Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Reliability Assessment of Impact Tensile Testing Apparatus using a Drop-bar Striker for Intermediate Strain-rate Range and Evaluation of Dynamic Deformation Behaviors for a Carbon Steel

중간 변형률속도용 낙추식 충격 인장시험 장치의 신뢰성 확보 및 탄소강의 동적변형거동 평가

  • Received : 2016.01.20
  • Accepted : 2016.03.21
  • Published : 2016.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

Studies on the deformation behavior of materials subjected to impact loads have been carried out in various fields of engineering and industry. The deformation and fracture of members for these machines/structures are known to correspond to the intermediate strain-rate region. Therefore, for the structural design, it is necessary to consider the dynamic deformation behavior in these intermediate strain-rate ranges. However, there have been few reports with useful data about the deformation and fracture behavior at intermediate strain-rate ranges. Because the intermediate strain-rate region is located between quasi-static and high strain-rate regions, it is difficult to obtain the intermediate strain-rate using conventional reasonable test equipment. To solve this problem, in this study, the measurement reliability of the constructed drop-bar impact tensile test apparatus was established and the dynamic behavior at the intermediate strain-rate range of carbon steels was evaluated by utilizing the apparatus.

충격하중을 받는 재료의 변형거동에 관한 연구는 공학 및 산업의 다양한 분야에서 관심 받고 있으며, 이들 기계/구조물 부재의 변형 및 파괴거동의 다수는 중간 변형률속도 영역에 해당하는 것으로 알려져 있다. 따라서 이러한 변형률속도역에서 동적변형거동을 고려하는 것이 설계의 필수조건이 되었다. 이들 영역은 준정적과 SHPB 시험장치를 이용하는 고 변형률속도의 중간 영역에 위치하고 있어서, 종래의 적당한 시험장치를 이용하여 중 변형률속도를 얻는 것이 용이하지 않았다. 따라서 중간 변형률속도역에서 재료의 변형 및 파괴거동에 관한 유용한 데이터의 보고는 제한적이다. 본 연구에서는 이러한 문제를 해결하기 위해, 구축한 낙추식 충격 인장시험 장치의 신뢰성을 확보하였고, 이를 사용하여 탄소강의 중 변형률속도역에서 동적거동을 평가하였다.

Keywords

References

  1. Boyce, B. L. and Dilmore, M. F., 2009, "The Dynamic Tensile Behavior of Tough, Ultrahighstrength Steels at Strain-rates from 0.0002 s-1 to 200 s -1," International Journal of Impact Engineering, Vol. 36, No. 2, pp. 263-271. https://doi.org/10.1016/j.ijimpeng.2007.11.006
  2. Murr, L. E., 1987, Metallurgical Effects of Shock and High-strain-rate Loading, Elsevier Applied Science, England, T. Z. Blazynski Editor, pp. 1-46.
  3. Meyers, M. A., 1994, Dynamic Behavior of Materials, New York, John Wiley & Sons.
  4. Bleck, W. and Schael, I., 2000, "Determination of Crash-relevant Material Parameters by Dynamic Tensile Tests," Steel Research, Vol. 71, No. 5, pp. 173-178. https://doi.org/10.1002/srin.200005709
  5. Regazzoni, G., Johnson, J. N. and Follansbee, P. S., 1986, "Theoretical Study of the Dynamic Tensile Test," Journal of Applied Mechanics, Vol. 53, No. 3, pp. 519-528. https://doi.org/10.1115/1.3171805
  6. Shin, H. S., Lee, H. M. and Kim, M. S., 2000, "Impact Tensile Behavior of 9% Nickel Steel at Low Temperature," International Journal of Impact Engineering, Vol. 24, No. 6, pp. 571-581. https://doi.org/10.1016/S0734-743X(99)00181-5
  7. Singh, N. K., Cadoni, E., Singha, M. K. and Gupta, N. K., 2011, "Dynamic Tensile Behavior of Multi Phase High Yield Strength Steel," Material and Design, Vol. 32, No. 10, pp. 5091-5098. https://doi.org/10.1016/j.matdes.2011.06.027
  8. Huh, H., Kim, S. B., Song, J. H. and Lim, J. H., 2008, "Dynamic Tensile Characteristics of TRIP-type and DP-type Steel Sheets for an Auto-body," International Journal of Mechanical Sciences, Vol. 50, No. 5, pp. 918-931. https://doi.org/10.1016/j.ijmecsci.2007.09.004
  9. Bardelcik, A., Salisbury, C. P., Wells, M. A. and Worswik, M. J., 2010, "Effect of Cooling Rate on the High Strain Rate Properties of Boron Steel," International Journal of Impact Engineering, Vol. 37, No. 6, pp. 694-702. https://doi.org/10.1016/j.ijimpeng.2009.05.009
  10. Kim, H. J., Kim, C. M., Barlat, F., Pavlina, E. and Lee, M. G., 2013, "Nonlinear Elastic Behaviors of Low and High Strength Steels in Unloading and Reloading," Materials Science and Engineering A, Vol. 562, pp. 161-171. https://doi.org/10.1016/j.msea.2012.11.020
  11. Lee, H. J., Song, J. H., Huh, H. and Park, S. H., 2007, "Dynamic Constitutive Equations of AutoBody Steel Sheets with the Variation of Temperature (I)," Trans. Korean Soc. Mech. Eng. A, Vol. 31, No. 2, pp. 174-181. https://doi.org/10.3795/KSME-A.2007.31.2.174
  12. Lee, H. J., Song, J. H., Huh, H. and Park, S. H., 2007, "Dynamic Constitutive Equations of Auto-Body Steel Sheets with the Variation of Temperature (II)," Trans. Korean Soc. Mech. Eng. A, Vol. 31, No. 2, pp. 182-189. https://doi.org/10.3795/KSME-A.2007.31.2.182
  13. Shin, H. S., Bae, K. O., Kim, D. W., Park, L. J. and Kim, H. W., 2015, "Investigation of Dynamic Deformation Behaviors in Structural Steels at Intermediate Strain Rates using Newly Constructed Impact Tensile Test Apparatus," International Journal of Impact Engineering, Submitted.
  14. ASTM E8-01, 2002, Standard Test Methods for Tension Testing of Metallic Materials, Annual Book of ASTM Standards: Section 3 - Metals Test Methods and Analytical Procedures, Vol. 3.01, West Conshohocken, PA: ASTM, pp. 60-103.
  15. Shin, H. S. and Tuazon, B. J., 2015, "An Instrumented Drop-bar Impact Testing Apparatus for Investigating the Impact Fracture Behaviors of Structural Steels," International Journal of Impact Engineering, Vol. 84, No. 10, pp. 124-133. https://doi.org/10.1016/j.ijimpeng.2015.05.017
  16. Lee, S. H., Tuazon, B. and Shin, H. S., 2014, "Construction of Data Acquisition/Processing System for Precise Measurement in Split Hopkinson Pressure Bar Test, Applied Mechanics and Materials, Vol. 566, pp. 554-559. https://doi.org/10.4028/www.scientific.net/AMM.566.554
  17. Tuazon, B. J., Bae, K. O., Lee, S. H. and Shin, H. S., 2014, "Integration of a New Data Acquisition/ Processing Scheme in SHPB Test and Characterization of the Dynamic Material Properties of High-strength Steels Using the Optional form of Johnson-Cook Model," Journal of Mechanical Science and Technology, Vol. 28, No. 9, pp. 3561-3568. https://doi.org/10.1007/s12206-014-0817-8