DOI QR코드

DOI QR Code

Effect of Particle Characteristics and Temperature on Shear Yield Stress of Magnetorheological Fluid

  • Wu, Xiangfan (College of Mechanical and Electrical Engineering, China University of Mining and Technology) ;
  • Xiao, Xingming (College of Mechanical and Electrical Engineering, China University of Mining and Technology) ;
  • Tian, Zuzhi (College of Mechanical and Electrical Engineering, China University of Mining and Technology) ;
  • Chen, Fei (College of Mechanical and Electrical Engineering, China University of Mining and Technology) ;
  • Jian, Wang (College of Mechanical and Electrical Engineering, China University of Mining and Technology)
  • Received : 2016.03.11
  • Accepted : 2016.05.25
  • Published : 2016.06.30

Abstract

Aiming to improve the shear yield stress of magnetorheological fluid, magnetorheological fluids with different particle characteristics are prepared, and the influence rules of particle mass fraction, particle size, nanoparticles content and application temperature on shear yield stress are investigated. Experimental results indicate that shear yield stress increases approximate linearly with the enhancement of particle mass fraction. Particle size and the nanoparticles within 10% mass fraction can improve the shear yield stress effectively. When the application temperature is higher than $100^{\circ}C$, the shear yield stress decreases rapidly because of thermal expansion and thermal magnetization effect.

Keywords

References

  1. S. R. Agustin, F. Donado, and R. E. Rubio, J. Magn. Magn. Mater. 335, 149 (2013). https://doi.org/10.1016/j.jmmm.2013.02.017
  2. Y. H. Huang, Y. H. Jiang, X. B. Yang, and R. Z. Xu, J. Magn. 20, 317 (2015). https://doi.org/10.4283/JMAG.2015.20.3.317
  3. H. J. Kim, G. C. Kim, G. S. Lee, T. M. Hong, and H. J. Choi, J. Nanosci. Nanotechno, 13, 6005 (2013). https://doi.org/10.1166/jnn.2013.7655
  4. Z. Z. Tian, F. Chen, and D. M. Wang, J. Intell. Mater. Syst. Struct. 25, 1937 (2014). https://doi.org/10.1177/1045389X13512189
  5. O. Erol, B. Gonenc, D. Senkal, S. Alkan, and H. Gurocak, J. Intell. Mater. Syst. Struct. 23, 427 (2012). https://doi.org/10.1177/1045389X11435432
  6. G. A. Ewijk, G. J. Vroege, and A. P. Philipse, J. Magn. Magn. Mater. 201, 31 (1999). https://doi.org/10.1016/S0304-8853(99)00080-3
  7. X. B. Yang, Y. H. Jiang, Y. H. Huang, R. Z. Xu, H. G. Piao, G. M. Jia, and X. Y. Tan, J. Magn. 19, 345 (2014). https://doi.org/10.4283/JMAG.2014.19.4.345
  8. Z. Z. Tian, F. Chen, and D. M. Wang, J. Intell. Mater. Syst. Struct. 26, 414 (2015). https://doi.org/10.1177/1045389X14529027
  9. M. Ashtiani, S. H. Hashemabadi, and A. Ghaffari, J. Magn. Magn. Mater. 374, 716 (2015). https://doi.org/10.1016/j.jmmm.2014.09.020
  10. X. Tang and H. Conrad, J. Phys. D Appl. Phys. 33, 3026 (2000). https://doi.org/10.1088/0022-3727/33/23/304
  11. J. M. Ginder, L. C. Davis, and L. D. Elie, Int. J. Mod. Phys. B 10, 3293 (1996). https://doi.org/10.1142/S0217979296001744
  12. J. M. Ginder and L. C. Davis, Appl. Phys. Lett. 65, 3410 (1994). https://doi.org/10.1063/1.112408
  13. Y. M. Han, S. Kim, J. W. Kang, and S. B. Choi, Smart Mater. Struct. 24, 115016 (2015). https://doi.org/10.1088/0964-1726/24/11/115016
  14. A. Spaggiari and, E. Dragoni, J. Intell. Mater. Syst. Struct. 26, 1764 (2015). https://doi.org/10.1177/1045389X15571386
  15. D. M. Wang, B. Zi, Y. Zeng, Y. F. Hou, and Q. R. Meng, J. Mater. Sci. 49, 8459 (2014). https://doi.org/10.1007/s10853-014-8556-x
  16. H. Sahin, X. Wang, and F. Gordaninejad, J. Intell. Mater. Syst. Struct. 20, 2215 (2009). https://doi.org/10.1177/1045389X09351608

Cited by

  1. Constitutive models of magnetorheological fluids having temperature-dependent prediction parameter vol.27, pp.9, 2018, https://doi.org/10.1088/1361-665X/aac237
  2. Characteristics of Magnetorheological Fluids under New Formulation vol.47, pp.4, 2018, https://doi.org/10.1520/JTE20170477
  3. Magnetite Embedded Mini-Emulsion Polymerized Polystyrene Particles and Their Magnetorheology vol.26, pp.4, 2018, https://doi.org/10.1007/s13233-018-6048-5