DOI QR코드

DOI QR Code

Fracture behavior of fly ash concrete containing silica fume

  • Zhang, Peng (School of Water Conservancy and Environment Engineering, Zhengzhou University) ;
  • Gao, Ji-Xiang (School of Water Conservancy and Environment Engineering, Zhengzhou University) ;
  • Dai, Xiao-Bing (School of Water Conservancy and Environment Engineering, Zhengzhou University) ;
  • Zhang, Tian-Hang (School of Water Conservancy and Environment Engineering, Zhengzhou University) ;
  • Wang, Juan (School of Water Conservancy and Environment Engineering, Zhengzhou University)
  • 투고 : 2015.04.27
  • 심사 : 2016.05.11
  • 발행 : 2016.07.25

초록

Effect of silica fume on fresh properties, compressive strength at 28 days and fracture behavior of fly ash concrete composite were studied in this paper. Test results indicated that the fluidity and flowability of fly ash concrete composites decreased and fly ash concrete composite are more cohesive and appear to be sticky with the addition of silica fume. Addition of silica fume was very effective in improving the compressive strength at 28 days of fly ash concrete composite, and the compressive strength of fly ash concrete composite has a trend of increase with the increase of silica fume content. Results also indicated that all the fracture parameters of effective crack length, fracture toughness, fracture energy, the critical crack opening displacement and the maximum crack opening displacement of fly ash concrete composite decreased with the addition of silica fume. When the content of silica fume increased from 3% to 12%, these fracture parameters decreased gradually with the increase of silica fume content. Furthermore, silica fume had great effect on the relational curves of the three-point bending beam specimen. As the silica fume content increased from 3% to 12%, the areas surrounded by the three relational curves and the axes were becoming smaller and smaller, which indicated that the capability of concrete composite containing fly ash to resist crack propagation was becoming weaker and weaker.

키워드

참고문헌

  1. Ahmaruzzaman, M. (2010), "A review on the utilization of fly ash", Prog. Energy Combust. Sci., 36(3), 327-363. https://doi.org/10.1016/j.pecs.2009.11.003
  2. Bagheri, A., Zanganeh, H., Alizadeh, H., Shakerinia, M. and Marian, M.A.S. (2013), "Comparing the performance of fine fly ash and silica fume in enhancing the properties of concretes containing fly ash", Constr. Build. Mater., 47, 1402-1408. https://doi.org/10.1016/j.conbuildmat.2013.06.037
  3. Barbhuiya, S.A., Gbagbo, J.K., Russell, M.I. and Basheer, P.A.M. (2009), "Properties of fly ash concrete modified with hydrated lime and silica fume", Constr. Build. Mater., 23, 3233-3239. https://doi.org/10.1016/j.conbuildmat.2009.06.001
  4. Blanco, F., Garcia, M.P., Ayala, J., Mayoral, G. and Garcia, M.A. (2006), "The effect of mechanically and chemically activated fly ashes on mortar properties", Fuel, 85, 2018-2026. https://doi.org/10.1016/j.fuel.2006.03.031
  5. Dilbas, H., Simsek, M. and Cakir, O. (2014), "An investigation on mechanical and physical properties of recycled aggregate concrete (RAC) with and without silica fume", Constr. Build. Mater., 61, 50-59. https://doi.org/10.1016/j.conbuildmat.2014.02.057
  6. Gao, D., Wang, Z., Qian, W. and Zhao, G. (2006), "Fracture energy and crack opening displacement of steel fiber reinforced high strength concrete", J. Chin. Ceram. Soc., 34(2), 192-198.
  7. Gao, D.Y. and Zhang, T.Y. (2007), "Fracture characteristics of steel fiber reinforced high strength concrete under three-point bending", J. Chin. Ceram. Soc., 35(12), 1630-1635.
  8. Golewski, G.L. and Sadowski, T. (2014), "An analysis of shear fracture toughness KIIc and microstructure in concretes containing fly-ash", Constr. Build. Mater., 51, 207-214. https://doi.org/10.1016/j.conbuildmat.2013.10.044
  9. Joshua, M., John, S. and Nilanjan, M. (2007), "Experimental testing to determine concrete fracture energy using simple laboratory test setup", ACI Mater. J., 104(6), 575-584.
  10. Lam, L., Wong, Y.L. and Poon, C.S. (1998), "Effect of fly ash and silica fume on compressive and fracture behaviors of concrete", Cement Concrete Res., 28(2), 271-283. https://doi.org/10.1016/S0008-8846(97)00269-X
  11. Li, Q., Sun, Z.H. and Zhang, H.Y. (2011), "Experiment about effect of fly ash and silicon fume on the strength of concrete", Concrete, 33(5), 77-79. (in Chinese)
  12. National Standard of the People's Republic of China (2005), "Test methods of cement and concrete for highway engineering", JTJ E30-2005, China Communications Press, Beijing. (in Chinese)
  13. Koksal, F., Altun, F., Yigit, L. and Sahin, Y. (2008), "Combined effect of silica fume and steel fiber on the mechanical properties of high strength concretes", Constr. Build. Mater., 22(8), 1874-1880. https://doi.org/10.1016/j.conbuildmat.2007.04.017
  14. Malhotra, V.M., Zhang, M.H., Read, P.H. and Ryell, J. (2000), "Long-term mechanical properties and durability characteristics of high-strength high-performance concrete incorporating supplementary cementing materials under outdoor exposure conditions", ACI Mater. J., 97, 518-525.
  15. Memon, F.A., Nuruddin, M.F. and Shafiq, N. (2013), "Effect of silica fume on the fresh and hardened properties of fly ash-based self-compacting geopolymer concrete", Int. J. Min. Met. Mater., 20(2), 205-213. https://doi.org/10.1007/s12613-013-0714-7
  16. Piratheepan, J., Gnanendran, C.T. and Arulrajah, A. (2012), "Determination of c and $\Phi$ from IDT and Unconfined Compression Testing and Numerical Analysis", J. Mater. Civ. Eng., 24(9), 1153-1164. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000493
  17. RILEM 50-FMC (1985), "Determination of fracture energy of mortar and concrete by means of three-point bend tests on notched beams", Mater. Struct., 18(4), 287-290. https://doi.org/10.1007/BF02472918
  18. Sarker, P.K., Haque, R. and Ramgolam, K.V. (2013), "Fracture behaviour of heat cured fly ash based geopolymer concrete", Mater. Des., 44, 580-586. https://doi.org/10.1016/j.matdes.2012.08.005
  19. Shah, S.P., Swartz, S.E. and Ouyang, C. (1995), Fracture Mechanics of Concrete: Applications of Fracture Mechanics to Concrete, Rock, and Other Quasi-Brittle Materials, John Wiley & Sons, New York.
  20. Swamy, R.N., Ali, A.R.S. and Theodorakopoulos, D.D. (1983), "Early strength fly ash concrete for structural applications", ACI Mater. J., 80, 414-423.
  21. Tanyildizi, H. (2013), "Variance analysis of crack characteristics of structural lightweight concrete containing silica fume exposed to high temperature", Constr. Build. Mater., 47, 1154-1159. https://doi.org/10.1016/j.conbuildmat.2013.05.060
  22. Xu, S.L. and Reinhardt, H.W. (2000), "A simplified method for determining double-K fracture parameters for three-point tests", Int. J. Fract., 104(2), 181-209. https://doi.org/10.1023/A:1007676716549
  23. Yu, Y.Z., Zhang, Y.M., Guo, G.L., Rao, B. and Zhou, J.C. (1987), "Study on fracture energy GF of concrete", Shuili Xuebao, 18(7), 300-307.
  24. Zhang, P., Li, Q. and Zhang, H. (2011a), "Combined effect of polypropylene fiber and silica fume on mechanical properties of concrete composite containing fly ash", J. Reinf. Plast. Compos., 30(16), 1851-1860.
  25. Zhang, P., Li, Q. and Sun, Z. (2011b), "Influence of silica fume and polypropylene fiber on fracture properties of concrete composite containing fly ash", J. Reinf. Plast. Compos., 30(24), 1977-1988. https://doi.org/10.1177/0731684411431358
  26. Zhang, P. and Li, Q. (2013a), "Effect of silica fume on durability of concrete composites containing fly ash", Sci. Eng. Compos. Mater., 20(1), 57-65.
  27. Zhang, P. and Li, Q. (2013b), "Durability of high performance concrete composites containing silica fume", Proc. Inst. Mech. Eng. Part L J. Mat. Des. Appl., 227(4), 343-349.
  28. Zhang, P. and Li, Q. (2013c), "Effect of polypropylene fiber on durability of concrete composite containing fly ash and silica fume", Compos. Part B: Eng., 45, 1587-1594. https://doi.org/10.1016/j.compositesb.2012.10.006
  29. Zhao, Z.F., Pang, B. and Zhao, Z.G. (2009a), "Fracture behaviors of dam and wet-screening concrete by direct tensile test", Key. Eng. Mat., 400-402, 233-238. https://doi.org/10.4028/www.scientific.net/KEM.400-402.233
  30. Zhao, Y.H., Yang, S.T., Han, F. and Chen, J. (2009b), "A model for fracture toughness prediction in compact tension specimen of concrete", Eng. Mech., 26(12), 127-132.
  31. Zhao, Y.H., Zhang, H. and Dong, W. (2010), "Determination of fracture parameters for non-standard wedge splitting specimen of concrete", Key. Eng. Mat., 452-453, 425-428. https://doi.org/10.4028/www.scientific.net/KEM.452-453.425

피인용 문헌

  1. Effect of Silica Fume and Siliceous Fly Ash Addition on the Fracture Toughness of Plain Concrete in Mode I vol.416, pp.1757-899X, 2018, https://doi.org/10.1088/1757-899X/416/1/012065
  2. Potential of siliceous fly ash and silica fume as a substitute for binder in cementitious concretes vol.49, pp.2267-1242, 2018, https://doi.org/10.1051/e3sconf/20184900030
  3. Using AP2RC & P1RB micro-silica gels to improve concrete strength and study of resulting contamination vol.4, pp.3, 2016, https://doi.org/10.12989/acc.2016.4.3.195
  4. Determination of fracture toughness in concretes containing siliceous fly ash during mode III loading vol.62, pp.1, 2017, https://doi.org/10.12989/sem.2017.62.1.001
  5. Influence of nano-silica on the failure mechanism of concrete specimens vol.19, pp.4, 2016, https://doi.org/10.12989/cac.2017.19.4.429
  6. Effect of pozzolans on mechanical behavior of recycled refractory brick concrete in fire vol.72, pp.3, 2016, https://doi.org/10.12989/sem.2019.72.3.339
  7. Monitoring of fracture propagation in brittle materials using acoustic emission techniques-A review vol.25, pp.1, 2020, https://doi.org/10.12989/cac.2020.25.1.015
  8. Influence of coarse aggregate properties on specific fracture energy of steel fiber reinforced self compacting concrete vol.9, pp.2, 2016, https://doi.org/10.12989/acc.2020.9.2.173
  9. Energy Savings Associated with the Use of Fly Ash and Nanoadditives in the Cement Composition vol.13, pp.9, 2020, https://doi.org/10.3390/en13092184
  10. Nanoparticle-reinforced building materials with applications in civil engineering vol.12, pp.10, 2016, https://doi.org/10.1177/1687814020965438
  11. Effect of medium coarse aggregate on fracture properties of ultra high strength concrete vol.77, pp.1, 2016, https://doi.org/10.12989/sem.2021.77.1.103
  12. Influence of pre-compression on crack propagation in steel fiber reinforced concrete vol.11, pp.3, 2021, https://doi.org/10.12989/acc.2021.11.3.261
  13. Experimental Evaluation of Untreated and Pretreated Crumb Rubber Used in Concrete vol.11, pp.5, 2021, https://doi.org/10.3390/cryst11050558
  14. Validation of the favorable quantity of fly ash in concrete and analysis of crack propagation and its length – Using the crack tip tracking (CTT) method – In the fracture toughness examina vol.296, pp.None, 2021, https://doi.org/10.1016/j.conbuildmat.2021.122362