고속 PCB 임피던스측정 표준 개발과 연구 동향

  • Published : 2016.05.31

Abstract

Keywords

References

  1. 권재용, "전자파전력 측정 표준 개발과 연구 동향", 한국 전자파학회지 전자파기술, 24(3), pp. 3-11, 2013년 5월.
  2. 강진섭, 김정환, "Air Line 임피던스 표준을 이용한 동축 형 부하의 임피던스 정밀 측정", 한국전자파학회논문지, 11(5), pp. 788-795, 2000년 8월.
  3. 강진섭, 김정환, 조치현, 김대찬, "G-Band 도파관 산란 계수 정밀측정", 한국전자파학회논문지, 24(9), pp. 892-899, 2013년 9월. https://doi.org/10.5515/KJKIEES.2013.24.9.892
  4. N. M. Ridler, R. G. Clarke, M. J. Salter, and A. Wilson, "Traceability to national standards for S-parameter measurements in waveguide at frequencies from 220 GHz to 330 GHz", Proc. 78th ARFTG Microwave Measurement Conf., pp. 1-6, Dec. 2011.
  5. M. Horibe, R. Kishikawa, "Metrological traceability in waveguide S-parameter measurements at 1.0 THz band", IEEE Trans. Instrum. Meas., vol. 62, no. 6, pp. 1814-1820, Jun. 2013. https://doi.org/10.1109/TIM.2013.2240953
  6. M. Horibe, N. M. Ridler, "Traceability via precision dimensional measurements of WM-864 (WR-03) waveguide standard shims including comparison between NPL and NMIJ", Proc. 79th ARFTG Microw. Meas. Conf. Dig., pp. 1-8, 2012.
  7. "Test methods to determine the amount of signal loss on printed boards (PBs)", IPC-TM-650 Test Methods Manual Method 2.5.5.12, May 2009 (available for download from http://www.ipc.org/4.0_Knowledge/4.1_Standards/test/2-5_2- 5-5-12.pdf)
  8. 어영선, "밀리미터파 평판 전송로의 특성 평가 기술", 한국전자파학회지 전자파기술, 24(3), pp. 31-41, 2013년 5월.
  9. http://projects.npl.co.uk/hf-circuits/
  10. M. Salter, N. Ridler, Y.- P. Hong, D. Allal, F. Ziade, M, Hudlicka, and T. Pavicek, "A reference printed circuit board (PCB) for validating microwave measurements on PCBs and a differential calibration kit for traceable measurements", EUMW Workshops and Short Courses, 2015.
  11. Y.-P. Hong, "Fat dipole antenna with broadband balun using CPW-to-slotline field transformation", Electronics Letters, vol. 49, no. 10, pp. 635-636, May 2013. https://doi.org/10.1049/el.2012.3654
  12. Y.-P. Hong, Y.-J. An, and J.-G. Yook, "Differential radial power combiner using substrate integrated waveguide", Electronics Letters, vol. 46, no. 24, pp. 1607-1608, Nov. 2010. https://doi.org/10.1049/el.2010.8624
  13. Y.-P. Hong, D. F. Kimball, P. M. Asbeck, J.-G. Yook, and L. E. Larson, "Single-ended and differential radial power combiners implemented with a compact broadband probe", IEEE Transactions on Microwave Theory and Techniques, vol. 58, no. 6, pp. 1565- 1572, Jun. 2010. https://doi.org/10.1109/TMTT.2010.2049165
  14. J. J. Yan, Y.-P. Hong, K. Mukai, S. Shinjo, and P. M. Asbeck, "Broadband high PAE GaN push-pull power amplifier for 500 MHz to 2.5 GHz operation", IEEE MTT-S International Microwave Symposium, Jun. 2013.
  15. W. R. Eisenstant, B. Stengel, and B. M. Thompson, Microwave Differential Circuit Design Using Mixed-Mode SParameters, Artech House, 2006.
  16. 김유신, 이창석, "확장된 TRL 오차 수정 방법", 한국전자파학회논문지, 16(11), pp. 1099-1105, 2005년 11월.
  17. R. B. Marks, "A multiline method of network analyzer calibration", IEEE Trans. Microwave Theory Tech., 39, pp. 1205-1215, Jul. 1991. https://doi.org/10.1109/22.85388
  18. M. Wojnowski, V. Issakov, G. Sommer, and R. Weigel, "Multimode TRL calibration technique for characterization of differential devices", IEEE Trans. Microw. Theory Techn., vol. 60, no. 7, pp. 2220-2247, 2012. https://doi.org/10.1109/TMTT.2012.2193136
  19. A. G. Morgan, "A primary national standard impedance measurement system for the millimetre-wave frequency range", MSc dissertation, University of Surrey, Aug. 2007.
  20. G. F. Engen, C. A. Hoer, "Thru-reflect-line: An improved technique for calibrating the dual six-port automatic network analyzer", IEEE Transactions on Microwave Theory and Techniques, vol. 27, no. 12, pp. 987-993, Dec. 1979. https://doi.org/10.1109/TMTT.1979.1129778