DOI QR코드

DOI QR Code

Analytical and sensitivity approaches for the sizing and placement of single DG in radial system

  • Bindumol, E.K. (Electrical Engineering, Cochin University of Science and Technology) ;
  • Babu, C.A. (Electrical Engineering, Cochin University of Science and Technology)
  • 투고 : 2015.05.23
  • 심사 : 2016.04.05
  • 발행 : 2016.06.25

초록

Rapid depletion of fossil based oil, coal and gas reserves and its greater demand day by day necessitates the search for other alternatives. Severe environmental impacts caused by the fossil fire based power plants and the escalating fuel costs are the major challenges faced by the electricity supply industry. Integration of Distributed Generators (DG) especially, wind and solar systems to the grid has been steadily increasing due to the concern of clean environment. This paper focuses on a new simple and fast load flow algorithm named Backward Forward Sweep Algorithm (BFSA) for finding the voltage profile and power losses with the integration of various sizes of DG at different locations. Genetic Algorithm (GA) based BFSA is adopted in finding the optimal location and sizing of DG to attain an improved voltage profile and considerable reduced power loss. Simulation results show that the proposed algorithm is more efficient in finding the optimal location and sizing of DG in 15-bus radial distribution system (RDS).The authenticity of the placement of optimized DG is assured with other DG placement techniques.

키워드

참고문헌

  1. Aman, M.M., Jasmon, G.B., Mokhlis, H. and Bakar, A.H.A. (2012), "Optimal placement and sizing of a dg based on a new power stability index and line losses", Elec. Pow. Energy Syst., 43, 1296-1304. https://doi.org/10.1016/j.ijepes.2012.05.053
  2. Babu, C.A. and Ashok, S. (2009), "Optimal utilization of renewable energy based ipps for industrial load management", Renew. Energy, 34, 2455-2460. https://doi.org/10.1016/j.renene.2009.02.032
  3. Bharathi Dasan, S.G. and Selvi Ramalakshmi, S. (2009), " Optimal siting and sizing of hybrid distributed generation using ep", Proceedings of Int. Conf. on Power systems, Kharagpur, India, December.
  4. Das, D., Kothari, D.P. and Kalam, A. (1995), "Simple and efficient method for load flow solution of radial distribution networks", Elec. Pow. Energy Syst., 17(5), 335-346. https://doi.org/10.1016/0142-0615(95)00050-0
  5. Gozel, T. and Hakan Hocaoglu, M. (2009), "An analytical method for the sizing and siting of distributed generators in radial systems", Elec. Pow. Syst. Res., 79, 912-918. https://doi.org/10.1016/j.epsr.2008.12.007
  6. Hung, D.Q. and Mithulananthan, N. (2014), "Optimal placement of dispatchable and nondispatchable renewable dg units in distribution networks for minimizing energy loss", Elec. Pow. Energy Syst., 55, 179-186. https://doi.org/10.1016/j.ijepes.2013.09.007
  7. Injeti, S.K. and Prema Kumar, N. (2013), "A novel approach to identify optimal access point and capacity of multiple dgs in a small, medium and large scale radial distribution systems", Elec. Pow. Energy Syst., 45, 142-151. https://doi.org/10.1016/j.ijepes.2012.08.043
  8. Ishwarya, S. and Surya, P.R. (2014), "Renewable resource based dg unit allocation in distribution system via pso", Adv. Res. Elec. Electron. Instrum. Eng., 3, 1-6.
  9. Jain, S., Agnihotri, G. and Kamdar, R. (2014), "Siting and sizing of dg in medium primary radial distribution system with enhanced voltage stability", Chin. J. Eng., 9, 1-9.
  10. Kayal, P. and Chanda, C.K. (2013), "Placement of wind and solar based dgs in distribution system for power loss minimization and voltage stability improvement", Elec. Pow. Energy Syst., 53, 795-809. https://doi.org/10.1016/j.ijepes.2013.05.047
  11. Kirmani, K., Jamil, M. and Rizwan, M. (2011), "Optimal placement of spv based dg system for loss reduction in radial distribution network using heuristic search strategies", Proceedings of IEEE Int. Conf. on Energy, Automation and Signal, Bhubhaneshwar, India, December.
  12. Mistry, K. and Roy, R. (2012), "Crpso based optimal capacity of multi distributed generation in radial distribution", Proceedings of IEEE Int. Conference on Power and Energy, Kota Kinabalu Sabah, Malaysia, December.
  13. Mistry, K. and Roy, R. (2012), "Gsa based optimal capacity and location determination of distributed generation in radial distribution system for loss minimization", Proceedings of IEEE Int. Conference on Environment and electrical Engg, Kota Kinabalu Sabah, Malaysia, December.
  14. Mohapatra, A., Behera, S. and Nayak, S. (2012), " A study on dg and capacitor placement in radial distribution system", Proceedings of IEEE Int. Conference on Power Electronics, Drives and Energy Systems, Bengaluru, India, December.
  15. Moradi, M.H. and Abedini, M. (2012), "A combination of genetic algorithm and particle swarm optimization fore optimal dg location and sizing in distribution systems", Elec. Pow. Energy Syst., 34, 66-74. https://doi.org/10.1016/j.ijepes.2011.08.023
  16. Sai Krishna Kanth, D., Padma Lalitha, M. and Suresh Babu, P. (2013), "Siting & sizing of dg for power loss & thd reduction, voltage improvement using pso and sensitivity analysis", Eng. Res. Develop., 9(6), 1-7.
  17. Shrivastava, V.K., Rahi, O.P. and Gupta, V.K. (2012), "Optimal location of distribution generation source in power system network", Proceedings of IEEE Power India Conference.
  18. Shukla, T.N., Singh, S.P. and Naik, K.B. (2010), "Allocation of optimal distributed generation using ga for minimum system losses in radial distribution networks", Eng. Sci. Tech., 2(3), 94-106.