Smart Structures and Systems

  • 제17권6호
  • /
  • Pages.1055-1065
  • /
  • 2016
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

An anisotropic ultrasonic transducer for Lamb wave applications

  • Zhou, Wensong (Key Lab of Structures Dynamic Behavior and Control of the Ministry of Education, Harbin Institute of Technology) ;
  • Li, Hui (Key Lab of Structures Dynamic Behavior and Control of the Ministry of Education, Harbin Institute of Technology) ;
  • Yuan, Fuh-Gwo (Department of Mechanical and Aerospace Engineering, North Carolina State University)
  • 투고 : 2016.01.24
  • 심사 : 2016.04.30
  • 발행 : 2016.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

An anisotropic ultrasonic transducer is proposed for Lamb wave applications, such as passive damage or impact localization based on ultrasonic guided wave theory. This transducer is made from a PMNPT single crystal, and has different piezoelectric coefficients $d_{31}$ and $d_{32}$, which are the same for the conventional piezoelectric materials, such as Lead zirconate titanate (PZT). Different piezoelectric coefficients result in directionality of guided wave generated by this transducer, in other words, it is an anisotropic ultrasonic transducer. And thus, it has different sensitivity in comparison with conventional ultrasonic transducer. The anisotropic one can provide more information related to the direction when it is used as sensors. This paper first shows its detailed properties, including analytical formulae and finite elements simulations. Then, its application is described.

키워드

과제정보

연구 과제 주관 기관 : National Science Foundation of China

참고문헌

  1. Basseville, M., Abdelghani, M. and Benveniste, A. (2000), "Subspace-based fault detection algorithms for vibration monitoring", Automatica, 36(1), 101-109. https://doi.org/10.1016/S0005-1098(99)00093-X
  2. Cawley, P. and Alleyne, D. (1996), "The use of Lamb waves for the long range inspection of large structures", Ultrasonics, 34, 287-290. https://doi.org/10.1016/0041-624X(96)00024-8
  3. Farrar, C.R., Doebling, S.W. and Nix, D. (2001), "Vibration-based structural damage identification", Philos. T. Roy. Soc.: Mathematical, Physical and Engineering Sciences, 359(1778), 131-149. https://doi.org/10.1098/rsta.2000.0717
  4. Ma, S., Wu, Z., Wang Y. and Liu K. (2015), "The reflection of guided waves from simple dents in pipes", Ultrasonics, 57, 190-197. https://doi.org/10.1016/j.ultras.2014.11.012
  5. Matt, H.M. and Scalea, F.L. di, (2007), "Macro-fiber composite piezoelectric rosettes for acoustic source location in complex structures", Smart Mater. Struct., 16, 1489-1499. https://doi.org/10.1088/0964-1726/16/4/064
  6. Nasser, H. and Zhou, W. (2011), "Multi-source acoustic emission signals analysis based on blind source separation using macro fiber composite", Proceedings of the 8th International Workshop on Structural Health Monitoring. September 2011, Stanford University, US.
  7. Raghavan, A. and Cesnik, C.E.S. (2007), "Review of guided-wave structural health monitoring Shock", J. Vib. Dig. 39, 91-114. https://doi.org/10.1177/0583102406075428
  8. Seung, H.M., Kim, H.W. and Kim, Y.Y. (2013), "Development of an omni-directional shear-horizontal wave magnetostrictive patch transducer for plates", Ultrasonics, 53, 1304-1308. https://doi.org/10.1016/j.ultras.2013.03.015
  9. Ye, X.W., Ni, Y.Q., Wai, T.T., Wong, K.Y., Zhang, X.M. and Xu, F. (2013), "A vision-based system for dynamic displacement measurement of long-span bridges: algorithm and verification", Smart Struct. Syst., 12(3-4), 363-379. https://doi.org/10.12989/sss.2013.12.3_4.363
  10. Ye, X.W., Ni, Y.Q., Wong, K.Y. and Ko, J.M. (2012), "Statistical analysis of stress spectra for fatigue life assessment of steel bridges with structural health monitoring data", Eng. Struct., 45, 166-176. https://doi.org/10.1016/j.engstruct.2012.06.016
  11. Zhang, R., Jiang, B., Jiang, W. and Cao, W., (2006), "Complete set of elastic, dielectric, and piezoelectric coefficents of 0.93Pb(Zn1/3Nb2/3)O3-0.07PbTiO3 single crystal poled along [011]", Appl. Phys. Lett., 89(24), 242908. https://doi.org/10.1063/1.2404613
  12. Zhang, S., Jiang, W., Meyer, R.J., Li, F., Luo, J. and Cao, W. (2011), "Measurements of face shear properties in relaxor-$PbTiO_3$ single crystals", J. Appl. Phys., 110, 064106. https://doi.org/10.1063/1.3638691
  13. Zhou, W., Li, H. and Yuan, F.G. (2014), "Guided wave generation, sensing and damage detection using in-plane shear piezoelectric wafers", Smart Mater. Struct., 23(1), 015014. https://doi.org/10.1088/0964-1726/23/1/015014

피인용 문헌

  1. IWSHM 2017: damage-scattered wave extraction in an integral stiffened isotropic plate: a baseline-subtraction-free approach pp.1741-3168, 2018, https://doi.org/10.1177/1475921718769232
  2. Sensitivity analysis of circumferential transducer array with T(0,1) mode of pipes vol.21, pp.6, 2016, https://doi.org/10.12989/sss.2018.21.6.761
  3. High-speed angular-scan pulse-echo ultrasonic propagation imager for in situ non-destructive evaluation vol.22, pp.2, 2016, https://doi.org/10.12989/sss.2018.22.2.223
  4. Least-squares reverse time migration (LSRTM) for damage imaging using Lamb waves vol.28, pp.6, 2016, https://doi.org/10.1088/1361-665x/ab14b1
  5. Guided wave tomography based on least-squares reverse-time migration vol.19, pp.4, 2020, https://doi.org/10.1177/1475921719880296