DOI QR코드

DOI QR Code

Development of an Investigation Method for Variation Factors of Measurement Processes

측정 프로세스의 변동 요인 조사 방법 개발

  • Choi, In-Soo (Department of Nano Metrology, Korea Polytechnics II) ;
  • Kang, Chang Wook (Department of Industrial and Management Engineering, Hanyang University)
  • 최인수 (한국폴리텍대학II 나노측정과) ;
  • 강창욱 (한양대학교 산업경영공학과)
  • Received : 2016.02.25
  • Accepted : 2016.06.04
  • Published : 2016.06.30

Abstract

There can be included a variety of uncertainties in all measurement results whether we can perceive or not on the causes. These uncertainties may end up in lowering the reliability of measurement results and also deteriorate the level of quality. For the purpose, we tried to combine the strengths of measurement uncertainty and measurement system analysis together to present a practical flowchart so as to verify those potential variation factors in general measurement processes. As a case study, we did an experiment and gathered data on the length between two holes of an engine cylinder head which is a core part for vehicles with a coordinate measuring machine and estimated nine uncertainty factors of it. Consequently, it was identified that the four primary factors among the nine which were related to the measurement standard, random errors or spread of the repeat measurements, differences between the coefficients of thermal expansion and the environment especially had been the influence around the laboratory. Since it is impossible to analyze the equipment and appraisal variations respectively through the only measurement uncertainty, we have used the measurement system analysis following the flowchart. Showing the result of being just about 0.5% lower for the appraisal variation, and the equipment variation occupied about 7% for the total Gage R&R. Through this research, we have come to a conclusion that much more detail analysis on variation factors can be possible to be identified in measurement processes by using the developed flowchart which is composed of measurement uncertainty and measurement system analysis. Therefore, we expect engineers who are involved in quality and measurements to utilize this developed method.

Keywords

References

  1. Borror, C.M., The Certified Quality Engineer, Handbook, ASQ Quality Press, 2009.
  2. Bucher, J.L., The Metrology Handbook, ASQ, 2004, pp. 303-306, pp. 311-320.
  3. Choi, D.Y., Analysis and evaluation on Variables and uncertainty of ultra-precision position system from environmental alteration, Hanyang University, 2013.
  4. Choi, S.H., A Study on the Reduction of Uncertainty in Measurement of Hand-transmitted Vibration, Ajou University, 2007.
  5. Dietrich, E. and Schulze, A., Measurement Process Qualification, Q-DAS, 2006.
  6. Eom, H.W., Evaluation method and uncertainty analysis for the positioning error of three-DOF manipulator, Hanyang University, 2005.
  7. Ha, C.I., International Standardization Trend, Report of Korean Agency of Technology and Standards, 2008, Vol. 153, pp. 1-5.
  8. Hwang, J.D., A Study on the Vibration Tests for Reliability of the Mechanical Part Analytical Models, Changwon National University, 2012.
  9. Jang, W.S., Evaluation of Uncertainty in the results of Material Testing, Yeungnam University, 2005.
  10. Kang, G.H., A Study on Measurement Error and Uncertainty from the I-V Performance Test of Photo voltaic Modules, Konkuk University, 2009.
  11. Kang, T.W., Extrapolation and Correlation in Radiated Emission Measurements and Uncertainty in EMC Measurements, Pohang University and Science Technology, 2000.
  12. KATS, General requirements for the competence of testing and calibration laboratories, KS Q ISO IEC 17025, 2011.
  13. KATS, Guide to the expression of uncertainty in measurement, KS Q 4001, 2015.
  14. KATS, Measuring system management guidelines for industry research and development, KASTO, 2006.
  15. KATS, Test code for accuracy of coordinate measuring machines, KS B 5542, 2014.
  16. Kim, J.S., A study on the Modeling and Propagation to Evaluate Uncertainties in Measurement Results, Konkook University, 2002.
  17. Kim, Y.M., Development of an Performance Evaluation Method for Vehicle Detector Speed Measurement Applying Uncertainty in Measurement, Ajou University, 2009.
  18. Kimothi, S.K., The Uncertainty of Measurements, ASQ Quality Press, 2001.
  19. Lee, C.J., A study on the technique of measurement uncertainty in the evaluating specification of heavy electrical equipment, Hanyang University, 2001.
  20. Lee, C.Y., Development of a method for calculating uncertainty value of water quality auto-measurement system, Chungnam National University, 2007.
  21. Lee, H.S., Evaluation of uncertainties in the friction coefficient of a brake disk lining of passenger trains, Yonsei University, 2004.
  22. Lee, J.H., Analysis of Uncertainty in the Result of Measurement of Fixed Coaxial Attenuator, Kyungpook National University, 2008.
  23. Lee, S.H., Uncertainty improvement of the voltage ratio in a DC High Voltage Divider by evaluation of the ratio and the voltage coefficient, Chungnam National University, 2010.
  24. Lee, S.Y., Uncertainty evaluation of the digital imaging system for dimensional metrology, Korea Advanced Institute of Science and Technology, 1998.
  25. Lim, C.I., Study on Preparation of Fly Ash for Dioxin Proficiency Testing and Uncertainty Estimation, Kwangwoon University, 2006.
  26. Park, J.H., A study on evaluating uncertainty values of the fundamental measurements in Nakdong River National Water Quality Auto-measurement System, Kyungpook National University, 2012.
  27. Ryu, H.J., An Empirical Study on the Operations of Measuring Instrument. Inha University, 2010.
  28. Ryu, Y.C. and Kang, C.W., The Economic Design of $\bar{X}-S$ Chart Considering Measurement Error, Journal of Society of Korea Industrial and Systems Engineering, 2000, Vol. 23, No. 61, pp. 89-98.
  29. Seo, S.K., Two-Dimensional Assessment for Measurement for Measurement System Analysis, Journal of the Korean Society of Quality Management, 2013, Vol. 42, No. 4, pp. 607-616. https://doi.org/10.7469/JKSQM.2014.42.4.607
  30. Yoon, D.J., The effects of uncertainty on the tolerance of surface roughness, Kyungpook National University, 2006.
  31. Yoon, G.I., Uncertainty Evaluation for the Defect Length Measurements by the Ultrasonic Test, Soongsil University, 2011.