반도체디스플레이기술학회지 (Journal of the Semiconductor & Display Technology)

한국반도체디스플레이기술학회 (The Korean Society Of Semiconductor & Display Technology)
권호 표지

기판온도에 따른 IGZO 박막의 구조적 및 전기적 특성

Structural and Electrical Characteristics of IGZO thin Films deposited at Different Substrate Temperature

  • 이민규 (한국기술교육대학교 신소재공학과) ;
  • 이규만 (한국기술교육대학교 신소재공학과)
  • Lee, Mingyu (Dept. of Materials Engineering, Korea University of Technology and Education) ;
  • Lee, Kyu Mann (Dept. of Materials Engineering, Korea University of Technology and Education)
  • 투고 : 2016.01.05
  • 심사 : 2016.02.29
  • 발행 : 2016.03.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, we have investigated the effect of the substrate temperature on the characteristics of IGZO thin films for the TCO(transparent conducting oxide). For this purpose, IGZO thin films were deposited by RF magnetron sputtering at various substrate temperature (room temperature ${\sim}400^{\circ}C$). IGZO thin films deposited at room temperature show amorphous structure, whereas IGZO thin films deposited at $250^{\circ}C$ or more show crystalline structure having an (222) preferential orientation. The electrical resistivity of IGZO film increased with increasing temperature. The change of electrical resistivity with increasing temperature was mainly interpreted in terms of the charge carrier concentration rather than the charge carrier mobility. The electrical resistivity of the amorphous-IGZO films deposited at R.T. was lower than that of the crystalline-IGZO thin films deposited at $300^{\circ}C$. The transmittance of the IGZO films deposited at $300^{\circ}C$ was decreased deposited with hydrogen gas.

키워드

참고문헌

  1. K. Ishibashi, K. Hirata, and N. Hosokawa, "Mass spectrometric ion analysis in the sputtering of oxide targets", Journal of Vacuum Science & Technology A., 10, pp.1718 (1992). https://doi.org/10.1116/1.577776
  2. K. Tominaga, T. Ueda, T. Ao, M. Kataoka, and I. Mori, "ITO films prepared by facing target sputtering system", Thin Solid Films, 281-282, pp. 194 (1996). https://doi.org/10.1016/0040-6090(96)08611-7
  3. Y. Hoshi, H. Kato, and K. Funatsu, "ITO films deposited by facing target sputtering", Thin Solid Films, 445, pp. 245 (2003). https://doi.org/10.1016/S0040-6090(03)01182-9
  4. N. Taga, M. Maekawa, Y. Shigesato, I. Yasui, M. Kamei and T. E. Haynes, "Deposition of Heteroepitaxial $In_2O_3$ Thin Films by Molecular Beam Epitaxy", Jpn. J. Appl.Phys., 37, pp. 6524 (1998) https://doi.org/10.1143/JJAP.37.6524
  5. C. Nunes de Carvalho, A. M. Botelho do Rego, A. Amaral, P. Brogueira and G. Lavareda, "Effect of substrate temperature on the surface structure, composition and morphology of indium-tin oxide films", Surface and Coatings Technology, 124, 70 (2000). https://doi.org/10.1016/S0257-8972(99)00619-2
  6. Takafumi Aoi, Nobuto Oka, Yasushi Sato, Ryo Hayashi, Hideya Kumomi and Yuzo Shigesato. "DC sputter deposition of amorphous indium-galliumzinc- oxide(a-IGZO) films with $H_2O$ introduction", Thin Solid Films, 518, pp. 3004 (2010) https://doi.org/10.1016/j.tsf.2009.09.176
  7. H. Hosono, "Ionic amorphous oxide semiconductors: Material design, carrier transport, and device application", Journal of non-crystalline solids, 352, pp. 851 (2002).
  8. K. Nomura, T. Kamita and H. Hosono, "Effects of diffusion of hydrogen and oxygen on electrical properties of amorphous oxide semiconductor, In-Ga-Zn-O", ECS J Solid State Sci. Technol. 2, p. 5 (2013) https://doi.org/10.1149/2.025310jss
  9. K. Nomura, H. Ohta, A. Takagi, T. Kamiya, M. Hirano, and H. Hosono, "Room-temperature fabrication of transparent flexible thin-film transistors using amorphous oxide semiconductors," Nature, 432, no. 7016, pp. 488 (2004) https://doi.org/10.1038/nature03090