References
- Choi, B. S., Lee, D. Y., Jin, C. K., 2013, Study of Plastic Deformation of Steel Wire for Weight Reduction of Automotive Weather Strip, The Korean Society of Automotive Engineers, 21:5 82-86.
- Park, J. -H., Kim, K. J., Yoon, J. -G., 2013, Light-weight Design of Automotive Spring Link Based on Computer Aided Engineering, The Korean Society of Automotive Engineers, 21:5 157-161.
- Kim, Y. S., Kim., I. K., Tark, J. H., Kim, D. S., 1999, A Study of Light Weight of Tie Rod End in Auto Supplies, The Korean Society for Power System Engineering, 3:3 70-75.
- Cho, J. G., Koo, J. S., Jun, H. S., 2013, A Weight-reduction Design Method by Underframe Material Substitution in a Box-type Bodyshell with Cut-outs, The Korean Society of Automotive Engineers, 21:2 45-54. https://doi.org/10.7467/KSAE.2013.21.2.045
- Jin, S. G., Park, D. H., Lee, G. S., Kim, C. W., 2013, Material Optimization of BIW for Minimizing Weight, The Korean Society of Automotive Engineers, 21:4 16-22.
- Park, K. S., Kong, C. D., Park, H. B., 2015, Structural Design of Light Weight Natural Fiber Composites for Next Generation Automobile Bonnet, Composites Research, 28:2 46-51. https://doi.org/10.7234/composres.2015.28.2.046
- Kim, K. S., KBae, K. M., Oh, S. Y., Seo, M. K., Kang, C. K., Park, S. J., 2012, Trend of Carbon Fiber-reinforced Composites for Lightweight Vehicles, Elastomers and Composites, 47:1 65-75. https://doi.org/10.7473/EC.2012.47.1.065
- Kim, G. J., Lim, J. H., Park, J. H., Choi, B. I., Lee, J. W., Kim, Y. J., 2012, Light-weight Design of Automotive AA6061 Rear Sub-frame Based on CAE Simulation, The Korean Society of Automotive Engineers, 20:3 77-82.
- Park, S. C., Shin, K. S., 1996, Mg Alloys for Weight Reduction of Automobiles, Bulletin of the Korean Inst. of Met & Mat, 9:2 160-171.
- Sanji, K., 1995, Automobile Weight Reduction and Quality Improvement of Al-Alloy Castings, Korean Foundrymen's Society, 15:2 127-137.
- MSC/MARC, 2013, MSC/MARC User's Manual Volume A, MSC Software Corporation.
Cited by
- 밸런스 바가 장착된 레이싱 스펙 브레이크 페달의 경량화 구조 해석을 통한 융합연구 vol.10, pp.10, 2016, https://doi.org/10.15207/jkcs.2019.10.10.123
- 자동차의 A필러에 대한 강도 및 내구성 해석을 통한 융합 연구 vol.10, pp.11, 2016, https://doi.org/10.15207/jkcs.2019.10.11.297