DOI QR코드

DOI QR Code

Experimental study on shear capacity of SRC joints with different arrangement and sizes of cross-shaped steel in column

  • Wang, Qiuwei (College of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Shi, Qingxuan (College of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Tian, Hehe (College of Civil Engineering, Xi'an University of Architecture and Technology)
  • 투고 : 2015.10.08
  • 심사 : 2016.03.28
  • 발행 : 2016.06.10

초록

The seismic performance of the ordinary steel reinforced concrete (SRC) columns has no significant improvement compared to the reinforced concrete (RC) columns mainly because I, H or core cross-shaped steel cannot provide sufficient confinement for core concrete. Two improved SRC columns by constructing with new-type shaped steel were put forward on this background, and they were named as enlarging cross-shaped steel and diagonal cross-shaped steel for short. The seismic behavior and carrying capacity of new-type SRC columns have been researched theoretically and experimentally, while the shear behavior remains unclear when the new-type columns are joined onto SRC beams. This paper presents an experimental study to investigate the shear capacity of new-type SRC joints. For this purpose, four new-type and one ordinary SRC joints under low reversed cyclic loading were tested, and the failure patterns, load-displacement hysteretic curves, joint shear deformation and steel strain were also observed. The ultimate shear force of joint specimens was calculated according to the beam-end counterforce, and effects of steel shape, load angel and structural measures on shear capacity of joints were analyzed. The test results indicate that: (1) the new-type SRC joints display shear failure pattern and has higher shear capacity than the ordinary one; (2) the oblique specimens have good bearing capacity if designed reasonably; and (3) the two proposed construction measures have little effect on the shear capacity of SRC joints embedded with diagonal cross-shaped steel. Based on the mechanism observed from the test, the formulas for calculating ultimate shear capacity considering the main factors (steel web, stirrup and axial compression ratio) were derived, and the calculated results agreed well with the experimental and simulated data.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. Chen, C.H., Wang, C.K. and Sun, H.Z. (2014), "Experimental study on seismic behavior of full encased steel-concrete composite columns", J. Struct. Eng., 140(6), 1-10.
  2. Chen, Z.P., Xu, J.J., Chen, Y.L. and Xue, J.Y. (2015), "Seismic behavior of steel reinforced concrete (SRC) T-shaped column-beam planar and 3D hybrid joints under cyclic loads", Earthq. Struct., 8(3), 555-572. https://doi.org/10.12989/eas.2015.8.3.555
  3. Chou, C.C. and Uang, C.M. (2007), "Effects of continuity plate and transverse reinforcement on cyclic behavior of SRC moment connections", J. Struct. Eng., 133(1), 96-104. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:1(96)
  4. de Sousa, B.M.J. Jr. and Caldas, R.B. (2005), "Numerical analysis of composite steel-concrete column of arbitrary cross section", J. Struct. Eng., 131(11), 1721-1730. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:11(1721)
  5. Design code (2001), Technical specification for steel reinforced concrete, JGJ138-2001, Beijing, China.
  6. Design code (2010), Code for design of concrete structures, GB50010-2010, Beijing, China.
  7. Fan, J.S., Li, Q.W., Nie, J.G. and Zhou, H. (2014), "Experimental study on the seismic performance of 3D joints between concrete-filled square steel tubular columns and composite beams", J. Struct. Eng., 140(12), 1-13.
  8. Gan, D., Guo, L.H., Liu, J.P. and Zhou, X.H. (2011), "Seismic behavior and moment strength of tubed steel reinforced-concrete (SRC) beam-columns", J. Construct. Steel Res., 67(10), 1516-1524. https://doi.org/10.1016/j.jcsr.2011.03.025
  9. Guo, Z.X., Lin, H. and Liu, Y. (2010), "Experimental study on seismic behavior of SRC columns with different stirrup configuration", J. Build. Struct., 31(4), 110-115. [In Chinese]
  10. Jia, J.Q., Zhu, W.Q. and Wang, J.Z. (2013), "Shear strength of interior steel reinforced high strength concrete beam-column joints", China Civ. Eng. J., 46(10), 1-8. [In Chinese]
  11. Jiang, R. and Jia, J.Q. (2007), "Seismic ductility of very-high strength-concrete short columns subject to combined axial loading and cyclic lateral loading", J. Chongqing Univ. (English Ed.), 6(3), 205-212.
  12. Karimi, K., El-Dakhakhni, W. and Tait, M. (2012), "Behavior of slender steel-concrete composite columns wrapped with FRP jackets", J. Perform. Construct. Facil., 26(5), 590-599. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000280
  13. Kim, S.H., Jung, C.Y. and Ann, J.H. (2011), "Ultimate strength of composite structure with different degrees of shear connection", Steel Compos. Struct., Int. J., 11(5), 375-390. https://doi.org/10.12989/scs.2011.11.5.375
  14. Lu, X.L., Yin, X.W. and Jiang, H.J. (2014), "Experimental study on hysteretic properties of SRC columns with high steel ratio", Steel Compos. Struct., Int. J., 17(3), 287-303. https://doi.org/10.12989/scs.2014.17.3.287
  15. Ma, H.W., Jiang, W.S. and Cho, C.D. (2011), "Experimental study on two types of new beam-to-column connections", Steel Compos. Struct., Int. J., 11(4), 291-305. https://doi.org/10.12989/scs.2011.11.4.291
  16. Nishiyama, I., Fujimoto, T., Fukumoto, T. and Yoshioka, K. (2004), "Inelastic force-deformation response of joint shear panels in beam-column moment connections to concrete-filled tubes", J. Struct. Eng., 130(2), 244-252. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(244)
  17. Shim, C.S., Chung, Y.S. and Han, J.H. (2008), "Cyclic response of concrete-encased composite columns with low steel ratio", Proceedings of the Institution of Civil Engineers: Struct. Build., 161(2), 77-89.
  18. Tian, H.H. (2015), "Research on seismic behavior and shear capacity of SRC beam-column joints", Ph.D. Dissertation; Xi'an University of Architecture and Technology, Xi'an, China. [In Chinese]
  19. Wang, T.C., Zhang, X.H., Zhao, H.L. and Qi, J.W. (2010), "Experimental research on seismic behavior of exterior joints with specially shaped columns reinforced by fiber", Indus. Construct., 40(1), 46-50.
  20. Wang, Q.W., Shi, Q.X., Jiang, W.S., Zhang, X.H., Hou, W. and Tian, Y. (2013), "Experimental study on seismic behavior of steel reinforced concrete columns with new-type cross sections", J. Build. Struct., 34(8), 18-24. [In Chinese]
  21. Xue, J.Y., Liu Y., Zhao, H.T. and Chen, Z.P. (2011), "Experimental study of the bearing capacity of steel reinforced concrete specially-shaped column-beam joint", China Civ. Eng. J., 44(5), 41-48. [In Chinese]
  22. Yan, C.W. and Jia, J.Q. (2010), "Seismic performance of steel reinforced ultra high-strength concrete composite frame joints", Earthq. Eng. Eng. & Vib., 9(3), 439-448. https://doi.org/10.1007/s11803-010-0027-z
  23. Yasuo, T., Kaneko, Y. and Yashiro, H. (2000), "Strengthing of reinforced concrete columns by central reinforcing steel element", Proceedings of 12th World Conference on Earthquake Engineering, Auckland, New Zealand, January.
  24. Yasushi, N., Shigeyuki, T. and Nozomu, B. (2004), "Flexural behavior of steel reinforced concrete columns with T-shaped steel", Proceedings of 13th World Conference on Earthquake Engineering, Vancouver, BC, Canada, August.
  25. Zhang, S.A., Zhao, Z.Z. and He, X.Q. (2012), "Flexural behavior of SRC columns under axial and bilateral loading", Appl. Mech. Mater., 166, 3383-3390.

피인용 문헌

  1. Seismic Behavior of Bolted Endplate Connection Between Steel Reinforced Concrete (SRC) Wall and SRC Beam for Use in High-Rise Buildings vol.16, pp.11, 2016, https://doi.org/10.1007/s40999-018-0296-x
  2. Experimental investigation on shear capacity of partially prefabricated steel reinforced concrete columns vol.28, pp.1, 2018, https://doi.org/10.12989/scs.2018.28.1.073
  3. Cyclic behaviour of concrete encased steel (CES) column-steel beam joints with concrete slabs vol.29, pp.6, 2018, https://doi.org/10.12989/scs.2018.29.6.735
  4. The Composite Steel Reinforced Concrete Column Under Axial and Seismic Loads: A Review vol.19, pp.6, 2016, https://doi.org/10.1007/s13296-019-00257-9
  5. Shear Bearing Capacity of Framework Joints of Steel-Reinforced Concrete-Filled Circular Steel Tube vol.2020, pp.None, 2020, https://doi.org/10.1155/2020/7324865
  6. Study on shear capacity of prestressed composite joints with concrete-encased CFST columns vol.24, pp.11, 2021, https://doi.org/10.1177/13694332211000558
  7. Study on seismic performance of SRC leaning beam-column exterior joints in the main workshop of CAP1400 nuclear power plant vol.34, pp.None, 2021, https://doi.org/10.1016/j.istruc.2021.09.002
  8. Effect of concrete confinement level on load-bearing capacity of steel-reinforced concrete (SRC) columns under eccentric loading: Experiment and FEA model vol.35, pp.None, 2022, https://doi.org/10.1016/j.istruc.2021.10.094
  9. Steel-concrete composite beam-column connections utilizing prefabricated permanent steel form vol.46, pp.None, 2016, https://doi.org/10.1016/j.jobe.2021.103836