Computers and Concrete

  • 제17권6호
  • /
  • Pages.815-829
  • /
  • 2016
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Effect of the PC, diatomite and zeolite on the performance of concrete composites

  • Kocak, Yilmaz (Department of Construction, Kutahya Vocational School of Technical Sciences, Dumlupinar University) ;
  • Savas, Muhsin (Department of Construction, Institute of Sciences, Duzce University)
  • 투고 : 2015.05.12
  • 심사 : 2016.03.08
  • 발행 : 2016.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

This study has been carried out to investigate the effect of the surface properties of Portland cement, diatomite and zeolite on the performance of concrete composites. In this context, to describe the materials used in this study and determine the properties of them, chemical, physical, mineralogical, molecular, thermal, and zeta potential analysis have been applied. In the study, reference (Portland cement), 10%-20% diatomite, 10%-20% zeolite, 5+5%-10+10% diatomite and zeolite were substituted for Portland cement, a total of 7 different cements were obtained. Ultrasonic pulse velocity, capillary water absorption and compressive strength tests were performed on the hardened concrete specimens. Hardened concrete tests have been done on seven different types of concrete, for 28, 56 and 90 days. As a result of experiments it has been identified that both the zeolite and diatomite substitution has a positive effect on the performance of concrete.

키워드

과제정보

연구 과제 주관 기관 : Duzce University

참고문헌

  1. Aruntas, H.Y. and Tokyay, M. (1996), "The use of diatomite as pozzolanic material in blended cement production", Cement Concrete World, 1(4), 3-41.
  2. ASTM C 618-85. (1985), Standard specifications for fly ash and raw or calcined natural pozzolan for use as mineral admixture in Portland cement concrete, ASTM, Philadelphia, USA. 827
  3. Yilmaz Kocak and Muhsin Savas Canpolat, F. (2002), "Utilization of natural zeolite and industrial waste in improving cement performance in cement production", Doctorate Thesis, Suleyman Demirel University, Graduate School of Science, Engineering and Technology; Sakarya (in Turkey).
  4. Erdogan, T.Y. (2010), Concrete, Metu Press Publishing Company ; Ankara, Turkey.
  5. Gabrovsek, R., Vuk, T. and Kaucic, V. (2006), "Evaluation of the hydration of Portland cement containing various carbonates by means of thermal analysis", Acta Chim. Slov, 53, 159-165.
  6. Gerengi, H., Kocak, Y., Jazdzewska, A., Kurtay, M. and Durgun, H. (2013), "Electrochemical investigations on the corrosion behaviour of reinforcing steel in diatomite-and zeolite-containing concrete exposed to sulphuric acid", Constr. Build. Mater., 49, 471-477. https://doi.org/10.1016/j.conbuildmat.2013.08.033
  7. Gerengi, H., Kurtay, M. and Durgun, H. (2015), "The effect of zeolite and diatomite on the corrosion of reinforcement steel in 1M HCl solution", Result. Phys., 5, 148-153. https://doi.org/10.1016/j.rinp.2015.05.003
  8. Ghrici, M., Kenai, S. and Said-Mansour, M. (2007), "Mechanical properties and durability of mortar and concrete containing natural pozzolana and limestone blended cements", Cement Concrete Compos., 29(7), 542-549. https://doi.org/10.1016/j.cemconcomp.2007.04.009
  9. Gomes, C.E.M., Ferreira, O.P. and Fernandes, M.R. (2005), "Influence of vinyl acetate-versatic vinylester copolymer on the microstructural characteristics of cement pastes", Mater. Res., 8(1), 51-56. https://doi.org/10.1590/S1516-14392005000100010
  10. Goni, S., Frias, M., de la Villa, R.V. and Garcia, R. (2013), "Sodium chloride effect on durability of ternary blended cement. Microstructural characterization and strength", Compos. Part B: Eng., 54, 163-168. https://doi.org/10.1016/j.compositesb.2013.05.002
  11. Govin, A., Peschard, A. and Guyonnet, R. (2006), "Modification of cement hydration at early ages by natural and heated wood", Cement Concrete Compos., 28(1), 12-20. https://doi.org/10.1016/j.cemconcomp.2005.09.002
  12. Jia, Y., Han, W., Xiong, G. and Yang, W. (2008), "A method for diatomite zeolitization through steam-assisted crystallization with in-situ seeding", Mater. lett., 62(16), 2400-2403. https://doi.org/10.1016/j.matlet.2007.12.005
  13. Jozic, D. and Zelic, J. (2006), "The effect of fly ash on cement hydration in aqueous suspensions", Ceramics-Silikaty, 50(2), 98-105.
  14. Karakaya, M.C. (2006), Properties of clay minerals and identification methods, Bizim Buro Press Publishing Company; Ankara, Turkey.
  15. Kelestemur, O. (2010), "Utilization of waste vehicle tires in concrete and its effect on the corrosion behavior of reinforcing steels", Int. J. Min., Metallurgy Mater., 17(3), 363-370. https://doi.org/10.1007/s12613-010-0319-3
  16. Kelestemur, O. and Demirel, B. (2010), "Corrosion behavior of reinforcing steel embedded in concrete produced with finely ground pumice and silica fume", Constr. Build. Mater., 24, 1898-1905. https://doi.org/10.1016/j.conbuildmat.2010.04.013
  17. Kocak, Y., Tasci, E. and Kaya, U. (2013), "The effect of using natural zeolite on the properties and hydration characteristics of blended cements", Constr. Build. Mater., 47, 720-727. https://doi.org/10.1016/j.conbuildmat.2013.05.033
  18. Mozgawa, W. (2001), "The relation between structure and vibrational spectra of natural zeolites", J. Mol. Struct., 596(1), 129-137. https://doi.org/10.1016/S0022-2860(01)00741-4
  19. Nachbaur, L., Nkinamubanzi, P.C., Nonat, A. and Mutin, J.C. (1998), "Electrokinetic properties which control the coagulation of silicate cement suspensions during early age hydration", J. Colloid Interf. Sci., 202(2), 261-268. https://doi.org/10.1006/jcis.1998.5445
  20. Pan, Z., Cheng, L., Lu, Y. and Yang, N. (2002), "Hydration products of alkali-activated slag-red mud cementitious material", Cement Concrete Res., 32, 357-362. https://doi.org/10.1016/S0008-8846(01)00683-4
  21. Perraki, T. and Orfanoudaki, A. (2004), "Mineralogical study of zeolites from Pentalofos area, Thrace, Greece", Appl. Clay Sci., 25(1), 9-16. https://doi.org/10.1016/S0169-1317(03)00156-X
  22. Serbest, D. (1999), "The use of natural zeolites in the industry of the light construction", Master's Thesis, Anadolu University, Graduate School of Science, Engineering and Technology; Eskisehir (in Turkey).
  23. Siddique, R. and Kadri, E.H. (2011), "Effect of metakaolin and foundry sand on the near surface characteristics of concrete", Constr. Build. Mater., 25(8), 3257-3266. https://doi.org/10.1016/j.conbuildmat.2011.03.012
  24. Skripkiunas, G., Sasnauskas, V., Dauksys, M. and Palubinskaite, D. (2007), "Peculiarities of hydration of cement paste with addition of hydrosodalite", Mater. Sci.-Poland, 25(3), 627-635.
  25. Sprynskyy, M., Kovalchuk, I. and Buszewski, B. (2010), "The separation of uranium ions by natural and modified diatomite from aqueous solution", J. Hazard. Mater., 181(1), 700-707. https://doi.org/10.1016/j.jhazmat.2010.05.069
  26. Termkhajornkit, P. and Nawa, T. (2004), "The fluidity of fly ash-cement paste containing naphthalene sulfonate superplasticizer", Cement Concrete Res., 34(6), 1017-1024. https://doi.org/10.1016/j.cemconres.2003.11.017
  27. Topcu, I.B., Bilir, T. and Uygunoglu, T. (2009), "Effect of waste marble dust content as filler on properties of self-compacting concrete", Constr. Build. Mater., 23(5), 1947-1953. https://doi.org/10.1016/j.conbuildmat.2008.09.007
  28. TS 802. (2009), Design of concrete mixes, Turkish Standards, Ankara (in Turkey).
  29. TS EN 12350-2 (2010), Testing fresh concrete-Part 2: Slump test, Turkish Standards, Ankara (in Turkey).
  30. TS EN 12390-3 (2003), Testing hardened concrete-Part 3: Compressive strength of test specimens, Turkish Standards, Ankara (in Turkey).
  31. Varela, M.B., Ramirez, S.M., Erena, I., Gener, M. and Carmona, P. (2006), "Characterization and pozzolanicity of zeolitic rocks from two Cuban deposits", Appl. Clay Sci., 33(2), 149-159. https://doi.org/10.1016/j.clay.2006.04.006
  32. Viallis-Terrisse, H., Nonat, A. and Petit, J.C. (2001), "Zeta-potential study of calcium silicate hydrates interacting with alkaline cations", J. Colloid Interf. Sci., 244(1), 58-65. https://doi.org/10.1006/jcis.2001.7897
  33. Wang, X.Y., Cho, H.K. and Lee, H.S. (2011), "Prediction of temperature distribution in concrete incorporating fly ash or slag using a hydration model", Compos. Part B: Eng., 42(1), 27-40. https://doi.org/10.1016/j.compositesb.2010.09.017
  34. Yildiz, K., Dorum, A. and Kocak, Y. (2010), "The investigation of the effect of minerological molecular electrokinetical and thermal compliance of pumice, zeolite and CEM I cement on high strength concrete", Journal of the Faculty of Engineering and Architecture of Gazi University, 25 (4), 867-879.
  35. Yildiz, K., Dorum, A. and Kocak, Y. (2010), "The investigation of the effect of minerological molecular electrokinetical and thermal compliance of pumice, zeolite and CEM I cement on high strength concrete", J. Fac. Eng. Archit. Gazi Univ., 25(4), 867-879.
  36. Yoshioka, K., Tazawa, E.I., Kawai, K. and Enohata, T. (2002), "Adsorption characteristics of superplasticizers on cement component minerals", Cement Concrete Res., 32(10), 1507-1513. https://doi.org/10.1016/S0008-8846(02)00782-2

피인용 문헌

  1. Corrosion behavior of concrete produced with diatomite and zeolite exposed to chlorides vol.19, pp.2, 2016, https://doi.org/10.12989/cac.2017.19.2.161
  2. Il’insky diatomite in building ceramics production vol.451, pp.None, 2018, https://doi.org/10.1088/1757-899x/451/1/012030
  3. Influence of calcined diatomite content and elevated temperatures on the properties of high strength mortars produced with basalt sand vol.22, pp.suppl1, 2016, https://doi.org/10.1002/suco.202000063