DOI QR코드

DOI QR Code

A Study on The Performance of Ventilation and Maintaining Thermal Environment for a Combined Type Diffuser

급·배기 일체형 디퓨저의 환기 및 온열환경 유지성능에 대한 연구

  • Lim, Seok-Young (Department of Architectural Engineering, Graduate school, Hongik University) ;
  • Chang, Hyun-Jae (Department of Architectural Engineering, Hongik University)
  • 임석영 (홍익대학교 건축공학과 대학원) ;
  • 장현재 (홍익대학교 건축공학과)
  • Received : 2016.02.04
  • Accepted : 2016.05.23
  • Published : 2016.06.10

Abstract

Installing a ventilator for an apartment house composed of over 100 dwelling units was mandated in 2006 to improve indoor air quality. In the case of mechanical ventilators, the air change rate is kept stable, however 68% of dwellers do not operate their ventilator because of an increased electrical bill and noise. In the case of natural ventilators, the former problems are settled, but there are concerns about cold draught and an increase of heating/cooling cost. Authors are developing a heat recovery type natural ventilator which is a natural ventilator equipped with total heat recovery element, and it is expected that those problems of mechanical ventilator and natural ventilator are resolved by this. The combined type diffuser of this study is an under developed fit to the heat recovery type natural ventilator above. There are no standards to evaluate the performance for this type of diffuser. Due to this issue this study investigated the performance of the ventilation and maintained a thermal environment for the combined type diffuser by comparing it with existing diffusers. The results revealed that the performances of the combined type of diffusers showed different features from the existing ones, and was estimated to be high enough in the performances above.

Keywords

References

  1. Ministry of Land, Infrastructure and Transport, Law of building for facility, 2013, Article, 11.
  2. Park, J. S. and Kim, H. J., 2012, A field study of occupant behavior and energy consumption in apartments with mechanical ventilation, Energy and Building, Vol. 50, pp. 19-25. https://doi.org/10.1016/j.enbuild.2012.03.015
  3. Chang, H. J., 2014, Heat recovery type natural ventilator, kr patent 10-1447097.
  4. Cho, Y. J., Kang, S. Y. et al., 2004, ADPI Characteristics of Line Diffuser in a Room with Perimetric Heating Load, Proceeding of SAREK, Vol. 16, pp. 1204-1211.
  5. Liu, S. and Novoselac, A., 2015, Air Diffusion Performance Index (ADPI) of diffusers for heating mode, Building and Environment, Vol. 87, pp. 215-223. https://doi.org/10.1016/j.buildenv.2015.01.021
  6. Seok, H. T., Choi, D. H., Kim, H. J., and Yang, J. H., 2010, A Study on the Modeling and Analysis Method according to the Diffuser Shape, Journal AIK, Vol. 26, pp. 341-348.
  7. SPS-KARSE B 0008-170:2004, Diffuser Performance Testing method.
  8. KS B 6386:2011, Air Diffuser.
  9. ASHRAE, Handbook-HVAC Applications, Room air diffusion, This part is based on the findings as follows : Rydberg, J. and P. Norback, Air distribution and draft, 1949 ASHVE Transactions 55 : 225, Straub, H. E., S. F. Gilman, and S. Konzo, Distribution of air within a room for tear-round air conditioning-part 1, 1956, University of illinois Engineering Experiment Station bulletin, 435, and Straub, H. E., M. M. Chen, Distribution of air within a room for tear-round air conditioning-part 2, 1957, University of illinois Engineering Experiment Station bulletin, Vol. 442, pp. 57.5-57.10.
  10. KS A ISO 7730, 2010, Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria.
  11. ASHRAE, standard 55, 2009, Thermal Environmental conditions for human occupancy.
  12. Huang, Y. and Zhang, H., 1997, commercial heating and cooling loads component analysis, Energy analysis program, Vol. 7.
  13. Gwon, Y. H., 2009, Air conditioning system with Combined type equipment, kr patent 10-0905296.
  14. Chang, H. J., 2002, Effects of air-conditioning and interior of office on indoor environment air conditioned by hybrid system utilizing natural ventilation, Journal AIK, Vol. 18, pp. 223-230.
  15. ASHRAE, standard 113, 2009, Method of Testing for Room Air Diffusion.
  16. Park, S. I., Lee, S. H., and Park, H. S., 2002, Computer simulation on the Thermal Environment by Diffusion Angle of Packaged Type Air Conditioner in Classroom, Journal AIK, Vol. 18, pp. 243-250.
  17. Chang, H. J. and Lee, H. Y., 2012, A Study on the Improvement of Indoor Thermal and Air Environment Made by Ceiling Cassette Type Cooling and Heating Unit in Classrooms, Journal KSES, Vol. 32, pp. 141-148.
  18. REHVA, Ventilation Effectiveness Guidebook, Vol. 2, pp. 23-26.
  19. ASHRAE, Handbook-Fundamentals, Indoor environmental Health, pp. 10.1-10.9.