Steel and Composite Structures

  • 제21권1호
  • /
  • Pages.195-216
  • /
  • 2016
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Dynamic characteristics analysis of partial-interaction composite continuous beams

  • Fang, Genshen (State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji University) ;
  • Wang, Jingquan (Key Laboratory of Concrete and Prestressed Concrete Structure of Ministry of Education, School of Civil Engineering, Southeast University) ;
  • Li, Shuai (Key Laboratory of Concrete and Prestressed Concrete Structure of Ministry of Education, School of Civil Engineering, Southeast University) ;
  • Zhang, Shubin (Jiangsu Province Communications Planning and Design Institute Co., Ltd.)
  • 투고 : 2015.06.25
  • 심사 : 2016.03.07
  • 발행 : 2016.05.20
⟨ 이전 논문 다음 논문 ⟩

초록

The dynamic characteristics of continuous steel-concrete composite beams considering the effect of interlayer slip were investigated based on Euler Bernoulli's beam theory. A simplified calculation model was presented, in which the Mode Stiffness Matrix (MSM) was developed. The natural frequencies and modes of partial-interaction composite continuous beams can be calculated accurately and easily by the use of MSM. Proceeding from the present method, the natural frequencies of two-span steel-concrete composite continuous beams with different span-ratios (0.53, 0.73, 0.85, 1) and different shear connection stiffnesses on the interface are calculated. The influence pattern of interfacial stiffness on bending vibration frequency was found. With the decrease of shear connection stiffness on the interface, the flexural vibration frequencies decrease obviously. And the influence on low order modes is more obvious while the reduction degree of high order is more sizeable. The real natural frequencies of partial-interaction continuous beams commonly used could have a 20% to 40% reduction compared with the fully-interaction ones. Furthermore, the reduction-ratios of natural frequencies for different span-ratios two-span composite beams with uniform shear connection stiffnesses are totally the same. The span-ratio mainly impacts on the mode shape. Four kinds of shear connection stiffnesses of steel-concrete composite continuous beams are calculated and compared with the experimental data and the FEM results. The calculated results using the proposed method agree well with the experimental and FEM ones on the low order modes which mainly determine the vibration properties.

키워드

과제정보

연구 과제 주관 기관 : Central Universities

참고문헌

  1. Adam, C., Heuer, R. and Jeschko, A. (1997), "Flexural vibrations of elastic composite beams with interlayer slip", Acta. Mech., 125(1-4), 17-30. https://doi.org/10.1007/BF01177296
  2. Berczynski, S. and Wroblewski, T. (2005), "Vibration of steel-concrete composite beams using the Timoshenko beam mode", J. Vib. Control, 11(6), 829-848. https://doi.org/10.1177/1077546305054678
  3. Berczynski, S. and Wroblewski, T. (2010), "Experimental verification of natural vibration models of steelconcrete composite beams", J. Vib. Control, 16(14), 2057-2081. https://doi.org/10.1177/1077546309350552
  4. Biscontin, G., Morassi, A. and Wendel, P. (2000), "Vibrations of steel-concrete composite beams", J. Vib. Control, 6(5), 691-714. https://doi.org/10.1177/107754630000600503
  5. Chakrabarti, A., Sheikh, A.H., Griffith, M. and Oehlers, D.J. (2013), "Dynamic response of composite beams with partial shear interaction using a higher-order beam theory", J. Struct. Eng., 139(1), 47-56. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000603
  6. Girhammar, U.A. and Pan, D.H. (1993), "Dynamic analysis of composite members with interlayer slip", Int. J. Solids. Sturct., 30(6), 797-823. https://doi.org/10.1016/0020-7683(93)90041-5
  7. Hayashikawa, T. and Watanabe, N. (1985), "Free vibration analysis of continuous beams", J. Eng. Mech., 111(5), 639-652. https://doi.org/10.1061/(ASCE)0733-9399(1985)111:5(639)
  8. Hou, Z.M., Xia, H. and Zhang, Y.L. (2012), "Dynamic analysis and shear connector damage identification of steel-concrete composite beams", Steel Compos. Struct., Int. J., 13(4), 327-341. https://doi.org/10.12989/scs.2012.13.4.327
  9. Huang, C.W. and Su, Y.H. (2008), "Dynamic characteristics of partial composite beams", Int. J. Struct. Stab. Dy., 8(4), 665-685. https://doi.org/10.1142/S0219455408002946
  10. Inoue, K. and Ishikawa, K. (2010), "Free vibration analysis of multi layered beam members including the effect of interlayer slip", Int. J. Struct. Eng., 1(3/4), 327-339. https://doi.org/10.1504/IJSTRUCTE.2010.033486
  11. Johnson, R.P. and May, I.M. (1975), "Partial-interaction design of composite beams", Struct. Eng., 53(8), 305-311.
  12. Nguyen, Q.H., Hjiaj, M. and Grognec, P.L. (2012), "Analytical approach for free vibration analysis of twolayer Timoshenko beams with interlayer slip", J. Sound. Vib., 331(12), 2949-2961. https://doi.org/10.1016/j.jsv.2012.01.034
  13. Nie, J.G. (2011), Steel-Concrete Composite Bridges, China Communications Press, Beijing, China. [In Chinese]
  14. Nie, J.G., Tao, M.X., Cai, C.S. and Li, S.J. (2009), "Deformation analysis of prestressed continuous steelconcrete composite beams", J. Struct. Eng., 135(11), 1377-1389. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000067
  15. Qi, J.J., Jiang, L.Z., Zhang, C.Z. and Yu, Z.W. (2010), "Effects of interface slip, vertical uplift and shear deformation on dynamic behavior of steel-concrete composite continuous beams", J. Central South Univ. (Science and Technology), 41(6), 2334-2343. [In Chinese]
  16. Ranzi, G. and Zona, A. (2009), "A steel-concrete composite beam model with partial interaction including the shear deformability of the steel component", Eng. Struct., 29(11), 3026-3041. https://doi.org/10.1016/j.engstruct.2007.02.007
  17. Shen, X.D., Chen, W.Q., Wu, Y.F. and Xu, R.Q. (2011), "Dynamic analysis of partial-interaction composite beams", Compos. Sci. Technol., 71(10), 1286-1294. https://doi.org/10.1016/j.compscitech.2011.04.013
  18. Shen, X.D., Chen, W.Q. and Xu, R.Q. (2012), "Dynamic analysis of partial-interactive composite beam with axial force", J. Vib. Eng., 25(5), 514-521.
  19. Wang, Y.C. (1998), "Deflection of steel-concrete composite beams with partial shear interaction", J. Struct. Eng., 124(10), 1159-1165. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:10(1159)
  20. Wroblewski, T., Pelka-Sawenko, A., Abramowica, M. and Berczynski, S. (2012), "Modeling and analysis of free vibration of steel-concrete composite beams by finite element method", Adv. Manuf. Sci. Technol., 36(4), 85-96.
  21. Wu, Y.F., Xu, R.Q. and Chen, W.Q. (2007), "Free vibrations of the partial-interaction composite members with axial force", J. Sound. Vib., 299(4-5), 1074-1093. https://doi.org/10.1016/j.jsv.2006.08.008
  22. Xu, R.Q. and Wu, Y.F. (2007), "Static, dynamic, and bulking analysis of partial interaction composite members using Timoshenko's beam theory", Int. J. Mech. Sci., 49(10), 1139-1155. https://doi.org/10.1016/j.ijmecsci.2007.02.006
  23. Zhang, S.B. (2014), "Experimental and theoretical study of dynamic properties for steel-concrete composite beam bridges with interlayer slip", Master Thesis; Southeast University, Nanjing, China. [In Chinese]
  24. Zhou, W.B., Jiang, L.Z., Yu, Z.W. and Huang, Z. (2013), "Free vibration characteristics of steel-concrete composite continuous box girder considering shear lag and slip", Chia J. Highway Transport, 26(5), 88-94. [In Chinese]

피인용 문헌

  1. Natural vibration analysis of steel–concrete composite box beam using improved finite beam element method 2018, https://doi.org/10.1177/1369433217734638
  2. Numerical investigation of continuous composite girders strengthened with CFRP vol.21, pp.6, 2016, https://doi.org/10.12989/scs.2016.21.6.1307
  3. Free vibrations of precast modular steel-concrete composite railway track slabs vol.24, pp.1, 2016, https://doi.org/10.12989/scs.2017.24.1.113
  4. Behavior of headed shear stud connectors subjected to cyclic loading vol.25, pp.6, 2016, https://doi.org/10.12989/scs.2017.25.6.705
  5. Vibration analysis of honeycomb sandwich composites filled with polyurethane foam by Taguchi Method vol.28, pp.4, 2016, https://doi.org/10.12989/scs.2018.28.4.461
  6. Shear lag effect in steel-concrete composite beam in hogging moment vol.31, pp.1, 2019, https://doi.org/10.12989/scs.2019.31.1.027
  7. Flexural and eigen-buckling analysis of steel-concrete partially composite plates using weak form quadrature element method vol.26, pp.11, 2016, https://doi.org/10.1007/s11771-019-4238-9
  8. Use of UHPC slab for continuous composite steel-concrete girders vol.34, pp.3, 2016, https://doi.org/10.12989/scs.2020.34.3.321
  9. Exact Dynamic Characteristic Analysis of Steel-Concrete Composite Continuous Beams vol.2021, pp.None, 2016, https://doi.org/10.1155/2021/5577276
  10. Free Vibrations of Steel-Concrete Composite Beams by the Dynamic Direct Stiffness Method vol.21, pp.4, 2016, https://doi.org/10.1142/s0219455421500498