참고문헌
- S. R. Shin, S. H. Han, and J. H. Kim, "Synthesis and characterization of soluble co-polyimides for biogas purification", Membr. J., 25, 231 (2015).
- S. H. Kwon and J. W. Rhim, "Facilitated transport separation of carbon dioxide using aminated polyetherimide membranes", Membr. J., 25, 248 (2015). https://doi.org/10.14579/MEMBRANE_JOURNAL.2015.25.3.248
- J. M. Lee, M. G. Lee, S. J. Kim, H. C. Koh, and S. Y. Nam, "Characterization of gas permeation properties of polyimide copolymer membranes", Membr. J., 25, 223 (2015). https://doi.org/10.14579/MEMBRANE_JOURNAL.2015.25.3.223
- P. Colombo, "Conventional and novel processing methods for cellular ceramics, Philosophical Transactions of the Royal Society of London A: Mathematical", Philos. Trans. R. Soc. A-Math. Phys. Eng. Sci., 364, 109 (2006). https://doi.org/10.1098/rsta.2005.1683
- A. R. Studart, U. T. Gonzenbach, E. Tervoort, and L. J. Gauckler, "Processing routes to macroporous ceramics: a review", J. Am. Ceram. Soc., 89, 1771 (2006). https://doi.org/10.1111/j.1551-2916.2006.01044.x
- M. Fukushima, Y. I. Yoshizawa, and T. Ohji, "Macroporous ceramics by gelation-freezing route using gelatin", Adv. Eng. Mater., 16, 607 (2014). https://doi.org/10.1002/adem.201400067
- M. F. Sanches, N. Vitorino, C. Freitas, J. C. C. Abrantes, J. R. Frade, J. B. R. Neto, and D. Hotza, "Cellular ceramics by gelatin gelcasting of emulsified suspensions with sunflower oil", J. Eur. Ceram. Soc., 35, 2577 (2015). https://doi.org/10.1016/j.jeurceramsoc.2015.03.008
- S. Vijayan, R. Narasimman, and K. Prabhakaran, "A urea crystal templating method for the preparation of porous alumina ceramics with the aligned pores", J. Eur. Ceram. Soc., 33, 1929 (2013). https://doi.org/10.1016/j.jeurceramsoc.2013.02.031
- G. Frank, E. Christian, and K. Dietmar, "A novel production method for porous sound-absorbing ceramic material for high-temperature applications", Int. J. Appl. Ceram. Technol., 8, 646 (2011). https://doi.org/10.1111/j.1744-7402.2009.02479.x
- S. Meille, M. Lombardi, J. Chevalier, and L. Montanaro, "Mechanical properties of porous ceramics in compression: On the transition between elastic, brittle, and cellular behavior", J. Eur. Ceram. Soc., 32, 3959 (2012). https://doi.org/10.1016/j.jeurceramsoc.2012.05.006
-
R. Stanculescu, C. E. Ciomaga, L. Padurariu, P. Galizia, N. Horchidan, C. Capiani, C. Galassi, and L. Mitoseriu, "Study of the role of porosity on the functional properties of (Ba, Sr)
$TiO_3$ ceramics", J. Alloy. Compd., 643, 79 (2009). - J. Roscow, Y. Zhang, J. Taylor, and C. R. Bowen, "Porous ferroelectrics for energy harvesting applications", Eur. Phys. J.-Spec. Top., 224, 2949 (2015). https://doi.org/10.1140/epjst/e2015-02600-y
- L. Gan, M. Zhou, D. Yang, and X. Qiu, "Adsorption characteristics of carboxymethylated lignin at a hydrophobic solid/water interface", Iran. Polym. J., 23, 47 (2014). https://doi.org/10.1007/s13726-013-0198-3
- S. Alkoy, H. Yanik, and B. Yapar, "Fabrication of lead zirconate titanate ceramic fibers by gelation of sodium alginate", Ceram. Int., 33, 389 (2007). https://doi.org/10.1016/j.ceramint.2005.09.021
- S. Li, C.-A. Wang, and J. Zhou, "Effect of starch addition on microstructure and properties of highly porous alumina ceramics", Ceram. Int., 39, 8833 (2013). https://doi.org/10.1016/j.ceramint.2013.04.072
- K.-Y. Lim, Y.-W. Kim, and I.-H. Song, "Porous sodium borate-bonded SiC ceramics", Ceram. Int., 39, 6827 (2013). https://doi.org/10.1016/j.ceramint.2013.02.014
- R. L. Menchavez, C. R. M. Adavan, and J. M. Calgas, "Starch consolidation of red clay-based ceramic slurry inside a pressure-cooking system", Mater. Res., 17, 157 (2014). https://doi.org/10.1590/S1516-14392013005000162
- R. A. Lopes and A. M. Segadaes, "Microstructure, permeability and mechanical behaviour of ceramic foams", Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 209, 149 (1996). https://doi.org/10.1016/0921-5093(95)10146-2
- H.-C. Yen, "A new slurry-based shaping process for fabricating ceramic green part by selective laser scanning the gelled layer", J. Eur. Ceram. Soc., 32, 3123 (2012). https://doi.org/10.1016/j.jeurceramsoc.2012.04.014
- B. Elyassi, M. Sahimi, and T. T. Tsotsis, "A novel sacrificial interlayer-based method for the preparation of silicon carbide membranes", J. Membr. Sci., 316, 73 (2008). https://doi.org/10.1016/j.memsci.2007.09.044
- T.-H. Yoon, H.-J. Lee, J. Yan, and D.-P. Kim, "Fabrication of SiC-based ceramic microstructures from preceramic polymers with sacrificial templates and lithographic techniques-A review", J. Ceram. Soc. Jpn., 114, 473 (2006). https://doi.org/10.2109/jcersj.114.473
- J. Deckers, J.-P. Kruth, L. Cardon, K. Shahzad, and J. Vleugels, "Densification and geometrical assessments of alumina parts produced through indirect Selective Laser Sintering of alumina-polystyrene composite powder", Strojniski Vestn.-J. Mech. Eng., 59, 646 (2013).
-
E. Mostafavi and A. Ataie, "Destructive interactions between pore forming agents and matrix phase during the fabrication process of porous
$BiFeO_3$ ceramics", J. Mater. Sci. Technol., 31, 798 (2015). https://doi.org/10.1016/j.jmst.2015.05.002 - R. Liu, T. Xu, and C.-A. Wang, "A review of fabrication strategies and applications of porous ceramics prepared by freeze-casting method", Ceram. Int., 42, 2907 (2016). https://doi.org/10.1016/j.ceramint.2015.10.148
- B. Su, D. Zhang, and T. W. Button, "Embossing of ceramic micro-pillar arrays", J. Eur. Ceram. Soc., 32, 3345 (2012). https://doi.org/10.1016/j.jeurceramsoc.2012.04.009
- D. A. Hall, J. D. S. Evans, S. J. Covey-Crump, R. F. Holloway, E. C. Oliver, T. Mori, and P. J. Withers, "Effects of superimposed electric field and porosity on the hydrostatic pressure-induced rhombohedral to orthorhombic martensitic phase transformation in PZT 95/5 ceramics", Acta Mater., 58, 6584 (2010). https://doi.org/10.1016/j.actamat.2010.07.032
- J. S. Han, C. W. Gal, J. H. Kim, and S. J. Park, "Fabrication of high-aspect-ratio micro piezoelectric array by powder injection molding", Ceram. Int., 42, 9475 (2016). https://doi.org/10.1016/j.ceramint.2016.03.011
-
J. Hur, J. H. Kim, T. G. Lee, I. T. Seo, D. H. Kim, S. Nahm, and C. Y. Kang, "Structural and piezoelectric properties of (1-x)Pb(Zr1-yTiy)
$O_3$ -xPb$(Zn_{0.4}Ni_{0.6})1/3Nb_2/3O_3$ ceramics near triple point", J. Am. Ceram. Soc., 98, 2887 (2015). https://doi.org/10.1111/jace.13687 - Y.-S. Cho, S.-Y. Choi, Y.-K. Kim, and G.-R. Yi, "Bulk synthesis of ordered macroporous silica particles for superhydrophobic coatings", J. Colloid Interface Sci., 386, 88 (2012). https://doi.org/10.1016/j.jcis.2012.07.052
- B. Yuan, H. Wu, X. Sun, G. Wang, and H. Li, "Fabrication of porous alumina green bodies from suspension emulsions by gelcasting", Mater. Lett., 81, 151 (2012). https://doi.org/10.1016/j.matlet.2012.04.112
- V. G. Resmi, J. P. Deepa, V. Lakshmi, T. P. D. Rajan, C. Pavithran, and B. C. Pai, "Processing of porous SiC by aluminum-derived binders and sacrificial porogen leaching method", Int. J. Appl. Ceram. Technol., 12, 967 (2015). https://doi.org/10.1111/ijac.12358
- U. T. Gonzenbach, A. R. Studart, E. Tervoort, and L. J. Gauckler, "Macroporous ceramics from particle-stabilized wet foams", J. Am. Ceram. Soc., 90, 16 (2007). https://doi.org/10.1111/j.1551-2916.2006.01328.x
- J. H. Lee, G. H. Ryu, J. H. Cho, T. K. Song, M. H. Kim, T. G. Park, D. Do, S. S. Kim, Y. S. Sung, andS. Baik, "A-site effects on the dielectric and the piezoelectric properties of (Na0. 50+x K0.50-x)(Nb0. 55Ta0. 45) O3 ceramics", J. Korean Phys. Soc., 60, 297 (2012). https://doi.org/10.3938/jkps.60.297
- M. Liu, H.-Q. Zhou, M. Liu, Z.-X. Yue, and H.-K. Zhu, "Effects of various fillers on sintering, microstructures and properties of Ca-Ba-Al-B-Si-O glass/ceramic composites", J. Cent. South Univ., 21, 843 (2014). https://doi.org/10.1007/s11771-014-2008-2
- B. V. M. Kumar and Y. W. Kim, "Processing of polysiloxane-derived porous ceramics: a review", Sci. Technol. Adv. Mater., 11, 044303 (2010). https://doi.org/10.1088/1468-6996/11/4/044303
- L. Y. Zhang, D. L. Zhou, Y. Chen, B. Liang, and J. B. Zhou, "Preparation of high open porosity ceramic foams via direct foaming molded and dried at room temperature", J. Eur. Ceram. Soc., 34, 2443 (2014). https://doi.org/10.1016/j.jeurceramsoc.2014.02.001
- http://www.pall.co.kr, April 12 (2016).
- K. R. Cummer and R. C. Brown, "Ancillary equipment for biomass gasification", Biomass Bioenerg., 23, 113 (2002). https://doi.org/10.1016/S0961-9534(02)00038-7
- S. Heidenreich, "Hot gas filtration- A review", Fuel, 104, 83 (2013). https://doi.org/10.1016/j.fuel.2012.07.059
- F. Yang, R. Murugan, S. Wang, and S. Ramakrishna, "Electrospinning of nano/micro scale poly (L-lactic acid) aligned fibers and their potential in neural tissue engineering", Biomaterials, 26, 2603 (2005). https://doi.org/10.1016/j.biomaterials.2004.06.051
- Q. Fan and M. S. Whittingham, "Electrospun manganese oxide nanofibers as anodes for lithium-ion batteries", Electrochem. Solid State Lett., 10, A48 (2007). https://doi.org/10.1149/1.2422749
-
H. Li, W. Zhang, B. Li, and W. Pan, "Diameter-dependent photocatalytic activity of electrospun
$TiO_2$ nanofiber", J. Am. Ceram. Soc., 93, 2503 (2010). https://doi.org/10.1111/j.1551-2916.2010.03841.x - A. Yang, X. Tao, G. K. H. Pang, and K. G. G. "Siu, Preparation of porous tin oxide nanobelts using the electrospinning technique", J. Am. Ceram. Soc., 91, 257 (2008).
- C. Ban, N. A. Chernova, and M. S. Whittingham, "Electrospun nano-vanadium pentoxide cathode", Electrochem. Commun., 11, 522 (2009). https://doi.org/10.1016/j.elecom.2008.11.051
- Z. Zhang, X. Li, C. Wang, L. Wei, Y. Liu, and C. Shao, "ZnO hollow nanofibers: fabrication from facile single capillary electrospinning and applications in gas sensors", J. Phys. Chem. C, 113, 19397 (2009). https://doi.org/10.1021/jp9070373
-
Y. He, T. Zhang, W. Zheng, R. Wang, X. Liu, Y. Xia, and J. Zhao, "Humidity sensing properties of
$BaTiO_3$ nanofiber prepared via electrospinning", Sens. Actuator B-Chem., 146, 98 (2010). https://doi.org/10.1016/j.snb.2010.02.030 -
S. K. Choi, S. Kim, S. K. Lim, and H. Park, "Photocatalytic comparison of
$TiO_2$ nanoparticles and electrospun$TiO_2$ nanofibers: effects of mesoporosity and interparticle charge transfer", J. Phys. Chem. C, 114, 16475 (2010). https://doi.org/10.1021/jp104317x -
T. Yin, D. Liu, Y. Ou, F. Ma, S. Xie, J.-F. Li, and J. Li, "Nanocrystalline thermoelectric
$Ca_3Co_4O_9$ ceramics by sol-gel based electrospinning and spark plasma sintering", J. Phys. Chem. C, 114, 10061 (2010). https://doi.org/10.1021/jp1024872 - T. Pirzada, S. A. Arvidson, C. D. Saquing, S. S. Shah, and S. A. Khan, "Hybrid silica PVA nanofibers via sol-gel electrospinning", Langmuir, 28, 5834 (2012). https://doi.org/10.1021/la300049j
-
Y. Gu, F. Jian, and X. Wang, "Synthesis and characterization of nanostructured
$Co_3O_4$ fibers used as anode materials for lithium ion batteries", Thin Solid Films, 517, 652 (2008). https://doi.org/10.1016/j.tsf.2008.07.026 -
P. S. Archana, R. Jose, T. M. Jin, C. Vijila, M. M. Yusoff, and S. Ramakrishna, "Structural and electrical properties of Nb doped anatase
$TiO_2$ nanowires by electrospinning", J. Am. Ceram. Soc., 93, 4096 (2010). https://doi.org/10.1111/j.1551-2916.2010.04003.x -
C.-J. Li and J.-N. Wang, "Electrospun
$SrRe_{0.6}$ $Fe_{11.4}$ $O_{19}$ magnetic nanofibers: Fabrication and characterization", Mater. Lett., 64, 586 (2010). https://doi.org/10.1016/j.matlet.2009.12.009 - L. Li, P. Zhang, J. Liang, and S.M. Guo, "Phase transformation and morphological evolution of electrospun zirconia nanofibers during thermal annealing", Ceram. Int., 36, 589 (2010). https://doi.org/10.1016/j.ceramint.2009.09.030
- S. H. Park, S. M. Lee, H. S. Lim, J. T. Han, D. R. Lee, H. S. Shin, Y. Jeong, J. Kim, and J. H. Cho, "Robust superhydrophobic mats based on electrospun crystalline nanofibers combined with a silane precursor", ACS Appl. Mater. Interfaces, 2, 658 (2010). https://doi.org/10.1021/am100005x
-
P.-C. Yu, R.-J. Yang, Y.-Y. Tsai, W. Sigmund, and F.-S. Yen, "Growth mechanism of single-crystal a-
$Al_2O_3$ nanofibers fabricated by electrospinning techniques", J. Eur. Ceram. Soc., 31, 723 (2011). https://doi.org/10.1016/j.jeurceramsoc.2010.11.011 - X. B. Ke, Z. F. Zheng, H. W. Liu, H. Y. Zhu, X. P. Gao, L. X. Zhang, N. P. Xu, H. Wang, H. J. Zhao, and J. Shi, "High-flux ceramic membranes with a nanomesh of metal oxide nanofibers", J. Phys. Chem. B, 112, 5000 (2008). https://doi.org/10.1021/jp709837r
- B.-Y. Lee, K. Behler, M. E. Kurtoglu, M. A. Wynosky-Dolfi, R. F. Rest, and Y. Gogotsi, "Titanium dioxide-coated nanofibers for advanced filters", J. Nanopart. Res., 12, 2511 (2010). https://doi.org/10.1007/s11051-009-9820-x
- C. Feng, K. C. Khulbe, T. Matsuura, S. Tabe, and A. F. Ismail, "Preparation and characterization of electro-spun nanofiber membranes and their possible applications in water treatment", Sep. Purif. Technol., 102, 118 (2013). https://doi.org/10.1016/j.seppur.2012.09.037
- Q. Wang, Y. Bai, J. Xie, Q. Jiang, and Y. Qiu, "Synthesis and filtration properties of polyimide nanofiber membrane/carbon woven fabric sandwiched hot gas filters for removal of PM 2.5 particles", Powder Technol., 292, 24 (2016).