Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Potential of adaptive neuro fuzzy inference system for evaluating the factors affecting steel-concrete composite beam's shear strength

  • Safa, M. (Department of Civil Engineering, University of Malaya) ;
  • Shariati, M. (Department of Civil Engineering, University of Malaya) ;
  • Ibrahim, Z. (Department of Civil Engineering, University of Malaya) ;
  • Toghroli, A. (Department of Civil Engineering, University of Malaya) ;
  • Baharom, Shahrizan Bin (Department of Civil and Structural Engineering, National University of Malaysia) ;
  • Nor, Norazman M. (National Defence University of Malaysia) ;
  • Petkovic, Dalibor (University of Nis, Faculty of Mechanical Engineering, Department of Mechatronics and Control)
  • Received : 2015.12.21
  • Accepted : 2016.05.21
  • Published : 2016.06.30
⟨ Previous Next ⟩

Abstract

Structural design of a composite beam is influenced by two main factors, strength and ductility. For the design to be effective for a composite beam, say an RC slab and a steel I beam, the shear strength of the composite beam and ductility have to carefully estimate with the help of displacements between the two members. In this investigation the shear strengths of steel-concrete composite beams was analyzed based on the respective variable parameters. The methodology used by ANFIS (Adaptive Neuro Fuzzy Inference System) has been adopted for this purpose. The detection of the predominant factors affecting the shear strength steel-concrete composite beam was achieved by use of ANFIS process for variable selection. The results show that concrete compression strength has the highest influence on the shear strength capacity of composite beam.

Keywords

Acknowledgement

Supported by : University of Malaya

References

  1. Bailey, C., Burgess, I., Plank, R., El-Rimawi, J. and Huang, Z., Bailey, C.G., Lennon, T. and Moore, D.B. (1999), "The behaviour of full-scale steel-framed buildings subjected to compartment fires", The Struct. Eng., 77(8), 15-21.
  2. Dong, Y. and Prasad, K. (2009), "Experimental study on the behavior of full-scale composite steel frames under furnace loading", J. Struct. Eng., 135(10), 1278-1289. https://doi.org/10.1061/(ASCE)0733-9445(2009)135:10(1278)
  3. Duan, S., Wang, J., Zhou, Q. and Wang, H. (2010), "An experimental study on double steel-concrete composite beam specimens", In: Challenges, Opportunities and Solutions in Structural Engineering and Construction, Taylor & Francis Group, London, UK, pp. 209-214.
  4. Ekici, B.B. and Aksoy, U.T. (2011), "Prediction of building energy needs in early stage of design by using ANFIS", Expert Syst. Appl., 38(5), 5352-5358. https://doi.org/10.1016/j.eswa.2010.10.021
  5. Hakim, S.J.S., Noorzaei, J., Jaafar, M., Jameel, M. and Mohammadhassani, M. (2011), "Application of artificial neural networks to predict compressive strength of high strength concrete", Int. J. Phys. Sci., 6(5), 975-981.
  6. Inal, M. (2008), "Determination of dielectric properties of insulator materials by means of ANFIS: a comparative study", J. Mater. Process. Technol., 195(1), 34-43. https://doi.org/10.1016/j.jmatprotec.2007.04.106
  7. Jang, J.-S. (1993), "ANFIS: Adaptive-network-based fuzzy inference system", IEEE Transactions on Systems, Man and Cybernetics, 23(3), 665-685. https://doi.org/10.1109/21.256541
  8. Khajeh, A., Modarress, H. and Rezaee, B. (2009), "Application of adaptive neuro-fuzzy inference system for solubility prediction of carbon dioxide in polymers", Expert Syst. Appl., 36(3), 5728-5732. https://doi.org/10.1016/j.eswa.2008.06.051
  9. Kurnaz, S., Cetin, O. and Kaynak, O. (2010), "Adaptive neuro-fuzzy inference system based autonomous flight control of unmanned air vehicles", Expert Syst. Appl., 37(2), 1229-1234. https://doi.org/10.1016/j.eswa.2009.06.009
  10. Liew, R.J.Y. and Xiong, D.X. (2009), "Effect of preload on the axial capacity of concrete-filled composite columns", J. Construct. Steel Res., 65(3), 709-722. https://doi.org/10.1016/j.jcsr.2008.03.023
  11. Lo, S.-P. and Lin, Y.-Y. (2005), "The prediction of wafer surface non-uniformity using FEM and ANFIS in the chemical mechanical polishing process", Journal of Materials Processing Technology, 168(2), 250-257. https://doi.org/10.1016/j.jmatprotec.2005.01.010
  12. Maleki, S. and Bagheri, S. (2008), "Behavior of channel shear connectors, Part I: Experimental study", J. Construct. Steel Res., 64(12), 1333-1340. https://doi.org/10.1016/j.jcsr.2008.01.010
  13. Maleki, S. and Mahoutian, M. (2009), "Experimental and analytical study on channel shear connectors in fiber-reinforced concrete", J. Construct. Steel Res., 65(8-9), 1787-1793. https://doi.org/10.1016/j.jcsr.2009.04.008
  14. Michels, J., Martinelli, E., Czaderski, C. and Motavalli, M. (2014), "Prestressed CFRP strips with gradient anchorage for structural concrete retrofitting: Experiments and numerical modeling", Polymers, 6(1), 114-131. https://doi.org/10.3390/polym6010114
  15. Mohammadhassani, M., Nezamabadi-Pour, H., Jameel, M. and Garmasiri, K. (2013), "Applications of the ANFIS and LR in the prediction of strain in tie section of concrete deep beams", Comput. Concrete, 12(3), 243-259. https://doi.org/10.12989/cac.2013.12.3.243
  16. Mohammadhassani, M., Nezamabadi-Pour, J., Suhatril, M. and Shariati, M. (2013), "Identification of a suitable ANN architecture in predicting strain in tie section of concrete deep beams", Struct. Eng. Mech., Int. J., 46(6), 853-868. https://doi.org/10.12989/sem.2013.46.6.853
  17. Mohammadhassani, M., Nezamabadi-Pour, M., Suhatril, M. and Shariati, M. (2014a), "An evolutionary fuzzy modelling approach and comparison of different methods for shear strength prediction of high-strength concrete beams without stirrups", Smart Struct. Syst., Int. J., 14(5), 785-809. https://doi.org/10.12989/sss.2014.14.5.785
  18. Mohammadhassani, M., Suhatril, M., Shariati, M. and Ghanbari, F. (2014b), "Ductility and strength assessment of HSC beams with varying of tensile reinforcement ratios", Struct. Eng. Mech., Int. J., 48(6), 833-848.
  19. Petkovic, D., Issa, M., Pavlovic, N.D., Zentner, L. and Cojbasic, Z. (2012), "Adaptive neuro fuzzy controller for adaptive compliant robotic gripper", Expert Syst. Appl., 39(18), 13295-13304. https://doi.org/10.1016/j.eswa.2012.05.072
  20. Prakash, A., Anandavalli, N., Madheswaran, C. and Lakshmanan, N. (2012), "Modified push-out tests for determining shear strength and stiffness of HSS stud connector-experimental study", Int. J. Compos. Mater., 2(3), 22-31. https://doi.org/10.5923/j.cmaterials.20120203.02
  21. Queiroz, F., Vellasco, P. and Nethercot, D. (2007), "Finite element modelling of composite beams with full and partial shear connection", J. Construct. Steel Res., 63(4), 505-521. https://doi.org/10.1016/j.jcsr.2006.06.003
  22. Shariati, M., Ramli Sulong, N.H. and Arabnejad Khanouki, M.M. (2010), "Experimental and analytical study on channel shear connectors in light weight aggregate concrete", Proceedings of the 4th International Conference on Steel & Composite Structures, Sydney, Australia, July.
  23. Shariati, M., Ramli Sulong, N.H., Arabnejad Khanouki, M.M. and Shariati, A. (2011a), "Experimental and numerical investigations of channel shear connectors in high strength concrete", Proceedings of the 2011 World Congress on Advances in Structural Engineering and Mechanics (ASEM'11+), Seoul, South Korea, September.
  24. Shariati, M., Ramli Sulong, N.H., Arabnejad Khanouki, M.M. and Mahoutian, M. (2011b), "Shear resistance of channel shear connectors in plain, reinforced and lightweight concrete", Sci. Res. Essays, 6(4), 977-983.
  25. Shariati, M., Ramli Sulong, N.H., Sinaei, H., Arabnejad Khanouki, M.M. and Shafigh, P. (2011c), "Behavior of channel shear connectors in normal and light weight aggregate concrete (experimental and analytical study)", Adv. Mater. Res., 168, 2303-2307.
  26. Shariati, M., Ramli Sulong, N.H., Arabnejad Khanouki, M.M., Shafigh, P. and Sinaei, H. (2011d), "Assessing the strength of reinforced concrete structures through Ultrasonic Pulse Velocity and Schmidt Rebound Hammer tests", Sci. Res. Essays, 6(1), 213-220.
  27. Shariati, M., Ramli Sulong, N.H. and Arabnejad Khanouki, M.M. (2012a), "Experimental assessment of channel shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Mater. Des., 34, 325-331. https://doi.org/10.1016/j.matdes.2011.08.008
  28. Shariati, A., Ramli Sulong, N.H., Suhatril, M. and Shariati, M. (2012b), "Investigation of channel shear connectors for composite concrete and steel T-beam", Int. J. Phys. Sci., 7(11), 1828-1831.
  29. Shariati, A., Ramli Sulong, N.H., Suhatril, M. and Shariati, M. (2012c), "Various types of shear connectors in composite structures: A review", Int. J. Phys. Sci., 7(22), 2876-2890.
  30. Shariati, M., Ramli Sulong, N.H., Suhatril, M., Shariati, A., Arabnejad Khanouki, M. and Sinaei, H. (2012d), "Fatigue energy dissipation and failure analysis of channel shear connector embedded in the lightweight aggregate concrete in composite bridge girders", Proceedings of the 5th International Conference on Engineering Failure Analysis, The Hague, The Netherlands, July.
  31. Shariati, M., Ramli Sulong, N.H., Suhatril, M., Shariati, A., Khanouki, M.M.A. and Sinaei, H. (2012e), "Behaviour of C-shaped angle shear connectors under monotonic and fully reversed cyclic loading: An experimental study", Mater. Des., 41, 67-73. https://doi.org/10.1016/j.matdes.2012.04.039
  32. Shariati, M., Ramli Sulong, N.H., Suhatril, M., Shariati, A., Arabnejad Khanouki, M.M. and Sinaei, H. (2013), "Comparison of behaviour between channel and angle shear connectors under monotonic and fully reversed cyclic loading", Construct. Build. Mater., 38, 582-593. https://doi.org/10.1016/j.conbuildmat.2012.07.050
  33. Shariati, A., Shariati, M., Ramli Sulong, N.H., Suhatril, M., Arabnejad Khanouki, M.M. and Mahoutian, M. (2014), "Experimental assessment of angle shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Construct. Build. Mater., 52, 276-283. https://doi.org/10.1016/j.conbuildmat.2013.11.036
  34. Slutter, R.G. (1963), "Pushout tests of welded stud shear connectors in lightweight concrete", Report No. 200.63.409.1; Fritz Engineering Laboratory, Lehigh University, Bethlehem, PA, USA.
  35. Tian, L. and Collins, C. (2005), "Adaptive neuro-fuzzy control of a flexible manipulator", Mechatronics, 15(10), 1305-1320. https://doi.org/10.1016/j.mechatronics.2005.02.001
  36. Toghroli, A., Mohammadhassani, M., Shariati, M., Suhatril, M., Ibrahim, Z. and Ramli Sulong, N.H. (2014), "Prediction of shear capacity of channel shear connectors using the ANFIS model", Steel Compos. Struct., Int. J., 17(5), 623-639. https://doi.org/10.12989/scs.2014.17.5.623
  37. Viest, I.M., Siessr, C.P., Appleton, J.H. and Newmark, N.M. (1952), "Full scale test of channel shear connectors and composite T-beams", Bulletin Series No. 405.
  38. Wang, A.J. and Chung, K.F. (2008), "Advanced finite element modelling of perforated composite beams with flexible shear connectors", Eng. Struct., 30(10), 2724-2738. https://doi.org/10.1016/j.engstruct.2008.03.001

Cited by

  1. Applicability of Newton’s law of cooling in monetary economics vol.494, 2018, https://doi.org/10.1016/j.physa.2017.12.030
  2. Prostate Cancer Probability Prediction By Machine Learning Technique vol.35, pp.10, 2017, https://doi.org/10.1080/07357907.2017.1406496
  3. A machine learning approach for predicting the relationship between energy resources and economic development vol.495, 2018, https://doi.org/10.1016/j.physa.2017.12.082
  4. Natural vibration analysis of steel–concrete composite box beam using improved finite beam element method 2018, https://doi.org/10.1177/1369433217734638
  5. Analysis of influential factors for predicting the shear strength of a V-shaped angle shear connector in composite beams using an adaptive neuro-fuzzy technique 2019, https://doi.org/10.1007/s10845-017-1306-6
  6. Rock brittleness prediction through two optimization algorithms namely particle swarm optimization and imperialism competitive algorithm pp.1435-5663, 2018, https://doi.org/10.1007/s00366-018-0648-9
  7. Feasibility of imperialist competitive algorithm to predict the surface settlement induced by tunneling pp.1435-5663, 2018, https://doi.org/10.1007/s00366-018-0641-3
  8. Applying two optimization techniques in evaluating tensile strength of granitic samples pp.1435-5663, 2019, https://doi.org/10.1007/s00366-018-0645-z
  9. Research on the Design of Roof Cutting Parameters of Non Coal Pillar Gob-side Entry Retaining Mining with Roof Cutting and Pressure Releasing pp.1573-1529, 2018, https://doi.org/10.1007/s10706-018-0676-7
  10. A combination of artificial bee colony and neural network for approximating the safety factor of retaining walls pp.1435-5663, 2018, https://doi.org/10.1007/s00366-018-0625-3
  11. An intelligent based-model role to simulate the factor of safe slope by support vector regression pp.1435-5663, 2019, https://doi.org/10.1007/s00366-018-0677-4
  12. The use of new intelligent techniques in designing retaining walls pp.1435-5663, 2019, https://doi.org/10.1007/s00366-018-00700-1
  13. Developing an innovative soft computing scheme for prediction of air overpressure resulting from mine blasting using GMDH optimized by GA pp.1435-5663, 2020, https://doi.org/10.1007/s00366-019-00720-5
  14. A novel intelligent approach to simulate the blast-induced flyrock based on RFNN combined with PSO pp.1435-5663, 2019, https://doi.org/10.1007/s00366-019-00707-2
  15. Effects of a proper feature selection on prediction and optimization of drilling rate using intelligent techniques pp.1435-5663, 2020, https://doi.org/10.1007/s00366-019-00711-6
  16. A new methodology for optimization and prediction of rate of penetration during drilling operations pp.1435-5663, 2019, https://doi.org/10.1007/s00366-019-00715-2
  17. Numerical analysis of tilted angle shear connectors in steel-concrete composite systems vol.23, pp.1, 2017, https://doi.org/10.12989/scs.2017.23.1.067
  18. Evaluation of the seismic performance of special moment frames using incremental nonlinear dynamic analysis vol.63, pp.2, 2016, https://doi.org/10.12989/sem.2017.63.2.259
  19. Evaluation of the parameters affecting the Schmidt rebound hammer reading using ANFIS method vol.21, pp.5, 2018, https://doi.org/10.12989/cac.2018.21.5.525
  20. Investigation of pipe shear connectors using push out test vol.27, pp.5, 2018, https://doi.org/10.12989/scs.2018.27.5.537
  21. Experimental investigation on shear capacity of partially prefabricated steel reinforced concrete columns vol.28, pp.1, 2018, https://doi.org/10.12989/scs.2018.28.1.073
  22. Computational investigation of the comparative analysis of cylindrical barns subjected to earthquake vol.28, pp.4, 2016, https://doi.org/10.12989/scs.2018.28.4.439
  23. Shear capacity equation for channel shear connectors in steel-concrete composite beams vol.28, pp.4, 2016, https://doi.org/10.12989/scs.2018.28.4.483
  24. Strengthening of bolted shear joints in industrialized ferrocement construction vol.28, pp.6, 2016, https://doi.org/10.12989/scs.2018.28.6.681
  25. Application of ANFIS technique on performance of C and L shaped angle shear connectors vol.22, pp.3, 2018, https://doi.org/10.12989/sss.2018.22.3.335
  26. Portland cement structure and its major oxides and fineness vol.22, pp.4, 2016, https://doi.org/10.12989/sss.2018.22.4.425
  27. Practical use of computational building information modeling in repairing and maintenance of hospital building- case study vol.22, pp.5, 2016, https://doi.org/10.12989/sss.2018.22.5.575
  28. Practical use of computational building information modeling in repairing and maintenance of hospital building- case study vol.22, pp.5, 2016, https://doi.org/10.12989/sss.2018.22.5.575
  29. Prediction of visitors' thermal comfort in open urban areas vol.59, pp.4, 2016, https://doi.org/10.5937/zasmat1804495g
  30. Analysis of the Seismic Performance of a Two-Span Specially Shaped Column Frame vol.2019, pp.None, 2016, https://doi.org/10.1155/2019/2519640
  31. Computational optimized finite element modelling of mechanical interaction of concrete with fiber reinforced polymer vol.23, pp.1, 2016, https://doi.org/10.12989/cac.2019.23.1.061
  32. An experimental study on the effect of CFRP on behavior of reinforce concrete beam column connections vol.30, pp.5, 2016, https://doi.org/10.12989/scs.2019.30.5.433
  33. Behavior of steel storage pallet racking connection - A review vol.30, pp.5, 2019, https://doi.org/10.12989/scs.2019.30.5.457
  34. Assessment of electronic system for e-patent application and economic growth prediction vol.520, pp.None, 2016, https://doi.org/10.1016/j.physa.2019.01.009
  35. Estimation of moment and rotation of steel rack connections using extreme learning machine vol.31, pp.5, 2016, https://doi.org/10.12989/scs.2019.31.5.427
  36. Moment-rotation prediction of precast beam-to-column connections using extreme learning machine vol.70, pp.5, 2016, https://doi.org/10.12989/sem.2019.70.5.639
  37. Moment-rotation prediction of precast beam-to-column connections using extreme learning machine vol.70, pp.5, 2016, https://doi.org/10.12989/sem.2019.70.5.639
  38. Intelligent design of retaining wall structures under dynamic conditions vol.31, pp.6, 2016, https://doi.org/10.12989/scs.2019.31.6.629
  39. Prediction of rock interlocking by developing two hybrid models based on GA and fuzzy system vol.35, pp.4, 2016, https://doi.org/10.1007/s00366-018-0672-9
  40. Applying several soft computing techniques for prediction of bearing capacity of driven piles vol.35, pp.4, 2016, https://doi.org/10.1007/s00366-018-0674-7
  41. Application of waste tire rubber aggregate in porous concrete vol.24, pp.4, 2016, https://doi.org/10.12989/sss.2019.24.4.553
  42. Application of Extreme Learning Machine (ELM) and Genetic Programming (GP) to design steel-concrete composite floor systems at elevated temperatures vol.33, pp.3, 2016, https://doi.org/10.12989/scs.2019.33.3.319
  43. Experimental investigation on the effect of cementitious materials on fresh and mechanical properties of self-consolidating concrete vol.8, pp.3, 2016, https://doi.org/10.12989/acc.2019.8.3.225
  44. Numerical study on the structural performance of corrugated low yield point steel plate shear walls with circular openings vol.33, pp.4, 2019, https://doi.org/10.12989/scs.2019.33.4.569
  45. Invasive Weed Optimization Technique-Based ANN to the Prediction of Rock Tensile Strength vol.9, pp.24, 2019, https://doi.org/10.3390/app9245372
  46. Application of a Hybrid Artificial Neural Network-Particle Swarm Optimization (ANN-PSO) Model in Behavior Prediction of Channel Shear Connectors Embedded in Normal and High-Strength Concrete vol.9, pp.24, 2019, https://doi.org/10.3390/app9245534
  47. Comparison of dynamic behavior of shallow foundations based on pile and geosynthetic materials in fine-grained clayey soils vol.19, pp.6, 2016, https://doi.org/10.12989/gae.2019.19.6.473
  48. Strain rate effects on soil-geosynthetic interaction in fine-grained soil vol.19, pp.6, 2016, https://doi.org/10.12989/gae.2019.19.6.533
  49. Identification of the most influencing parameters on the properties of corroded concrete beams using an Adaptive Neuro-Fuzzy Inference System (ANFIS) vol.34, pp.1, 2016, https://doi.org/10.12989/scs.2020.34.1.155
  50. Depiction of concrete structures with seismic separation under faraway fault earthquakes vol.9, pp.1, 2020, https://doi.org/10.12989/acc.2020.9.1.071
  51. On transient hygrothermal vibration of embedded viscoelastic flexoelectric/piezoelectric nanobeams under magnetic loading vol.8, pp.1, 2016, https://doi.org/10.12989/anr.2020.8.1.049
  52. Evaluating the impacts of using piles and geosynthetics in reducing the settlement of fine-grained soils under static load vol.20, pp.2, 2016, https://doi.org/10.12989/gae.2020.20.2.087
  53. Hybrid ANN-based techniques in predicting cohesion of sandy-soil combined with fiber vol.20, pp.3, 2016, https://doi.org/10.12989/gae.2020.20.3.191
  54. Experimental study on axial compressive behavior of welded built-up CFT stub columns made by cold-formed sections with different welding lines vol.34, pp.3, 2016, https://doi.org/10.12989/scs.2020.34.3.347
  55. Numerical study on the axial compressive behavior of built-up CFT columns considering different welding lines vol.34, pp.3, 2016, https://doi.org/10.12989/scs.2020.34.3.377
  56. Optimizing reinforced concrete beams under different load cases and material mechanical properties using genetic algorithms vol.34, pp.4, 2020, https://doi.org/10.12989/scs.2020.34.4.467
  57. Prediction of concrete strength in presence of furnace slag and fly ash using Hybrid ANN-GA (Artificial Neural Network-Genetic Algorithm) vol.25, pp.2, 2016, https://doi.org/10.12989/sss.2020.25.2.183
  58. Computational estimation of the earthquake response for fibre reinforced concrete rectangular columns vol.34, pp.5, 2016, https://doi.org/10.12989/scs.2020.34.5.743
  59. Novel approach for forecasting the blast-induced AOp using a hybrid fuzzy system and firefly algorithm vol.36, pp.2, 2016, https://doi.org/10.1007/s00366-019-00725-0
  60. A Monte Carlo simulation approach for effective assessment of flyrock based on intelligent system of neural network vol.36, pp.2, 2016, https://doi.org/10.1007/s00366-019-00726-z
  61. Designing traceability information systems for processed apple products chain vol.475, pp.None, 2016, https://doi.org/10.1088/1755-1315/475/1/012055
  62. Elevated temperature resistance of concrete columns with axial loading vol.9, pp.4, 2016, https://doi.org/10.12989/acc.2020.9.4.355
  63. Bending analysis of magneto-electro piezoelectric nanobeams system under hygro-thermal loading vol.8, pp.3, 2016, https://doi.org/10.12989/anr.2020.8.3.203
  64. Computational analysis of three dimensional steel frame structures through different stiffening members vol.35, pp.2, 2016, https://doi.org/10.12989/scs.2020.35.2.187
  65. Computational analysis of three dimensional steel frame structures through different stiffening members vol.35, pp.2, 2016, https://doi.org/10.12989/scs.2020.35.2.187
  66. Prediction of Lateral Deflection of Small-Scale Piles Using Hybrid PSO-ANN Model vol.45, pp.5, 2016, https://doi.org/10.1007/s13369-019-04134-9
  67. Utilization of Support Vector Models and Gene Expression Programming for Soil Strength Modeling vol.45, pp.5, 2016, https://doi.org/10.1007/s13369-020-04441-6
  68. Performance assessment of buckling restrained brace with tubular profile vol.8, pp.4, 2020, https://doi.org/10.12989/anr.2020.8.4.323
  69. Computational earthquake performance of plan-irregular shear wall structures subjected to different earthquake shock situations vol.18, pp.5, 2020, https://doi.org/10.12989/eas.2020.18.5.567
  70. Development of Advanced Computer Aid Model for Shear Strength of Concrete Slender Beam Prediction vol.10, pp.11, 2016, https://doi.org/10.3390/app10113811
  71. Experimental and Numerical Investigation of a Method for Strengthening Cold-Formed Steel Profiles in Bending vol.10, pp.11, 2020, https://doi.org/10.3390/app10113855
  72. Neuro-genetic, neuro-imperialism and genetic programing models in predicting ultimate bearing capacity of pile vol.36, pp.3, 2020, https://doi.org/10.1007/s00366-019-00752-x
  73. Developing new tree expression programing and artificial bee colony technique for prediction and optimization of landslide movement vol.36, pp.3, 2016, https://doi.org/10.1007/s00366-019-00754-9
  74. Investigation on the monotonic behavior of the steel rack upright-beam column connection vol.26, pp.1, 2016, https://doi.org/10.12989/sss.2020.26.1.103
  75. Investigation on the monotonic behavior of the steel rack upright-beam column connection vol.26, pp.1, 2016, https://doi.org/10.12989/sss.2020.26.1.103
  76. Human development index in a context of human development: Review on the western Balkans countries vol.10, pp.9, 2016, https://doi.org/10.1002/brb3.1755
  77. An improved adaptive neuro-fuzzy inference system using probability trajectory-based clustering ensemble vol.9, pp.None, 2016, https://doi.org/10.1016/j.sciaf.2020.e00520
  78. Indirect measure of shear strength parameters of fiber-reinforced sandy soil using laboratory tests and intelligent systems vol.22, pp.5, 2016, https://doi.org/10.12989/gae.2020.22.5.397
  79. Developing a hybrid adoptive neuro-fuzzy inference system in predicting safety of factors of slopes subjected to surface eco-protection techniques vol.36, pp.4, 2016, https://doi.org/10.1007/s00366-019-00768-3
  80. Development of a novel hybrid intelligent model for solving engineering problems using GS-GMDH algorithm vol.36, pp.4, 2016, https://doi.org/10.1007/s00366-019-00769-2
  81. The effects of ABC, ICA, and PSO optimization techniques on prediction of ripping production vol.36, pp.4, 2016, https://doi.org/10.1007/s00366-019-00770-9
  82. Developed comparative analysis of metaheuristic optimization algorithms for optimal active control of structures vol.36, pp.4, 2016, https://doi.org/10.1007/s00366-019-00780-7
  83. Developed comparative analysis of metaheuristic optimization algorithms for optimal active control of structures vol.36, pp.4, 2016, https://doi.org/10.1007/s00366-019-00780-7
  84. Project planning and risk management as a success factor for IT projects in agricultural schools in Serbia vol.63, pp.None, 2016, https://doi.org/10.1016/j.techsoc.2020.101371
  85. Influence of porosity and cement grade on concrete mechanical properties vol.10, pp.5, 2016, https://doi.org/10.12989/acc.2020.10.5.393
  86. Application of discrete element method (DEM) in characterization of bond-slip behavior in RC beams with confinement subjected to corrosion vol.28, pp.None, 2016, https://doi.org/10.1016/j.istruc.2020.10.026
  87. Prediction of total sediment load: A case study of Wadi Arbaat in eastern Sudan vol.26, pp.6, 2016, https://doi.org/10.12989/sss.2020.26.6.781
  88. Optimized AI controller for reinforced concrete frame structures under earthquake excitation vol.11, pp.1, 2021, https://doi.org/10.12989/acc.2021.11.1.001
  89. In-plane varying bending force effects on wave dispersion characteristics of single-layered graphene sheets vol.10, pp.2, 2021, https://doi.org/10.12989/anr.2021.10.2.101
  90. Ionic liquid coated magnetic core/shell CoFe2O4@SiO2 nanoparticles for the separation/analysis of trace gold in water sample vol.10, pp.3, 2016, https://doi.org/10.12989/anr.2021.10.3.295
  91. Optimization algorithms for composite beam as smart active control of structures using genetic algorithms vol.27, pp.6, 2016, https://doi.org/10.12989/sss.2021.27.6.1041
  92. Assessment of microstructure and surface effects on vibrational characteristics of public transportation vol.11, pp.1, 2021, https://doi.org/10.12989/anr.2021.11.1.101
  93. Smart estimation of automatic approach in enhancing the road safety under AASHTO Standard specification and STM vol.79, pp.3, 2021, https://doi.org/10.12989/sem.2021.79.3.389
  94. Application of multi-hybrid metaheuristic algorithm on prediction of split-tensile strength of shear connectors vol.28, pp.2, 2016, https://doi.org/10.12989/sss.2021.28.2.167
  95. Development of a Hybrid Artificial Neural Network-Particle Swarm Optimization Model for the Modelling of Traffic Flow of Vehicles at Signalized Road Intersections vol.11, pp.18, 2016, https://doi.org/10.3390/app11188387
  96. Analyzing shear strength of steel-concrete composite beam with angle connectors at elevated temperature using finite element method vol.40, pp.6, 2016, https://doi.org/10.12989/scs.2021.40.6.853
  97. Analyzing the energy performance of buildings by neuro-fuzzy logic based on different factors vol.23, pp.12, 2016, https://doi.org/10.1007/s10668-021-01382-4
  98. Evaluation and monitoring of impact resistance of fiber reinforced concrete by adaptive neuro fuzzy algorithm vol.34, pp.None, 2016, https://doi.org/10.1016/j.istruc.2021.09.072
  99. Adaptive neuro fuzzy evaluation of energy and non‐energy material productivity impact on sustainable development based on circular economy and gross domestic product vol.31, pp.1, 2016, https://doi.org/10.1002/bse.2878
  100. Application of ANFIS in the preparation of expert opinions and evaluation of building design variants in the context of processing large amounts of data vol.133, pp.None, 2016, https://doi.org/10.1016/j.autcon.2021.104045
  101. Engine performance fueled with jojoba biodiesel and enzymatic saccharification on the yield of glucose of microbial lipids biodiesel vol.239, pp.no.pd, 2016, https://doi.org/10.1016/j.energy.2021.122390
  102. Experimental and numerical studies on novel stiffener-enhanced steel-concrete-steel sandwich panels subjected to impact loading vol.45, pp.None, 2022, https://doi.org/10.1016/j.jobe.2021.103479
  103. Numerical and theoretical studies on shear behavior of steel-UHPC composite beams with waffle slab vol.47, pp.None, 2022, https://doi.org/10.1016/j.jobe.2021.103913