International Journal of Naval Architecture and Ocean Engineering

  • 제8권3호
  • /
  • Pages.262-276
  • /
  • 2016
  • /
  • 2092-6782(pISSN)
  • /
  • 2092-6790(eISSN)
대한조선학회 (The Society of Naval Architects of Korea)
권호 표지
DOI QR코드

DOI QR Code

Use of hazardous event frequency to evaluate safety integrity level of subsea blowout preventer

  • Chung, Soyeon (Department of Naval Architecture and Ocean Engineering, Seoul National University) ;
  • Kim, Sunghee (Advanced Technology Institute, Hyundai Heavy Industries Co Ltd.) ;
  • Yang, Youngsoon (Department of Naval Architecture and Ocean Engineering & Research Institute of Marine Systems Engineering, Seoul National University)
  • 투고 : 2015.08.10
  • 심사 : 2016.02.11
  • 발행 : 2016.05.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Generally, the Safety Integrity Level (SIL) of a subsea Blowout Preventer (BOP) is evaluated by determining the Probability of Failure on Demand (PFD), a low demand mode evaluation indicator. However, some SIL results are above the PFD's effective area despite the subsea BOP's demand rate being within the PFD's effective range. Determining a Hazardous Event Frequency (HEF) that can cover all demand rates could be useful when establishing the effective BOP SIL. This study focused on subsea BOP functions that follow guideline 070 of the Norwegian Oil and Gas. Events that control subsea well kicks are defined. The HEF of each BOP function is analyzed and compared with the PFD by investigating the frequency for each event and the demand rate for the components. In addition, risk control options related to PFD and HEF improvements are compared, and the effectiveness of HEF as a SIL verification for subsea BOP is assessed.

키워드

참고문헌

  1. Bukowski, J., 2006. Incorporating process demand into models for assessment of safety system performance. In: Proceedings of RAMS'06 Symposium. Alexandria, VI, USA.
  2. Cai, B., Liu, Y., Liu, Z., Tian, X., Zhang, Y., Liu, J., 2012a. Performance evaluation of subsea blowout preventer systems with common-cause failures. J. Pet. Sci. Eng. 90-91, 18-25. https://doi.org/10.1016/j.petrol.2012.04.007
  3. Cai, B., Liu, Y., Liu, Z., Tian, X., Li, H., Ren, C., 2012b. Reliability analysis of subsea blowout preventer control systems subjected to multiple error shocks. J. Loss Prev. Process Industries 25, 1044-1054. https://doi.org/10.1016/j.jlp.2012.07.014
  4. Holand, P., 2001. Deepwater Kick and BOP Performance. Sintef report STF38 A01419. Sintef, Trondheim.
  5. Hauge, S., Habrekke, S., Krakenes, T., Lundteigen, M.A., Merz, M., 2012. Barriers to Prevent and Limit Acute Release to Sea. Sintef report A22763. Sintef, Trondheim.
  6. Hauge, S., Lundteigen, M.A., Hokstad, P., Habrekke, S., 2010. Reliability Prediction Method for Safety Instrumented Systems. Sintef, Trondheim.
  7. Hauge, S., Hokstad, P., Habrekke, S., Lundteigen, M.A., 2015. Common cause failures in safety-instrumented systems: using field experience from the petroleum industry. Reliab. Eng. Syst. Saf. http://dx.doi.org/10.1016/j.ress. 2015.09.018.
  8. Hauge, S., Onshus, T., 2010. Reliability Data for Safety Instrumented Systems. Sintef, Trondheim.
  9. IEC 61508, 1997. Functional Safety of Electrical/Electronic/Programmable Electronic: Safety-related System. International Electrotechnical Commission, Geneva.
  10. IEC 61508, 2010. Functional Safety of Electrical/Electronic/Programmable Electronic: Safety-related System. International Electrotechnical Commission, Geneva.
  11. Innal, F., Dutuit, Y., Rauzy, A., Signoret, J., 2010. New insight into the average probability of failure on demand and the probability of dangerous failure per hour of safety instrumented systems. J. Risk Reliab. 224, 75-86.
  12. Jin, H., Lundteigen, M.A., Rausand, M., 2011. Reliability performance of safety instrumented systems: a common approach for both low- and highdemand mode of operation. Reliab. Eng. Syst. Saf. 96, 365-373. https://doi.org/10.1016/j.ress.2010.11.007
  13. Kim, S., Chung, S., Yang, Y., 2014. Availability analysis of subsea blowout preventer using Markov model considering demand rate. Int. J. Nav. Archit. Ocean Eng. 6-4, 775-787.
  14. Liu, Y., Rausand, M., 2011. Reliability assessment of safety instrumented systems subject to different demand modes. J. Loss Prev. Process Industries 24, 49-56. https://doi.org/10.1016/j.jlp.2010.08.014
  15. Misumi, Y., Sato, Y., 1999. Estimation of average hazardous-event-frequency for allocation of safety-integrity levels. Reliab. Eng. Syst. Saf. 66, 135-144. https://doi.org/10.1016/S0951-8320(99)00030-7
  16. NORSOK.STANDARD D-010, 2004. Well Integrity in Drilling and Well Operations. Norwegian Technology Centre, Oslo.
  17. NOG 070, 2004. Application of IEC 61508 and IEC 61511 in the Norwegian petroleum industry. Stavanger Nor. Oil Gas.
  18. OREDA, 2009. Offshore Reliability Data Handbook, fifth ed. OREDA Participants, Det Norske Veritas, Norway.
  19. Rausand, M., 2014. Reliability of Safety-critical Systems: Theory and Applications. John Wiley & Sons, Hoboken, New Jersey, US.
  20. WEST Engineering Services, 2009. Blow-out Prevention Equipment Reliability Joint Industry Project (Phase I eSubsea). WEST E. S. report, Houston.

피인용 문헌

  1. On the rapid discharge of subsea accumulators: remarks on the normed design method and proposal of improvement vol.6, pp.4, 2016, https://doi.org/10.1002/ese3.203