Structural Engineering and Mechanics

  • 제58권5호
  • /
  • Pages.783-797
  • /
  • 2016
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Exact deformation of an infinite rectangular plate with an arbitrarily located circular hole under in-plane loadings

  • Yang, Yeong-Bin (MOE Key Laboratory of New Technology for Construction of Cities in Mountain Area and School of Civil Engineering, Chongqing University) ;
  • Kang, Jae-Hoon (Department of Architectural Engineering, Chung-Ang University)
  • 투고 : 2015.05.30
  • 심사 : 2016.02.29
  • 발행 : 2016.06.10
⟨ 이전 논문 다음 논문 ⟩

초록

Exact solutions for stresses, strains, and displacements of a perforated rectangular plate by an arbitrarily located circular hole subjected to both linearly varying in-plane normal stresses on the two opposite edges and in-plane shear stresses are investigated using the Airy stress function. The hoop stress occurring at the edge of the non-central circular hole are computed and plotted. Stress concentration factors (the maximum non-dimensional hoop stresses) depending on the location and size of the non-central circular hole and the loading condition are tabularized.

키워드

Acknowledgement

Supported by : Chongqing Science and Technology Commission

References

  1. Fu, L.S. (1996), A first course in elasticity, Greyden Press, Columbus, Ohio.
  2. Iwaki, T. and Miyao, K. (1980), "Stress concentrations in a plate with two unequal circular holes", Int. J. Eng. Sci., 18, 1077-1090. https://doi.org/10.1016/0020-7225(80)90091-9
  3. Kang, J.H. (2014), "Exact solutions of stresses, strains, and displacements of a perforated rectangular plate by a central circular hole subjected to linearly varying in-plane normal stresses on two opposite edges", Int. J. Mech. Sci., 84, 18-24. https://doi.org/10.1016/j.ijmecsci.2014.03.023
  4. Li, F., He, Y.T., Fan, C.H., Li, H.P. and Zhang, H.X. (2008), "Investigation on three-dimensional stress concentration of LY12-CZ plate with two equal circular holes under tension", Mater. Sci. Eng., A. 483-484, 474-476. https://doi.org/10.1016/j.msea.2006.08.146
  5. Mal, A.K. and Singh, S.J. (1991), Deformation of elastic solids, Prentice-Hall, Englewood Cliffs.
  6. Miyata, H. (1970), "Finite elastic deformations of an infinite plate perforated by two circular holes under biaxial tension", Ingenieur-Archiv, 39, 209-218. https://doi.org/10.1007/BF00532454
  7. Muskhelishvili, N.I. (1963), Some basic problems of the mathematical theory of elasticity, Noordhoff, Groningen, The Netherlands.
  8. Peterson, R.E. (1974), Stress concentration factor, John Wiley and Sons, New York.
  9. Radi, E. (2001), "Path-independent integrals around two circular holes in an infinite plate under biaxial loading conditions", Int. J. Eng. Sci., 49(9), 893-914.
  10. Savin, G.N. (1961), Stress concentration around holes, Pergamon Press, New York.
  11. She, C.M. and Guo, W.L. (2007), "Three-dimensional stress concentrations at elliptic holes in elastic isotropic plates subjected to tensile stress", Int. J. Fatig., 29, 330-335. https://doi.org/10.1016/j.ijfatigue.2006.03.012
  12. Theocaris, P.S. and Petrou, L. (1987) "The order of singularities and the stress intensity factors near corners of regular polygonal holes", Int. J. Eng. Sci., 25(7), 821-832. https://doi.org/10.1016/0020-7225(87)90119-4
  13. Timoshenko, S.P. and Goodier, J.N. (1970), Theory of elasticity, 3rd Ed., McGraw-Hill, New York.
  14. Wanlin, G. (1993), "Elastic-plastic analysis of a finite sheet with a cold-worked hole", Eng. Fract. Mech., 45(6), 857-864. https://doi.org/10.1016/0013-7944(93)90070-9
  15. Woo, H.Y., Leissa, A.W. and Kang, J.H. (2014), "Exact solutions for stresses, strains, displacements, and stress concentration factors of a perforated rectangular plate by a circular hole subjected to in-plane bending moment on two opposite edges", J. Eng. Mech., 140(6), 1-8. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000641
  16. Yang, L.H. and He, Y.Z. (2002), "Stress field analysis for infinite plate with rectangular opening", J. Harbin Eng. Univ., 23, 106-110. (in Chinese)
  17. Yang, Z., Kim, C.B., Cho, C. and Beom, H.G. (2008), "The concentration of stress and strain in finite thickness elastic plate containing a circular hole", Int. J. Solids Struct., 45, 713-731. https://doi.org/10.1016/j.ijsolstr.2007.08.030
  18. Yu, P.S., Guo, W.L., She, C.M. and Zhao, J.H. (2008), "The influence of Poisson's ratio on thicknessdependent stress concentration at elliptic holes in elastic plates", Int. J. Fatig., 30, 165-171. https://doi.org/10.1016/j.ijfatigue.2007.02.007
  19. Zhang, T., Liu, T.G., Zhao, Y. and Liu, J.X. (2002), "Analysis of stress field of finite plates weakened by holes", J. Huazhong Univ. Sci. Tech., 30, 87-89. (in Chinese)

Cited by

  1. Effect of Own Weight on the Static Analysis of a Prestretched Plate-Strip with a Circular Hole in Bending vol.53, pp.2, 2017, https://doi.org/10.1007/s11029-017-9657-9
  2. Kendi ağırlığının dairesel delik içeren eğilme altındaki öngerilmeli şerit-plağın dinamik analizine etkisi vol.2018, pp.18, 2018, https://doi.org/10.17341/gazimmfd.460487