Steel and Composite Structures

  • 제21권1호
  • /
  • Pages.157-175
  • /
  • 2016
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Experimental research on seismic behavior of SRC-RC transfer columns

  • Wu, Kai (College of Civil and Transportation Engineering, Hohai University) ;
  • Xue, Jianyang (School of Civil Engineering, Xi'an University of Architecture & Technology) ;
  • Nan, Yang (College of Civil and Transportation Engineering, Hohai University) ;
  • Zhao, Hongtie (School of Civil Engineering, Xi'an University of Architecture & Technology)
  • 투고 : 2015.04.25
  • 심사 : 2016.03.09
  • 발행 : 2016.05.20
⟨ 이전 논문 다음 논문 ⟩

초록

It was found that the lateral stiffness changes obvious at the transfer position of the section configuration from SRC to RC. This particular behavior leads to that the transfer columns become as the important elements in SRC-RC hybrid structures. A comprehensive study was conducted to investigate the seismic behavior of SRC-RC transfer columns based on a low cyclic loading test of 16 transfer columns compared with 1 RC column. Test results shows three failure modes for transfer columns, which are shear failure, bond failure and bend failure. Its seismic behavior was completely analyzed about the failure mode, hysteretic and skeleton curves, bearing capacity deformation ability, stiffness degradation and energy dissipation. It is further determined that displacement ductility coefficient of transfer columns changes from 1.97 to 5.99. The stiffness of transfer columns are at the interval of SRC and RC, and hence transfer columns can play the role of transition from SRC to RC. All specimens show similar discipline of stiffness degradation and the process can be divided into three parts. Some specimens of transfer column lose bearing capacity swiftly after shear cracking and showed weak energy dissipation ability, but the others show better ability of energy dissipation than RC column.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China, Postdoctoral Science Foundation of China, Central Universities

참고문헌

  1. Azizinamini, A. and Ghosh, S.K. (1997), "Steel reinforced concrete structures in 1995 Hyogoken-Nanbu earthquake", J. Struct. Eng., 123(8), 113-138. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:1(113)
  2. Bae, S.J. and Bayrak, O. (2008), "Seismic performance of full-scale reinforced concrete columns", ACI Struct. J., 105(2), 123-133.
  3. Chen, C.C. and Lin, N.J. (2006), "Analytical model for predicting axial capacity and behavior of concrete encased steel composite stub columns", J. Construct. Steel Res., 62(5), 424-433. https://doi.org/10.1016/j.jcsr.2005.04.021
  4. Chen, C., Wang, C. and Sun, H. (2014), "Experimental study on seismic behavior of full encased steelconcrete composite columns", J. Struct. Eng., 140(6), 04014024. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000951
  5. Chung, Y.S., Shim, C.S. and Hong, H.K. (2012), "Shake table tests of steel embedded composite columns under moderate near-fault motion", Steel Structure, 12(4), 551-562. https://doi.org/10.1007/s13296-012-4010-6
  6. Dai, G.L., Jiang, Y.S., Fu, C.G. and Shuting, L. (2003), "Experimental study on aseismic behaviors of transfer story with steel reinforced concrete in low stories of large space", China Civil Eng. J., 36(4), 24-32.
  7. Du, E.F., Shu, G.P. and Mao, X.Y. (2013), "Experimental study on aseismic behaviors of transfer story with steel reinforced concrete in low stories of large space", Steel Structure, 13(1), 129-140. https://doi.org/10.1007/s13296-013-1012-y
  8. Goncalves, R. and Carvalho, J. (2014), "An efficient geometrically exact beam element for composite columns and its application to concrete encased steel I-sections", Eng. Struct., 75(5), 13-224.
  9. Guo, Z.H. (2013), Reinforced Concrete Theory and Analyze, Tsinghua University, Beijing, China.
  10. Kimura, J. and Shingu, Y. (1998), "Structural performance of SRC-RC mixed member under cyclic bending moment and shear", Summaries of Technical Papers of Annual Meeting, Architectural Institute of Japan, Kyushu, Japan, July.
  11. Kon-No, S., Imaizumi, T., Yamamoto, K. and Minami, K. (1998), "Experimental study on high-rise building with lower layer composed of SRC structure. Part 1: Outline of the tests about deformation capacity of SRC columns", Summaries of Technical Papers of Annual Meeting, Architectural Institute of Japan, Kyushu, Japan, July.
  12. Oyawa, W.O. (2007), "Steel encased polymer concrete under axial compressive loading: Analytical formulations", Construct. Build. Mater., 21(1), 57-65. https://doi.org/10.1016/j.conbuildmat.2005.07.013
  13. Pandey, G.R., Mutsuyoshi, H. and Maki, T. (2008), "Seismic performance of bond controlled RC columns", Eng. Struct., 30(9), 2538-2547. https://doi.org/10.1016/j.engstruct.2008.02.001
  14. Park, K.D., Kim, H.J. and Hwang, W.S. (2012), "Experimental and numerical studies on the confined effect of steel composite circular columns subjected to axial load", Steel Structure, 12(2), 253-265. https://doi.org/10.1007/s13296-012-2009-7
  15. Rodrigues, J.P.C., Correia, A.J.M. and Pires, T.A.C. (2015), "Behaviour of composite columns made of totally encased steel sections in fire", J. Construct. Steel Res., 105(5), 98-106.
  16. Suzuki, H., Nishihara, H. and Matsuzaki, Y. (1999), "Shear performance of the column where structural form changes from SRC to RC", Summaries of Technical Papers of Annual Meeting, Architectural Institute of Japan, Chyugoku, Japan, July.
  17. Tikka, T.K. and Mirza, S.A. (2006), "Nonlinear equation for flexural stiffness of slender composite columns in major axis bending", J. Struct. Eng., 132(3), 387-399. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:3(387)
  18. Yamaguchi, M., Kimura, J., Chung, J. and Kawano, A. (2004), "Skeleton curve model of SRC-RC mixed columns", Summaries of Technical Papers of Annual Meeting, Architectural Institute of Japan, Hokkaidou, Japan, July.
  19. Yamashita, R. and Sanders, D.H. (2009), "Seismic performance of precast unbonded prestressed concrete columns", ACI Struct. J., 106(6), 821-830.
  20. Yang, Y., Zhang, Z. and Nie, Z. (2006), "Design of transition story of steel reinforced concrete (SRC) vertical hybrid structures", J. Fuzhou Univ. (Natural Science), 34(3), 399-404.

피인용 문헌

  1. Analysis on Extension Length of Shape Steel in Transfer Columns of SRC–RC Hybrid Structures vol.18, pp.3, 2018, https://doi.org/10.1007/s13296-018-0038-6
  2. Lateral Bearing Capacity and Stiffness Calculation Method of SRC-RC Columns pp.1976-3808, 2019, https://doi.org/10.1007/s12205-019-0232-x
  3. Seismic behavior of steel tube reinforced concrete bridge columns vol.28, pp.1, 2016, https://doi.org/10.12989/scs.2018.28.1.063
  4. Experimental study on shear damage and lateral stiffness of transfer column in SRC-RC hybrid structure vol.23, pp.5, 2016, https://doi.org/10.12989/cac.2019.23.5.335
  5. Failure Modes and Damage Processes of Vulnerable Stories in SRC-RC Hybrid Frames vol.33, pp.5, 2016, https://doi.org/10.1061/(asce)cf.1943-5509.0001323
  6. Investigations of different steel layouts on the seismic behavior of transition steel-concrete composite connections vol.8, pp.3, 2016, https://doi.org/10.12989/acc.2019.8.3.173