Steel and Composite Structures

  • 제21권2호
  • /
  • Pages.249-266
  • /
  • 2016
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A modal approach for the efficient analysis of a bionic multi-layer sound absorption structure

  • Wang, Yonghua (College of Mechanical and Electric Engineering, Changchun University of Science and Technology) ;
  • Xu, Chengyu (College of Mechanical and Electric Engineering, Changchun University of Science and Technology) ;
  • Wan, Yanling (College of Mechanical and Electric Engineering, Changchun University of Science and Technology) ;
  • Li, Jing (College of Mechanical and Electric Engineering, Changchun University of Science and Technology) ;
  • Yu, Huadong (College of Mechanical and Electric Engineering, Changchun University of Science and Technology) ;
  • Ren, Luquan (Key Laboratory of Bionic Engineering (Ministry of Education), Jilin University)
  • 투고 : 2015.09.10
  • 심사 : 2016.03.18
  • 발행 : 2016.06.10
⟨ 이전 논문 다음 논문 ⟩

초록

The interest of this article lies in the proposition of using bionic method to develop a new sound absorber and analyze the efficient of this absorber in a ski cabin. Inspired by the coupling absorption structure of the skin and feather of a typical silent flying bird - owl, a bionic coupling multi-layer structure model is developed, which is composed of a micro-silt plate, porous fibrous material and a flexible micro-perforated membrane backed with airspace. The finite element simulation method with ACTRAN is applied to calculate the acoustic performance of the multi-layer absorber, the vibration modal of the ski cabin and the sound pressure level (SPL) near the skier's ears before and after pasting the absorber at the flour carpet and seats in the cabin. As expected, the SPL near the ears was significantly reduced after adding sound-absorbing material. Among them, the model 2 and model 5 showed the best sound absorption efficiency and the SPL almost reduced 5 dB. Moreover, it was most effctive for the SPL reduction with full admittance configuration at both the carpet and the seats, and the carpet contribution seems to be predominant.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China, Jilin provincial science and technology department

참고문헌

  1. Actran/TRIM 2016 Users' guide (2016), Free Field Technologies SA, Mont-Saint-Guibert, Belgium.
  2. Bahramgiri, M., Besmi, M.R., Babaei, M. and Sahebazamani, M. (2006), "A new structure of stator pole to reduce torque ripple and acoustic noise in switched reluctance motor", Proceedings of the XVIIth International Conference on Electrical Machines, Chania, Greece, September.
  3. Bathe, K.J. (2006), Finite Element Procedures, Klaus-Jurgen Bathe.
  4. Becot, F.X. and Sgard, F. (2006), "On the use of poroelastic materials for the control of the sound radiated by a cavity backed plate", J. Acoust. Soc. Am., 120(4), 2055-2066. https://doi.org/10.1121/1.2214134
  5. Coyette, J.P., Lielens, G., Van den Nieuwenhof, B., Bertolini, C., Gaudino, C., Misaji, K. and Ide, F. (2007), "From body in white to trimmed body models in the low frequency range: A new modeling approach (No. 2007-01-2340)", SAE Technical Paper.
  6. d'Udekem, D., Acher, F., Khatib-Shahidi, B., Shu, K.T., Rabbani, H. and Liu, W. (2008), "Efficient analysis of a fully-trimmed car body using modal approaches", INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Vol. 2008, No. 1, Dearborn, MI, USA, July, pp. 187-195.
  7. Du, G.H., Zhu, Z.M. and Gong, X.F. (2001), Acoustic Foundation, (Second Edition), Nanjing University Press, China.
  8. Feng, L., Li, S., Li, Y., Li, H., Zhang, L., Zhai, J., Song, Y., Liu, B., Jiang, L. and Zhu, D. (2002), "Super-hydrophobic surfaces: From natural to artificial", Adv. Mater., 14(24), 1857-1860. https://doi.org/10.1002/adma.200290020
  9. Graham, R.R. (1934), "The silent flight of owls", J. Royal Aeronaut. Soc., 38, 837-843. https://doi.org/10.1017/S0368393100109915
  10. Guilloteau, A., Guillemain, P. and Kergomard, J. (2014), "Dependence of the acoustic power produced by a woodwind on the tonehole size", Proceedings of International Symposium on Musical Acoustics, Le Mans, France, July, pp. 241-245.
  11. Guo, Z., Liu, W. and Su, B.L. (2011), "Superhydrophobic surfaces: From natural to biomimetic to functional", J. Colloid Interf. Sci., 353(2), 335-355. https://doi.org/10.1016/j.jcis.2010.08.047
  12. Han, Z., Niu, S., Shang, C., Liu, Z. and Ren, L. (2012), "Light trapping structures in wing scales of butterfly Trogonoptera brookiana", Nanoscale, 4(9), 2879-2883. https://doi.org/10.1039/c2nr12059c
  13. Huang, S., Aydin, M. and Lipo, T.A. (2001), "Electromagnetic vibration and noise assessment for surface mounted PM machines", Power Engineering Society Summer Meeting, Volume 3, Vancouver, BC, Canada, July, pp. 1417-1426.
  14. Kang, J. and Fuchs, H.V. (1999), "Predicting the absorption of open weave textiles and micro-perforated membranes backed by an air space", J. Sound Vib., 220(5), 905-920. https://doi.org/10.1006/jsvi.1998.1977
  15. Kroeger, R.A., Grushka, H.D. and Helvey, T.C. (1972), "Low Speed Aero-Dynamics for Ultra-Quiet Flight", Technical Report AFFDL-TR-71-75; Air Force Flight Dynamics Lab, Wright-Patterson Air Force Base, OH, USA.
  16. Kuo, S.M., Kong, X. and Gan, W.S. (2003), "Applications of adaptive feedback active noise control system", IEEE T. Contr. Syst. Technol., 11(2), 216-220. https://doi.org/10.1109/TCST.2003.809252
  17. Lee, F.C. and Chen, W.H. (2001), "Acoustic transmission analysis of multi-layer absorbers", J. Sound Vib., 248(4), 621-634. https://doi.org/10.1006/jsvi.2001.3825
  18. Lee, S.H., Hong, J.P., Hwang, S.M., Lee, W.T., Lee, J.Y. and Kim, Y.K. (2009), "Optimal design for noise reduction in interior permanent-magnet motor", IEEE T. Ind. Appl., 45(6), 1954-1960. https://doi.org/10.1109/TIA.2009.2031905
  19. Lielens, G., Van Den Nieuwenhof, B., Acher, F. and Coyette, J.P. (2008), "An energy-based updated modal approach for the efficient analysis of large trimmed models", J. Acous. Soc. Am., 123(5), 3869.
  20. Lilley, G.M. (1998), "A study of the silent flight of the owl", AIAA Paper, 2340(1998), l-6.
  21. Lilley, G.M. (2004), "A quest for quiet commercial passenger transport aircraft for take-off and landing", AIAA Paper, 2922(10).
  22. Liu, T.S., Kuykendoll, K., Rhew, R. and Jones, S. (2004), "Avian wings", AIAA Paper, p. AIAA-2004-2186.
  23. Maa, D.Y. (2000), "Theory of microslit absorbers", Acta Acustica, 25(6), 481-485.
  24. Miki, Y. (1990), "Acoustical properties of porous materials. Modifications of Delany-Bazley models", J. Acoust. Soc. Japan (E), 11(1), 19-24. https://doi.org/10.1250/ast.11.19
  25. Ojeda, X., Mininger, X., Ben Ahmed, H., Gabsi, M. and Lecrivain, M. (2009), "Piezoelectric actuator design and placement for switched reluctance motors active damping", IEEE T. Energy Conver., 24(2), 305-313. https://doi.org/10.1109/TEC.2009.2016146
  26. Ren, L.Q., Tong, J., Li, J.Q. and Chen, B.C. (2001), "SW-Soil and Water: Soil adhesion and biomimetics of soil-engaging components: A review", J. Agr. Eng. Res., 79(3), 239-263. https://doi.org/10.1006/jaer.2001.0722
  27. Riley, C.M., Lin, B.K., Habetler, T.G. and Kliman, G.B. (1999), "Stator current harmonics and their causal vibrations: A preliminary investigation of sensorless vibration monitoring applications", IEEE T. Ind. Appl., 35(1), 94-99. https://doi.org/10.1109/28.740850
  28. Sgard, F.C., Atalla, N. and Nicolas, J. (2000), "A numerical model for the low frequency diffuse field sound transmission loss of double-wall sound barriers with elastic porous linings", J. Acoust. Soc. Am., 108(6), 2865-2872. https://doi.org/10.1121/1.1322022
  29. Sun, S.M., Ren, L.Q. and Xun, C.Y. (2008), "Research on coupling sound absorption property of owl skin and feather", Noise Vib. Control, 6, 119-123. [In Chinese]
  30. Van den Nieuwenhof, B., Lielens, G. and Coyette, J.P. (2008), "An updated modal approach for dealing with vibro-acoustic damped models under random excitation", INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Vol. 2008, No. 1, Dearborn, MI, USA, July, pp. 196-204.
  31. Ver, I.L. and Beranek, L.L. (2008), Noise and Vibration Control Engineering, Principles and Applications, (Second Edition), New York, NY, USA.
  32. Wang, Y., Zhang, C., Ren, L., Ichchou, M., Galland, M.A. and Bareille, O. (2014), "Sound absorption of a new bionic multi-layer absorber", Compos. Struct., 108, 400-408. https://doi.org/10.1016/j.compstruct.2013.09.029
  33. Xue, C., Chen, S., Zhang, W., Zhang, B., Zhang, G. and Qiao, H. (2007), "Design, fabrication, and preliminary characterization of a novel MEMS bionic vector hydrophone", Microelectr. J., 38(10), 1021-1026. https://doi.org/10.1016/j.mejo.2007.09.008

피인용 문헌

  1. Aluminum and E-glass epoxy plates behavior subjected to shock loading vol.6, pp.2, 2017, https://doi.org/10.12989/amr.2017.6.2.155