Wind and Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Comparative study of control strategies for the induction generators in wind energy conversion system

  • Giribabu, D. (NIT Kurukshetra, Department of Electrical Engineering) ;
  • Das, Maloy (NIT Kurukshetra, Department of Electrical Engineering) ;
  • Kumar, Amit (NIT Kurukshetra, School of Renewable Energy)
  • Received : 2016.01.21
  • Accepted : 2016.04.20
  • Published : 2016.06.25
⟨ Previous Next ⟩

Abstract

This paper deals with the comparison of different control strategies for the Induction generators in wind energy conversion system. Mainly, two types of induction machines, Self excited induction generator (SEIG) and doubly Fed Induction generators (DFIG) are studied. The different control strategies for SEIG and DFIG are compared. For SEIG, Electronic load Controller mechanism, Static Compensator based voltage regulator are studied. For DFIG the main control strategy namely vector control, direct torque control and direct power control are implemented. Apart from these control strategies for both SEIG and DFIG to improve the performance, the ANFIS based controller is introduced in both STATCOM and DTC methods. These control methods are simulated using MATLAB/SIMULINK and performances are analyzed and compared.

Keywords

References

  1. Alghuwainem, S.M. (1999), "Steady state analysis of an isolated self excited induction generator driven by regulated and unregulated turbine", IEEE T. Energy Conver., 14(3), 718-723. https://doi.org/10.1109/60.790941
  2. Alnasir, Z.A. and Almarhoon, A.H. (2012), "Design of direct torque controller of induction motor (DTC)", Int. J. Eng. Technol., 4(2), May.
  3. Aware, M.V., Kothari, A.G. and Choube, S.O. (2000), "Application of adaptive Neuro Fuzzy controller (ANFIS) for voltage source inverter fed induction motor drive", Proceedings of the 3rd International Proceedings of Power Electronics and Motion Control Conference (IPEMC 2000), August.
  4. Bhim Singh, Senior Member, IEEE, S.S. Murthy, Life Senior Member, IEEE, and Sushma Gupta (2005), "Transient Analysis of Self-Excited Induction Generator with Electronic Load Controller (ELC) Supplying Static and Dynamic Loads", IEEE Trans. On Industry Applications, 41(5), Sep/Oct.
  5. Bhim Singh, Senior Member, IEEE, S.S. Murthy, Life Senior Member, IEEE, and Sushma Gupta (2006), "Analysis and design of electronic load controller for self-excited induction generators", IEEE T. Energy Conver., 21(1), March.
  6. Bhim Singh, Senior Member, IEEE, S.S. Murthy, Life Senior Member, IEEE, and RajaShekhara Reddy Chilipi (2014), "STATCOM-Based Controller for a three phase SEIG Feeding Single Phase Load", IEEE T. Energy Conver., 29(2), June.
  7. Bonert, R. and Hoops, G. (1989), "Stand alone induction generator with terminal impedance controller and no turbine controls", Proc. IEEE Power Engineering Soc. Summer Meeting, 28-31.
  8. ChitraVenugopal University of Kwazulu Natal/School of Electrical, Electronics and Computer Engineering, South Africa (2010), "ANFIS Based Field Oriented Control for Matrix Converter fed Induction Motor" 2010 IEEE International Conference on Power and Energy (PECon2010), Kuala Lumpur, Malaysia, Nov 29 - Dec 1.
  9. Datta, R. and Ranganathan, V.T. (2001), "Direct power control of grid-connected wound rotor induction machine without rotor position sensors", IEEE T. Power Electr., 16(3), 390-399. https://doi.org/10.1109/63.923772
  10. Global wind report (2015), http://www.gwec.net
  11. Guo, J., Cai, X. and Gong, Y. (2008), "Decoupled control of active and reactive power for a grid-connected doubly-fed induction generator", Proceedings of the 3rd International Conference on Electric Utility Deregulation and Restructuring and Power Technologies.
  12. Habetler, T., Profumo, F., Pastorelli, M. and Tolbert, L. (1992), "Direct torque control of induction machines using space vector modulation", IEEE T. Ind. Applicat., 28(5), 1045-1053. https://doi.org/10.1109/28.158828
  13. Henderson (1998), "An advanced electronic load governor for control of micro hydroelectric generation", IEEE T. Energy Conver., 13(3), 300-304. https://doi.org/10.1109/60.707611
  14. Jacomini, R.V., Rocha, C.M., Altuna, J.A.T. and Acue, J.L. (2014), "Implementation of a Neuro-Fuzzy direct torque and reactive power control for DFIM", Proceedings of the IEEE 40th Conference of Industrial Electronics Society (IECON 2014), October.
  15. Kusagur, A., Kodad, S.F. and Sankar Ram, B.V. (2010), "Modeling, design & simulation of an Adaptive Neuro Fuzzy Inference System (ANFIS) for speed control of induction motor", Int. J. Comput. Appl., vol.6, no.12, pp.29-44, September. https://doi.org/10.5120/1123-1472
  16. Makky, M. and El-Latif, N.A. (1997), "Integral-cycle control with a d.c. chopper controller for single-phase induction motor", Electr. Pow. Syst. Res., 40, 91-98. https://doi.org/10.1016/S0378-7796(96)01133-9
  17. Mechernene, A., Zerikat , M. and Chekroun, S. (2010), "Indirect field oriented adaptive control of induction motor based on Neuro-Fuzzy controller", Proceedings of the 18th Mediterranean Conference on Control & Automation Marrakech, Morocco ,June 23-25.
  18. Moghadasia, M., Kiani, R., Betin, F., Lanfranchi, V., Yazidi, A. and Capolino, G.A., Department of Electrical Engineering, ShahidChamran, University, Ahvaz, Iran (2011), "Intelligent sensorless speed control of six-phase induction machine" , 978-1-61284-972-0/11/$26.00 (C) 2011 IEEE.
  19. Murthy, S.S., Singh, B., Gupta, S. and Gulati, B.M. (2003), "General steady state analysis of three-phase self-excited induction generator feeding three phase unbalanced load/single-phase load for stand-alone applications", Proc. Inst. Elect. Eng., Gen., Transm. Distrib., 150(1), 49-55. https://doi.org/10.1049/ip-gtd:20030072
  20. Noguchi, T., Tomiki, H., Kondo, S. and Takahashi, I. (1998), "Direct power control of PWM converter without power-source voltage sensors", IEEE T. Ind. Applicat., 34( 3), 473-479. https://doi.org/10.1109/28.673716
  21. Nunes, M., Lopes, J. and Zurn, H. (2004), "Influence of the variable-speed wind generators in transient stability margin of the conventional generators integrated in electrical grids", IEEE T. Energy Conver., 19(4), 692-701. https://doi.org/10.1109/TEC.2004.832078
  22. Pingle, T., Patil, S. and Chopde, S. (2015), "Modeling and vector control of DFIG using multilevel inverter", Int. Conference on Advancement in Power and Energy, 222-227.
  23. Qiao, W. (2009), "Dynamic modeling and control of doubly fed induction generators driven by wind turbines", Proceedings of the Power Systems Conference and Exposition, 2009 IEEE/PES, March.
  24. Rajakaruna, S. and Bonert, R. (1993), "A technique for the steady-state analysis of a self-excited induction generator with variable speed", IEEE T. Energy Convers., 8(4), 757-761. https://doi.org/10.1109/60.260991
  25. Smith, N.P.A. (1996), "Induction generators for stand-alone micro-hydro systems", Proceedings of the IEEE Int. Conf. Power Electronics Drive Energy Systems for Industrial Growth, New Delhi, India.
  26. Suarez, E. and Bortolotto, G. (1999), "Voltage-frequency control of a self-excited induction generator", IEEE T. Energy Conver., 14(3), 394-401. https://doi.org/10.1109/60.790888
  27. Sudhakar, A. and Vijaya Kumar, M. (2012), "A comparative analysis of PI and Neuro-Fuzzy controllers in direct torque control of induction motor drives", Int. J. Eng. Res. Appl., 2(4), 672-680.
  28. Tremblay, E., Atayde, S. and Chandra, A. (2009), "Direct power control of a DFIG-based WECS with active filter capabilities", Proceedings of the 2009IEEEElectrical Power Energy Conf. (EPEC 2009), Montreal, QC, Canada, Oct. 22-23.
  29. Tremblay, E., Atayde, S. and Chandra, A. (2011), "Comparative study of control strategies for the doubly fed induction generator in wind energy conversion systems: A DSP-based implementation approach", IEEE T. Sustainable Energy, 2, 288-299. https://doi.org/10.1109/TSTE.2011.2113381
  30. Tremblay, E., Chandra, A. and Lagace, P. (2006), "Grid-side converter control of DFIG wind turbines to enhance power quality of distribution network", Proceedings of the 2006 IEEE Power Engineering Society General Meeting (PES2006), Montreal, QC, Canada, Jun. 18-22.
  31. Zarean, N. and Kazemi, H. (2012), "A new DTC control method of doubly fed induction generator for wind turbines", Renew. energy and distributed generation, 69-74.
  32. Zhi, D. and Xu, L. (2007), "Direct power control of DFIG with constant switching frequency and improved transient performance", IEEE T. Energy Conver., 22(1), 110-118. https://doi.org/10.1109/TEC.2006.889549

Cited by

  1. Performance improvement of wind‐driven self‐excited induction generator using fuzzy logic controller vol.29, pp.8, 2019, https://doi.org/10.1002/2050-7038.12039
  2. Performance enhancement of a stand-alone induction generator-based wind energy system using neural network controller vol.17, pp.4, 2016, https://doi.org/10.1080/15435075.2020.1723594
  3. Performance improvement of three‐phase wind‐driven SEIG using adaptive neuro‐fuzzy inference system vol.30, pp.4, 2016, https://doi.org/10.1002/2050-7038.12269
  4. Super twisting sliding mode approach applied to voltage orientated control of a stand-alone induction generator vol.6, pp.1, 2016, https://doi.org/10.1186/s41601-021-00201-2