References
- Bodla, K. K., Murthy, J. Y. and Garimella, S. V., 2013, "Evaporation Analysis in Sintered Wick Microstructures," Int J Heat Mass Tran, Vol. 61, pp. 729-741. https://doi.org/10.1016/j.ijheatmasstransfer.2013.02.038
- Faghri, A., 1995, Heat Pipe Science and Technology, Taylor & Francis, Washington DC.
- Wong, S.-C., Liou, J.-H. and Chang, C.-W., 2010, "Evaporation Resistance Measurement with Visualization for Sintered Copper-powder Evaporator in Operating Flat-plate Heat Pipes," Int J Heat Mass Tran, Vol. 53, No. 19-20, pp. 3792-3798. https://doi.org/10.1016/j.ijheatmasstransfer.2010.04.031
- Byon, C. and Kim, S. J., 2012, "Capillary Performance of Bi-porous Sintered Metal Wicks," Int J Heat Mass Tran, Vol. 55, No. 15-16, pp. 4096-4103. https://doi.org/10.1016/j.ijheatmasstransfer.2012.03.051
- Hwang, G. S., Kaviany, M., Anderson, W. G. and Zuo, J., 2007, "Modulated Wick Heat Pipe," Int J Heat Mass Tran, Vol. 50, No. 7-8, pp. 1420-1434. https://doi.org/10.1016/j.ijheatmasstransfer.2006.09.019
- Byon, C. and Kim, S. J., 2012, "Effects of Geometrical Parameters on the Boiling Limit of Biporous Wicks," Int J Heat Mass Tran, Vol. 55, No. 25-26, pp. 7884-7891. https://doi.org/10.1016/j.ijheatmasstransfer.2012.08.016
- Byon, C. and Kim, S. J., 2011, "The Effect of Meniscus on the Permeability of Micro-post Arrays," Journal of Micromechanics and Microengineering, Vol. 21, No. 11, pp. 115011. https://doi.org/10.1088/0960-1317/21/11/115011
- Li, C., Peterson, G. P. and Wang, Y., 2006, "Evaporation/Boiling in Thin Capillary Wicks (l)-Wick Thickness Effects," Journal of Heat Transfer, Vol. 128, No. 12, pp. 1312-1319. https://doi.org/10.1115/1.2349507
- Zhang, H. G., Yu, X. D. and Braun, P. V., 2011, "Three-dimensional Bicontinuous Ultrafast-charge and -discharge Bulk Battery Electrodes," Nat Nanotechnol, Vol. 6, No. 5, pp. 277-281. https://doi.org/10.1038/nnano.2011.38
-
Taberna, P. L., Mitra, S., Poizot, P., Simon, P. and Tarascon, J. M., 2006, "High Rate Capabilities
$Fe_3O_4$ -Based Cu Nano-architectured Electrodes for Lithiumion Battery Applications," Nat Mater, Vol. 5, No. 7, pp. 567-573. https://doi.org/10.1038/nmat1672 - Rolison, D. R., Long, J. W., Lytle, J. C., Fischer, A. E., Rhodes, C. P., McEvoy, T. M., Bourg, M. E. and Lubers, A. M., 2009, "Multifunctional 3D Nanoarchitectures for Energy Storage and Conversion," Chemical Society Reviews, Vol. 38, No. 1, pp. 226-252. https://doi.org/10.1039/B801151F
- Dusseault, T. J., Gires, J., Barako, M. T., Yoonjin, W., Agonafer, D. D., Asheghi, M., Santiago, J. G. and Goodson, K. E. In Inverse Opals for Fluid Delivery in Electronics Cooling Systems, Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), 2014 IEEE Intersociety Conference on, 27-30 May 2014; 2014; pp 750-755.
- Byon, C. and Kim, S. J., 2013, "The Effect of the Particle Size Distribution and Packing Structure on the Permeability of Sintered Porous Wicks," Int J Heat Mass Tran, Vol. 61, No. 0, pp. 499-504. https://doi.org/10.1016/j.ijheatmasstransfer.2013.02.025
- Kaviany, M., 1995, Principles of Heat Transfer in Porous Media, Springer, Verlag New York, p 712.
- Carman, P. C., 1997, "Fluid flow Through Granular Beds," Chemical Engineering Research and Design, Vol. 75(Supplement), No. 0, pp. S32-S48. https://doi.org/10.1016/S0263-8762(97)80003-2
- Xu, P. and Yu, B., 2008, "Developing a New Form of Permeability and Kozeny-Carman Constant for Homogeneous Porous Media by Means of Fractal Geometry," Advances in Water Resources, Vol. 31, No. 1, pp. 74-81. https://doi.org/10.1016/j.advwatres.2007.06.003
- Ebrahimi Khabbazi, A., Ellis, J. S. and Bazylak, A., 2013, "Developing a New Form of the Kozeny-Carman Parameter for Structured Porous Media Through Lattice-Boltzmann Modeling," Computers & Fluids, Vol. 75, No. 0, pp. 35-41. https://doi.org/10.1016/j.compfluid.2013.01.008
- Nooruddin, H. A. and Hossain, M. E., 2011, "Modified Kozeny-Carmen Correlation for Enhanced Hydraulic Flow Unit Characterization," Journal of Petroleum Science and Engineering, Vol. 80, No. 1, pp. 107-115. https://doi.org/10.1016/j.petrol.2011.11.003
- Despois, J.-F. and Mortensen, A., 2005, "Permeability of Open-pore Microcellular Materials," Acta Materialia, Vol. 53, No. 5, pp. 1381-1388. https://doi.org/10.1016/j.actamat.2004.11.031
- Laschet, G., Kashko, T., Angel, S., Scheele, J., Nickel, R., Bleck, W. and Bobzin, K., 2008, "Microstructure Based Model for Permeability Predictions of Open-cell Metallic Foams Via Homogenization," Materials Science and Engineering: A, Vol. 472, No. 1-2, pp. 214-226. https://doi.org/10.1016/j.msea.2007.03.046