증착 온도 및 수소 유량에 따른 IGZO 박막의 구조적 및 전기적 특성

Structural and Electrical Characteristics of IGZO Thin Films Deposited at Different Substrate Temperature and Hydrogen Flow Rate

  • 박수진 (한국기술교육대학교 에너지신소재화학공학부) ;
  • 이규만 (한국기술교육대학교 에너지신소재화학공학부)
  • Park, Su Jin (Dept. of Materials Engineering, Korea University of Technology and Education) ;
  • Lee, Kyu Mann (Dept. of Materials Engineering, Korea University of Technology and Education)
  • 투고 : 2016.11.22
  • 심사 : 2016.12.26
  • 발행 : 2016.12.31

초록

In this study, we have investigated the effect of the substrate temperature and hydrogen flow rate on the characteristics of IGZO thin films for the TCO(transparent conducting oxide). For this purpose, IGZO thin films were deposited by RF magnetron sputtering at room temperature and $300^{\circ}C$ with various $H_2$ flow rate. In order to investigate the influences of the hydrogen, the flow rate of hydrogen in argon mixing gas has been changed from 0.1sccm to 1.0sccm. IGZO thin films deposited at room temperature show amorphous structure, whereas IGZO thin films deposited at $300^{\circ}C$ show crystalline structure having an (222) preferential orientation. The electrical resistivity of the amorphous-IGZO films deposited at R.T. was lower than that of the crystalline-IGZO thin films deposited at $300^{\circ}C$. The increase of electrical resistivity with increasing substrate temperature was interpreted in terms of the decrease of the charge carrier mobility. The transmittance of the IGZO films deposited at $300^{\circ}C$ was decreased deposited with hydrogen gas.

키워드

참고문헌

  1. K. Ishibashi, K. Hirata, and N. Hosokawa, "Mass spectrometric ion analysis in the sputtering of oxide targets", Journal of Vacuum Science & Technology A., 10, pp.1718 (1992). https://doi.org/10.1116/1.577776
  2. K. Tominaga, T. Ueda, T. Ao, M. Kataoka, and I. Mori, "ITO films prepared by facing target sputtering system", Thin Solid Films, 281-282, pp. 194 (1996). https://doi.org/10.1016/0040-6090(96)08611-7
  3. Y. Hoshi, H. Kato, and K. Funatsu, "ITO films deposited by facing target sputtering", Thin Solid Films, 445, pp. 245 (2003). https://doi.org/10.1016/S0040-6090(03)01182-9
  4. S. H. Han and K. M. Lee, "Structural and Electrical Characteristics of IZO Thin Films Deposited at Different Substrate Temperature and Hydrogen Flow Rate", Journal of the Semiconductor & Display Technology, 12. pp. 33 (2013).
  5. N. Taga, M. Maekawa, Y. Shigesato, I. Yasui, M. Kamei and T. E. Haynes, "Deposition of Heteroepitaxial $In_2O_3$ Thin Films by Molecular Beam Epitaxy", Jpn. J. Appl.Phys., 37, pp.6524 (1998). https://doi.org/10.1143/JJAP.37.6524
  6. C. Nunes de Carvalho, A. M. Botelho do Rego, A. Amaral, P. Brogueira and G. Lavareda, "Effect of substrate temperature on the surface structure, composition and morphology of indium-tin oxide films", Surface and Coatings Technology, 124, 70 (2000). https://doi.org/10.1016/S0257-8972(99)00619-2
  7. Takafumi Aoi, Nobuto Oka, Yasushi Sato, Ryo Hayashi, Hideya Kumomi and Yuzo Shigesato. "DC sputter deposition of amorphous indium-gallium-zinc-oxide(a-IGZO) films with $H_2O$ introduction", Thin Solid Films, 518, pp3004 (2010). https://doi.org/10.1016/j.tsf.2009.09.176
  8. H. Hosono, "Ionic amorphous oxide semiconductors: Material design, carrier transport, and device application", Journal of non-crystalline solids, 352, pp.851 (2002).
  9. K. Nomura, T. Kamita and H. Hosono, "Effects of diffusion of hydrogen and oxygen on electrical properties of amorphous oxide semiconductor, In-Ga-Zn-O", ECS J Solid State Sci. Technol. 2, p5 (2013). https://doi.org/10.1149/2.025310jss
  10. S. I. Jun, Timothy E. Mcknight, Michael L. Simpson, and Philip D. Rack, " A statistical parameter study of indium tin oxide thin films deposited by radio-frequency sputtering", Thin Solid Films, 476, pp.59 (2005). https://doi.org/10.1016/j.tsf.2004.09.011