한국생산제조학회지 (Journal of the Korean Society of Manufacturing Technology Engineers)

  • 제25권3호
  • /
  • Pages.211-216
  • /
  • 2016
  • /
  • 2508-5093(pISSN)
  • /
  • 2508-5107(eISSN)
한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지
DOI QR코드

DOI QR Code

알루미늄 합금(Al7075-T651)의 얇은 벽 고속밀링 가공 시 가공표면 상태와 가공변형 특성

Investigation of Machined-Surface Condition and Machining Deformation in High-Speed Milling of Thin-Wall Aluminum 7075-T651

  • Koo, Joon-Young (School of Mechanical Engineering, Pusan National University) ;
  • Hwang, Moon-Chang (School of Mechanical Engineering, Pusan National University) ;
  • Lee, Jong-Hwan (Dept. of Mechatronics Engineering, Korea Polytechnic Air Colleges) ;
  • Kim, Jeong-Suk (School of Mechanical Engineering / Engineering Research Center for Net Shape and Die Manufacturing, Pusan National University)
  • 투고 : 2016.04.04
  • 심사 : 2016.06.09
  • 발행 : 2016.06.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Al alloys are useful materials having high specific strength and are used in machining of parts having thin-walled structures for weight reduction in aircraft, automobiles, and portable devices. In machining of thin-walled structures, it is difficult to maintain dimensional accuracy because machining deformation occurs because of cutting forces and heat in the cutting zone. Thus, cutting conditions and methods need to be investigated and cutting signals need to be analyzed to diagnose and minimize machining deformation and thereby enhance machining quality. In this study, an investigation on cutting conditions to minimize machining deformation and an analysis on characteristics of cutting signals when machining deformation occurs are conducted. Cutting signals for the process are acquired by using an accelerometer and acoustic emission (AE) sensor. Signal characteristics according to the cutting conditions and the relation between machining deformation and cutting signals are analyzed.

키워드

참고문헌

  1. Mohan, K. S., Pramod, R., Shashi, K. M. E., Govindaraju, H. K., 2014, Evaluation of Fracture Toughness and Mechanical Properties of Aluminum Alloy 7075, T6 with Nickel Coating, Procedia Engineering, 97 178-185. https://doi.org/10.1016/j.proeng.2014.12.240
  2. Odeshi, A. G., Adesola, A. O., Badmos, A. Y., 2013, Failure of AA6061 and 2099 Aluminum Alloys under Dynamic Shock Loading, Engineering Failure Analysis, 35 302-314. https://doi.org/10.1016/j.engfailanal.2013.02.015
  3. Ning, H., Zhigang, W., Chengyu, J., Bing, Z., 2001, Analysis on High-speed Face-milling Of 7075-T6 Aluminum using Carbide and Diamond Cutters, Int. Journal of Machine Tool and Manuf., 41:12 1763-1781. https://doi.org/10.1016/S0890-6955(01)00033-5
  4. Seguy, S., Dessein, G., Arnaud, L., 2008, Surface Roughness Variation of Thin Wall Milling, Related to Modal Interactions, Int. Journal of Machine Tools and Manuf., 48:3/4 261-274. https://doi.org/10.1016/j.ijmachtools.2007.09.005
  5. Rai, J. K., Xirouchakis, P., 2008, Finite Element Method based Machining Simulation Environment for Analyzing Part Errors Induced During Milling of Thin-walled Components, Int. Journal of Machine Tool and Manuf., 48:6 629-643. https://doi.org/10.1016/j.ijmachtools.2007.11.004
  6. Subramanian, M., Sakthivel, M., Sooryaprakash, K., Sudhakaran, R., 2013, Optimization of End Mill Tool Geometry Parameters For Al7075-T6 Machining Operations based on Vibration Amplitude by Response Surface Methodology, Procedia Engineering 64:10 690-700. https://doi.org/10.1016/j.proeng.2013.09.144
  7. Lee, C. M., Kim, S. W., Choi, K. H., Lee, D. W., 2003, Evaluation of Cutter Orientations In High-speed Ball End Milling of Cantilevershaped Thin Plate, Journal of Materials Processing Technology, 140:1/3 231-236. https://doi.org/10.1016/S0924-0136(03)00716-7
  8. Matweb, n.d., viewed 8 May 2015, .