Computers and Concrete

  • 제17권6호
  • /
  • Pages.739-760
  • /
  • 2016
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Analysis of punching shear in high strength RC panels-experiments, comparison with codes and FEM results

  • Shuraim, Ahmed B. (Civil Engineering Department, College of Engineering, King Saud University) ;
  • Aslam, Fahid (Civil Engineering Department, College of Engineering, King Saud University) ;
  • Hussain, Raja R. (Civil Engineering Department, College of Engineering, King Saud University) ;
  • Alhozaimy, Abdulrahman M. (Civil Engineering Department, College of Engineering, King Saud University)
  • 투고 : 2015.09.04
  • 심사 : 2016.03.08
  • 발행 : 2016.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper reports on punching shear behavior of reinforced concrete panels, investigated experimentally and through finite element simulation. The aim of the study was to examine the punching shear of high strength concrete panels incorporating different types of aggregate and silica fume, in order to assess the validity of the existing code models with respect to the role of compressive and tensile strength of high strength concrete. The variables in concrete mix design include three types of coarse aggregates and three water-cementitious ratios, and ten-percent replacement of silica fume. The experimental results were compared with the results produced by empirical prediction equations of a number of widely used codes of practice. The prediction of the punching shear capacity of high strength concrete using the equations listed in this study, pointed to a potential unsafe design in some of them. This may be a reflection of the overestimation of the contribution of compressive strength and the negligence of the role of flexural reinforcement. The overall findings clearly indicated that the extrapolation of the relationships that were developed for normal strength concrete are not valid for high strength concrete within the scope of this study and that finite element simulation can provide a better alternative to empirical code Equations.

키워드

참고문헌

  1. ABAQUS (2009), Users manuals and theory manual version 6.10, Hibbitt, Karlsson & Sorensen, Inc., Pawtucket, RI, USA.
  2. ACI 211.4R (2008), Guide for selecting proportions for high-strength concrete using portland cement and other cementitious materials, American Concrete Institute; Farmington Hills, MI, USA.
  3. ACI 212.3R (2010), Report on chemical admixture for concrete, American Concrete Institute; Farmington Hills, MI, USA.
  4. ACI 234R-06 (2012), Guide for the Use of silica fume in concrete, American Concrete Institute; Farmington Hills, MI, USA.
  5. ACI 318M-11 (2011), Building code requirements for structural concrete and commentary, American Concrete Institute, Farmington Hills, MI, USA.
  6. ACI 363R-10 (2010), State-of-the-art report on high strength report, American Concrete Institute; Farmington Hills, MI, USA.
  7. ACI 446(1997), Finite element analysis of fracture in concrete structures: State-of-the-Art (ACI 446.3R-97), American Concrete Institute; Farmington Hills, MI, USA.
  8. ACI-ASCE Committee 326 (1962), "Shear and diagonal tension," ACI J., 59(1), 1-30.
  9. ACI-ASCE Committee 426 (1987), The shear strength of reinforced concrete members, Part 4 of ACI Manual of Concrete Practice, ACI; Farmington Hills, MI, USA.
  10. ACI-ASCE Committee 445 1998), "Recent approaches to shear design of structural concrete", J. Struct. Eng., 124(12), 1375-1417. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:12(1375)
  11. Ahmed, F.R. and Al Numan, B.S. (2014), "Failure characteristics and critical punching perimeter of High strength concrete panels", Int. J. Eng. Trend. Tech., 13(8).
  12. Ahmed, S.H. (1981), "Properties of confined concrete subjected to static and dynamic loading", Ph.D.Thesis, University of Illinois at Chicago, USA.
  13. Jahangir Alam, A.K.M., Amanat, K.M. and Seraj, S.M. (2009), "Experimental investigation of edge restraint on punching shear behaviour of RC slabs", IES J. Part A: Civil Struct. Eng., 2(1), 35-46. https://doi.org/10.1080/19373260802449537
  14. Albrecht, U. (2002), "Design of flat slabs for punching-European and North American practices", Cement Concrete Compos., 24(6), 531-538. https://doi.org/10.1016/S0958-9465(01)00069-5
  15. Bazant, Z.P. and Zhiping, C. (1987), "Size effect in punching shear failure of slabs", ACI Struct. J., 84(1), 44-53.
  16. Belytschko, T. and Black, T. (1999), "Elastic crack growth in finite elements with minimal remeshing", Int. J. Numer. Method. Eng., 45(5), 601-620. https://doi.org/10.1002/(SICI)1097-0207(19990620)45:5<601::AID-NME598>3.0.CO;2-S
  17. BS 8110-97(1997), Structural use of concrete, part 1: code of practice for design and construction, British Standards Institution, London, UK.
  18. Carreira, D.J. and Kuang-Han, C. (1986), "Stress-strain relationship for reinforced concrete in tension", ACI J., 83(3), 21-28.
  19. CEB-FIP MC90(1993), Design of concrete structures-CEB-FIP Model Code 1990, Thomas Telford, London, UK.
  20. Chen, W.F. and Da-Jian, H. (1988), Plasticity for structural engineers, Springer-Verlag, New York, USA.
  21. CSA A23.3-04(2004), Design of concrete structures, Canadian Standards Association, Rexdale, ON, Canada, 358.
  22. de Borst, R. (2002), "Fracture in quasi-brittle materials: a review of continuum damage-based approaches", Eng. Fract. Mech., 69(2), 95-112. https://doi.org/10.1016/S0013-7944(01)00082-0
  23. DIN 1045-1(2007), Plain, reinforced and prestressed concrete structures-part 1: design and construction, Normenausschuss Bauwesen (NABau) im DIN Deutsches Institut fur Normung e.V.Beuth Verl.Berlin.
  24. Eurocode 2(2004), Design of concrete structures, part 1-1: general rules and rules for buildings (EN1992-1-1), European Committee for Standardization, Brussels, Belgium.
  25. Fib Bulletin 42(2008), "Constitutive modelling of high strength / high performance concrete, State-of-art report", International Federation for Structural Concrete (fib), Lausanne, Switzerland.
  26. FIB Bulletin No.12 (2001), Punching of structural concrete slabs, fib Bulletin 12, Lausanne, Switzerland.
  27. Gardner, N.J. (1990), "Relationship of the punching shear capacity of reinforced concrete slab with concrete strength", ACI Struct. J., 87(1), 66-71.
  28. Gardner, N.J. (2005), "ACI 318-05, CSA A23.3-04, Eurocode 2 (2003), DIN 1045-1 (2001), BS 8110-97 and CEB-FIP MC 90 Provisions for Punching Shear of Reinforced Concrete Flat Slabs" ACI Special Publication, SP-232, 1-22.
  29. Gardner, N.J. (2011), "Verification of punching shear provisions for reinforced concrete flat slabs", ACI Struct. J., 108(5), 572-581.
  30. Ghannoum, C.M. (1998), "Effect of high strength concrete on the performance of the column-slab specimens", MSc. Thesis, McGill University, Canada.
  31. Genikomsou, A.S. and Maria, A.P. (2015), "Finite element analysis of punching shear of concrete slabs using damaged plasticity model in ABAQUS", Eng. Struct., 98, 38-48. https://doi.org/10.1016/j.engstruct.2015.04.016
  32. Hassan, A.M.T., Mahmud, G.H., Jones, S.W. and Whitford, C. (2015), "A new test method for investigating punching shear strength in Ultra High Performance Fibre Reinforced Concrete (UHPFRC) slabs", Compos. Struct., 131, 832-841. https://doi.org/10.1016/j.compstruct.2015.06.044
  33. Hallgren, M. and Kinnunen, S. (1996), "Increase of punching shear capacity by using high-strength concrete", Proceedings of the 4th International Symposium On Utilization of High-strength/ High-performance Concrete, Paris, May.
  34. Herzog, M. (1970), "A new evaluation of earlier punching shear tests", Concrete, 4(12), 448-450.
  35. Hillerborg, A. (1985a), "The theoretical basis of a method to determine the fracture energy GF of concrete", Mater. Struct., 18(4), 291-296. https://doi.org/10.1007/BF02472919
  36. Hillerborg, A. (1985b), "Results of three comparative test series for determining the fracture energy GF of concrete", Mater. Struct., 18(5), 407-413. https://doi.org/10.1007/BF02472416
  37. Kuang, J.S. and Morley, C.T. (1992), "Punching shear behavior of restrained reinforced concrete slabs", ACI Struct. J., 89(1), 13-19.
  38. Kurtoglu, E.A., Abdulkadir, C., Hasan, M.A., Mehmet, E.G. and Mahmut, B. (2016), "Reliability-based modeling of punching shear capacity of FRP-reinforced two-way slabs", Comput. Concrete, 17(1), 87-106. https://doi.org/10.12989/cac.2016.17.1.087
  39. Lee, J. and Gregory L.F. (1998), "Plastic-damage model for cyclic loading of concrete structures", J. Eng. Mech., 124(8), 892-900. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:8(892)
  40. Lubliner, J., J. Oliver, S. Oller and E. Onate (1989), "A Plastic-damage model for concrete", Int. J. Solid. Struct., 25(3), 229-326.
  41. Marzouk, H. and Hussein, A. (1992), "Experimental investigation on the behavior of high-strength concrete slabs", ACI Struct. J., 88(6), 701-713.
  42. Menetrey, P. (2002), "Synthesis of punching failure in reinforced concrete", Cement Concrete Compos., 24(6), 497-507. https://doi.org/10.1016/S0958-9465(01)00066-X
  43. Menetrey, P., Walther, R., Zimmermann, T., William, K.J. and Regan, P.E. (1997), "Simulation of punching failure in reinforced-concrete structures", J. Struct. Eng., 123(5), 652-658. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:5(652)
  44. Metwally, I.M., Issa, M.S. and El-Betar, S.A. (2008), "Punching shear resistance of normal and high-strength reinforced concrete flat slabs", Civil Eng. Res. Mag., 30(3), 982-1004.
  45. Meyer, C. and Okamura, H. (1986), "Finite element analysis of reinforced concrete structures", Proceedings Of The Seminar Sponsored By The Japan Society For The Promotion Of Science And The U.S. National Science Foundation, Tokyo, May.
  46. Moe, J. (1961), "Shearing strength of reinforced concrete slabs and footings under concentrated loads", Bulletin D47, Portland cement association, Research and Development Laboratories.
  47. Murthy, R.C., Palani, G.S. and Nagesh, R.I. (2009), "State-of-the-art review on fracture analysis of concrete structural components", Sadhana, 34(2), 345-367. https://doi.org/10.1007/s12046-009-0014-0
  48. Muttoni, A. (2008), "Punching shear strength of reinforced concrete slabs without transverse reinforcement", ACI Struct. J., 105(4), 440-450.
  49. Ngo, D.T. (2001), "Punching shear resistance of high-strength concrete slabs", Electr. J. Struct. Eng., 1(1), 52-59.
  50. Polak, M.A. (1998), "Modelling punching shear of reinforce concrete slabs using layered finite elements", ACI Struct. J., 95(1),71-80.
  51. Reis, N., de Brito, J., Correia, J.R. and Arruda, M.R. (2015), "Punching behaviour of concrete slabs incorporating coarse recycled concrete aggregates", Eng. Struct., 100, 238-248. https://doi.org/10.1016/j.engstruct.2015.06.011
  52. Sain, T. and Kishen, J.M.C. (2007), "Energy-based equivalence between damage and fracture in concrete under fatigue", Eng. Fract. Mech., 74(15), 2320-2333. https://doi.org/10.1016/j.engfracmech.2006.11.014
  53. Salim, W. and Sebastian, W.M. (2003), "Punching shear failure in reinforced concrete slabs with compressive membrane action", ACI Struct. J., 100(4), 471-479.
  54. Schnobrich, W.C. (1985), "The role of finite element analysis of reinforced concrete structures", Proceedings of the Seminar Sponsored by the Japan Society for the Promotion of Science and the U.S.National Science Foundation, Tokyo, Japan.
  55. Sengul, O., Tasdemir, C. and Tasdemir, M.A. (2002), "Influence of aggregate type on mechanical behavior of normal-and high-strength concretes", Mater. J., 99(6), 528-533.
  56. Shuraim, A.B. (2006), "Three-dimensional non-linear modelling aspects of a full-scale reinforced concrete banded-joist floor", Proceedings of the Eighth International Conference on Computational Structures Technology, Civil-Comp Press, Stirlingshire, September.
  57. Shuraim, A.B. (2012), "Numerical forensic model for the diagnosis of a full-scale RC floor", Latin American J. Solid. Struct., 9(2), 1-19.
  58. Simone, A., Wells, G.N. and Sluys, L.J. (2003), "From continuous to discontinuous failure in a gradient-enhanced continuum damage model", Comput. Method. Appl. Mech. Eng., 192(41), 4581-4607. https://doi.org/10.1016/S0045-7825(03)00428-6
  59. Smadi, M.M. and Yasin, I.B. (2008), "Behavior of high-strength fibrous concrete slab-column connections under gravity and lateral loads", Constr. Build. Mater., 22(8), 1863-1873. https://doi.org/10.1016/j.conbuildmat.2007.04.023
  60. Subramanian, N. (2003), "Shear strength of high strength concrete beams: Review of the codal provisions", The Ind. Concrete J., 77(5), 1090-1094.
  61. Vecchio, F.J. (2001), "Non-linear finite element analysis of reinforced concrete: at the crossroads", Struct. Concrete, 2(4), 201-212. https://doi.org/10.1680/stco.2001.2.4.201
  62. Vecchio, F.J., Bentz, E.C. and Collins, M.P. (2004), "Tools for forensic analysis of concrete structures", Comput. Concrete, 1(1), 1-14. https://doi.org/10.12989/cac.2004.1.1.001
  63. Wosatko, A., Pamin, J. and Polak, M.A. (2015), "Application of damage-plasticity models in finite element analysis of punching shear", Comput. Struct., 151, 73-85. https://doi.org/10.1016/j.compstruc.2015.01.008
  64. Yamada, T., Nanni, A. and Endo, K. (1992), "Punching shear resistance of flat slabs: Influence of reinforcement type and ratio", ACI Struct. J., 89(5), 555-563.

피인용 문헌

  1. Numerical study on effect of integrity reinforcement on punching shear of flat plate vol.20, pp.6, 2016, https://doi.org/10.12989/cac.2017.20.6.731
  2. Investigation of the model scale and particle size effects on the point load index and tensile strength of concrete using particle flow code vol.66, pp.4, 2016, https://doi.org/10.12989/sem.2018.66.4.445
  3. Simulation of crack initiation and propagation in three point bending test using PFC2D vol.66, pp.4, 2016, https://doi.org/10.12989/sem.2018.66.4.453
  4. Simulation of the tensile failure behaviour of transversally bedding layers using PFC2D vol.67, pp.5, 2016, https://doi.org/10.12989/sem.2018.67.5.493
  5. Investigation of the effects of particle size and model scale on the UCS and shear strength of concrete using PFC2D vol.67, pp.5, 2016, https://doi.org/10.12989/sem.2018.67.5.505
  6. The effect of ball size on the hollow center cracked disc (HCCD) in Brazilian test vol.22, pp.4, 2016, https://doi.org/10.12989/cac.2018.22.4.373
  7. Numerical simulation of shear mechanism of concrete specimens containing two coplanar flaws under biaxial loading vol.22, pp.4, 2018, https://doi.org/10.12989/sss.2018.22.4.459
  8. PFC3D simulation of the effect of particle size on the single edge-notched rectangle bar in bending test vol.68, pp.4, 2016, https://doi.org/10.12989/sem.2018.68.4.497
  9. Numerical simulation of the effect of bedding layer geometrical properties on the shear failure mechanism using PFC3D vol.22, pp.5, 2016, https://doi.org/10.12989/sss.2018.22.5.611
  10. Effect of transversely bedding layer on the biaxial failure mechanism of brittle materials vol.69, pp.1, 2016, https://doi.org/10.12989/sem.2019.69.1.011
  11. Numerical simulation of the effect of bedding layer on the tensile failure mechanism of rock using PFC2D vol.69, pp.1, 2019, https://doi.org/10.12989/sem.2019.69.1.043
  12. Numerical simulations of fracture shear test in anisotropy rocks with bedding layers vol.7, pp.4, 2016, https://doi.org/10.12989/acc.2019.7.4.241
  13. Experimental investigating the properties of fiber reinforced concrete by combining different fibers vol.25, pp.6, 2020, https://doi.org/10.12989/cac.2020.25.6.509