Journal of Institute of Control, Robotics and Systems (제어로봇시스템학회논문지)

Institute of Control, Robotics and Systems (제어로봇시스템학회)
권호 표지
DOI QR코드

DOI QR Code

Inspection of Diamond Wheel through Boundary Detection and Processing

경계 추출 및 처리를 통한 다이아몬드 휠 검사

  • Ha, Jong-Eun (Department of Mechanical and Automotive Engineering, Seoul National University of Science and Technology)
  • 하종은 (서울과학기술대학교 기계.자동차공학과)
  • Received : 2016.07.27
  • Accepted : 2016.09.30
  • Published : 2016.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, we present a method for the inspection of diamond wheels. In total, six items, including height, radius, and angle, need to be checked during the manufacturing of a diamond wheel. Automatic inspection through image processing is presented in this paper. First, a contour corresponding to the boundary of the diamond wheel is extracted from an image. Next, control points are selected by processing the contour. Seven control points are detected and used for the computation of the required item. Detailed procedures for the computation of the height, radius, and angle using control points are presented in this paper. Experimental results show the feasibility of the presented method.

Keywords

References

  1. H. S. Kim, K. J. Lee, D. Y. Jung, Y. H. Lee, J. H. Park, and G. S. Kim, "Design for a defective product inspection device for the curved glass used in smart-phones," Journal of Institute of Control, Robotics and Systems (in Korean), vol. 21, no. 8, pp. 794-800, 2015. https://doi.org/10.5302/J.ICROS.2015.15.0049
  2. D. W. Shin, B. J. Jin, and J. K. Yoon, "Inspection system of electric vehicle battery plate using image processing," Journal of Institute of Control, Robotics and Systems (in Korean), vol. 20, no. 6, pp. 718-723, 2014. https://doi.org/10.5302/J.ICROS.2014.13.1982
  3. G. S. Kim, S. Lee, and J. S. Cho, "A learning-based visual inspection system for part verification in a panorama sunroof assembly line using the SVM algorithm," Journal of Institute of Control, Robotics and Systems (in Korean), vol. 19, no. 12, pp. 1099-1104, 2013. https://doi.org/10.5302/J.ICROS.2013.13.9041
  4. K. M. Huh, S. M. Kang, and S. H. Park, "Automatic visual inspection system of remocon using camera," Journal of Institute of Control, Robotics and Systems (in Korean), vol. 13, no. 11, pp. 1106-1111, 2007. https://doi.org/10.5302/J.ICROS.2007.13.11.1106
  5. C. H. Park, B. R. Lee, S. Y. Yang, K. K. Ahn, and H. O. Oh, "Development of pipe fault inspection system using computer vision," Journal of Institute of Control, Robotics and Systems (in Korean), vol. 9, no. 10, pp. 822-831, 2003. https://doi.org/10.5302/J.ICROS.2003.9.10.822
  6. J. Canny, "A Computational approach to edge detection," IEEE Trans. on Pattern Analysis and Machine Intelligence, vol. 8, no. 6, pp. 679-798, 1986.
  7. R. Y. Tsai, "A versatile camera calibration techniques for highaccuracy 3D machine vision metrology using off-the-shelf TV cameras and lenses," IEEE Journal of Robotics and Automation, pp. 323-344, 1987.