int. J. Solid. Struct., 40(3), 535-553. https://doi.org/10.1016/S0020-7683(02)00622-4
- Quanfeng, W., Lingyun, W. and Qiangsheng, L. (1999), "Seismic response of stepped frame-shear wall structures by using numerical method", Comput. Method. Appl. Mech. Eng., 173(1), 31-39. https://doi.org/10.1016/S0045-7825(98)00253-9
- Rafezy, B., Zare, A. and Howson, W.P. (2007), "Coupled lateral -torsional frequencies of asymmetric, three dimensional frame structures", Int. J. Solid. Struct., 44(1), 128-144. https://doi.org/10.1016/j.ijsolstr.2006.04.019
- Rafezy, B. and Howson, W.P. (2008), "Vibration analysis of doubly asymmetric, three dimensional structures comprising wall and frame assemblies with variable cross section", J. Sound Vib., 318(1-2), 247-266. https://doi.org/10.1016/j.jsv.2008.04.018
- Reinoso, E. and Miranda, E. (2005), "Estimation of floor acceleration demands in high rise buildings during earthquakes", Struct. Des. Tall Spec. Build., 14(2), 107-130. https://doi.org/10.1002/tal.272
- Rodriguez, A.A. and Miranda, E. (2015), "Assesment of building behavior under near-fault pulse-like ground motions through simplified models", Soil Dyn. Earthq. Eng., 79, 47-58. https://doi.org/10.1016/j.soildyn.2015.08.009
- Rosman, R. (1964), "Approximate analysis of shear walls subject to lateral loads", Proc. Am. Concr. Inst., 61(6), 717-734.
- Rosman, R. (1974), "Stability and dynamics of shear -wall frame structures", Build. Sci., 9, 55-63. https://doi.org/10.1016/0007-3628(74)90040-1
- Rosman, R. (1981), "Buckling and vibrations of spatial building structures", Eng. Struct., 3(4), 194-202. https://doi.org/10.1016/0141-0296(81)90001-8
- Savassi, W. and Mancini, E. (2004), "One-dimensional finite element solution for tall building structures unified plane panels formulation", Struct. Des. Tall Spec. Build., 13(4), 315-333. https://doi.org/10.1002/tal.256
- Savassi, W. and Mancini, E. (2009), "One-dimensional finite element solution for non-uniform tall building structures and loading", Struct. Des. Tall Spec. Build., 18(4), 441-453. https://doi.org/10.1002/tal.445
- Stafford Smith, B. and Crowe, E. (1986), "Estimating periods of vibration of tall buildings", J. Struct. Eng., ASCE, 112(5), 1005-1019. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:5(1005)
- Swaddiwudhipong, S., Lee, L.S. and Zhou, Q. (2001), "Effect of the axial deformation on vibration of tall buildings", Struct. Des. Tall Build., 10(2), 79-91. https://doi.org/10.1002/tal.175
- Taghavi, S. and Miranda, E. (2005), "Approximate floor acceleration demands in multistorey buildings II: applications", J. Struct. Eng., ASCE, 131(2), 212-220. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:2(212)
- Tarjan, G. and Kollar, P.L. (2004), "Approximate analysis of building structures with identical stories subjected to earthquakes", Int. J. Solid. Struct., 41(5-6), 1411-1433. https://doi.org/10.1016/j.ijsolstr.2003.10.021
- Tekeli, H., Atimtay, E. and Turkmen, M. (2015), "An approximation method for design applications related to sway in RC framed buildings", Int J.Civ. Eng., 13(3), 321-330.
- Toutanji, H. (1997), "The effect of foundation flexibility on the interaction of walls and frames", Eng. Struct., 19(12), 1036-1042. https://doi.org/10.1016/S0141-0296(97)00046-1
- Wang, S.K. (1997), "Stiffness, stability and fundemantal period of coupled shear walls of variable thickness", Proc. Inst. Civ. Eng. Struct. Build., 122(3), 334-338. https://doi.org/10.1680/istbu.1997.29804
- Wang, Y., Arnaouti, C. and Guo, S. (2000), "A Simple approximate formulation for the first two frequencies of asymmetric wall-frame multi-storey building structures", J. Sound Vib., 236(1), 141-160. https://doi.org/10.1006/jsvi.2000.2984
- Wdowicki, J. and Wdowicka, E. (2012), "Analysis of shear wall structures of variable cross section", Struct. Des. Tall Spec. Build., 21(1), 1-15. https://doi.org/10.1002/tal.581
- Yang, D., Pan, J. and Li, G. (2010), "Interstory drift ratio of building structures subjected to near-fault ground motions based on generalized drift spectral analysis", Soil Dyn. Earthq. Eng., 30(11), 1182-1197. https://doi.org/10.1016/j.soildyn.2010.04.026
- Zalka, K.A. (2000), Global Structural analysis of Buildings, Taylor & Francis Group, Boca Raton, FL, USA.
- Zalka, K.A. (2001), "A simplified method for calculation of natural frequencies of wall-frame buildings", Eng. Struct., 23(12), 1544-1555. https://doi.org/10.1016/S0141-0296(01)00053-0
- Zalka, K.A. (2009), "A simple method for the deflection analysis of tall-wall-frame building structures under horizontal load", Struct. Des. Tall Spec. Build., 18(3), 291-311. https://doi.org/10.1002/tal.410
- Zalka, K.A. (2013), Structural analysis of regular multi-storey buildings, Taylor & Francis Group, Boca Raton, FL, USA.
- Zalka, K.A. (2014), "Maximum deflection of asymmetric wall-frame buildings under horizontal load", Per. Poly. Civ. Eng., 58(4), 1-10. https://doi.org/10.3311/PPch.7048
피인용 문헌
- Iterative global-local approach to consider the local effects in dynamic analysis of beams vol.6, pp.4, 2016, https://doi.org/10.12989/csm.2017.6.4.501