Magazine of the Korea Institute for Structural Maintenance and Inspection (한국구조물진단유지관리공학회지)

Korea Institute for Structural Maintenance Inspection (한국구조물진단유지관리공학회)
권호 표지

Block Shear Fracture Strength of Bolted Connections under Shear

볼트접합부의 블록전단파단내력

  • 김태수 (한밭대학교 건축공학과)
  • Published : 2016.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

Keywords

References

  1. 대한건축학회, 건축구조기준 및 해설(KBC2009), 기문당, 2009.
  2. 대한건축학회, 건축구조기준 및 해석(KBC2016안), 기문당, 2016(예정).
  3. 한국강구조학회(KSSC), 강구조설계, 2011.
  4. 일본건축학회(AIJ), 강구조한계상태설계지침.동해설, 2010.
  5. 일본건축학회(AIJ), 경강구조설계시공 지침.동해설, 2002.
  6. 대한건축학회(AIK), 냉간성형강 구조설계 기준 및 해설, 1999.
  7. AISC, MANUAL OF STEEL CONSTRUCTION : Load and Resistance Factor Design, 2001.
  8. AISC, STEEL CONSTRUCTION MANUAL, 2005.
  9. AISC, Steel construction manual. American Institute of Steel Construction, Chicago, IL, USA., 2010.
  10. AISI, North American Specification for the Design of Cold -Formed Steel Structural Members, 2007.
  11. AISI S100-10, North American specification for the design of cold-formed steel structural members. American Iron and Steel Institute, Washington D.C., USA., 2010.
  12. AS/NZS 4673, Cold-formed stainless steel structures. AS/NZS 4673, Australian Standard/New Zealand Standard Australia, Australia, 2010.
  13. Cem Topkaya, Finite element modeling of block shear failure in coped steel beams, Journal of Constructional Steel Research 63, 2007, 544-553 https://doi.org/10.1016/j.jcsr.2006.06.004
  14. Topkaya C. A, finite element parametric study on block shear failure of steel tension members. Journal of Constructional Steel Research, 2004;60, 1615-3165. https://doi.org/10.1016/j.jcsr.2004.03.006
  15. Ricles JM, Yura JA., Strength of double-row bolted-web connections. ASCE Journal of Structural Engineering, 1983;109(1), 126-142. https://doi.org/10.1061/(ASCE)0733-9445(1983)109:1(126)
  16. Drew D. A. Clements and Lip H. Teh,, Active Shear Planes of Bolted Connections Failing in Block Shear, Journal of Structural Engineering, 2013,139, 320-327. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000626
  17. Birkemoe, P. C., and Gilmor, M. I., Behavior of bearingcritical double-angle beam connections, Eng. J. AISC, 1978, 15(3), 109-115.
  18. Hardash, S. G., and Bjorhovde, R., New design criteria for gusset plates in tension, Eng. J. AISC, 1985, 22(2), 77?94.
  19. Teh, L. H., and Clements, D. D. A., Block shear capacity of bolted connections in cold-reduced steel sheets, J. Struct. Eng., 2012, 138(4), 459-467. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000478
  20. Teh, L. H., and Gilbert, B. P., Net section tension capacity of bolted connections in cold-reduced steel sheets." J. Struct. Eng., 2012, 138(3), 337-344. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000477
  21. EC3(EN 1993-1-3), Design of Steel Structures, Part 1-3 : General rules, Supplementary rules for cold-formed members and sheeting, 2005.