Membrane and Water Treatment

  • 제7권3호
  • /
  • Pages.175-191
  • /
  • 2016
  • /
  • 2005-8624(pISSN)
  • /
  • 2092-7037(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Energy-saving potential of cross-flow membrane emulsification by ceramic tube membrane with inserted cross-section reducers

  • Albert, K. (Szent Istvan University, Faculty of Food Science, Department of Food Engineering) ;
  • Vatai, Gy. (Szent Istvan University, Faculty of Food Science, Department of Food Engineering) ;
  • Giorno, L. (Istituto per la Tecnologia delle Membrane, Consiglio Nazionale delle Ricerche) ;
  • Koris, A. (Szent Istvan University, Faculty of Food Science, Department of Food Engineering)
  • 투고 : 2014.03.26
  • 심사 : 2016.01.09
  • 발행 : 2016.05.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this work, oil-in-water emulsions (O/W) were prepared successfully by membrane emulsification with $0.5{\mu}m$ pore size membrane. Sunflower oil was emulsified in aqueous Tween80 solution with a simple crossflow apparatus equipped with ceramic tube membrane. In order to increase the shear-stress near the membrane wall, a helical-shaped reducer was installed within the lumen side of the tube membrane. This method allows the reduction of continuous phase flow and the increase of dispersed phase flux, for cost effective production. Results were compared with the conventional cross-flow membrane emulsification method. Monodisperse O/W emulsions were obtained using tubular membrane with droplet size in the range $3.3-4.6{\mu}m$ corresponded to the membrane pore diameter of $0.5{\mu}m$. The final aim of this study is to obtain O/W emulsions by simple membrane emulsification method without reducer and compare the results obtained by membrane equipped with helix shaped reducer. To indicate the results statistical methods, $3^p$ type full factorial experimental designs were evaluated, using software called STATISTICA. For prediction of the flux, droplet size and PDI a mathematical model was set up which can describe well the dependent variables in the studied range, namely the run of the flux and the mean droplet diameter and the effects of operating parameters. The results suggested that polynomial model is adequate for representation of selected responses.

키워드

과제정보

연구 과제 주관 기관 : Hungarian National Scientific Foundation

참고문헌

  1. Ahmad, A.L., Maridas, A. and Lau, K.K. (2005), "Flux Enhancement by Introducing Turbulence Effect for Microfiltration of Saccharomyces cerevisiae", Sep. Sci. Tec., 40(6), 1213-1225. https://doi.org/10.1081/SS-200052788
  2. Arzensek, D. (2010), "Dynamic light scattering and application to proteins in solutions", Seminar University of Ljubljana, pp. 1-18.
  3. De Luca, G. and Drioli, E. (2006), "Force balance conditions for droplet formation in cross-flow membrane emulsifications", J. Colloid Interface Sci., 294(2), 436-448. https://doi.org/10.1016/j.jcis.2005.07.055
  4. De Luca, G., Di Maio, F., Di Renzo, A. and Drioli, E. (2008), "Droplet detachment in cross-flow membrane emulsification: comparison among torque and force-based models", Chem. Eng. Proc., 47(7), 1150-1158. https://doi.org/10.1016/j.cep.2007.03.010
  5. Hancocks, R.D., Spyropoulos, F. and Norton, I.T. (2013), "Comparisons between membranes for use in cross flow membrane emulsification", J. Food Eng., 116(2), 382-389. https://doi.org/10.1016/j.jfoodeng.2012.11.032
  6. Holdich, R.G., Dragosavac, M.M., Vladisavljevic, G.T. and Kosvintsev, S.R. (2010), "Membrane emulsification with oscillating and stationary membranes", Ind. Eng. Chem. Res., 49(8), 3810-3817. https://doi.org/10.1021/ie900531n
  7. Holdich, R.G., Dragosavac, M.M., Vladisavljevic, G.T. and Piacentini, E. (2013),"Continuous membrane emulsification with pulsed (oscillatory) flow", Ind. Eng. Chem. Res., 52(1), 507-515. https://doi.org/10.1021/ie3020457
  8. Jokic, A., Zavargo, Z., Seres, Z. and Tekic, M. (2010), "The effect of turbulence promoter on cross-flow microfiltration of yeast suspensions: A response surface methodology approach", J. Memb. Sci., 350(1-2), 269-278. https://doi.org/10.1016/j.memsci.2009.12.037
  9. Koris, A., Piacentini, E., Vatai, G., Bekassy-Molnar, E., Drioli, E. and Giorno, L. (2011), "Investigation on the effects of a mechanical shear-stress modification method during cross-flow membrane emulsification", J. Membr. Sci., 371(1-2), 28-36. https://doi.org/10.1016/j.memsci.2011.01.005
  10. Manga, M.S., Cayre, O.J., Williams, R.A., Biggs, S. and York, D.W. (2012), "Production of solid-stabilised emulsions through rotational membrane emulsification: Influence of particle adsorption kinetics", Soft Matter, 8(5), 1532-1538. https://doi.org/10.1039/C1SM06547E
  11. Matos, M., Suarez, M.A., Gutierrez, G., Coca, J. and Pazos C. (2013), "The effect of turbulence promoter on cross-flow microfiltration of yeast suspensions: A response surface methodology approach", J. Membr. Sci., 444, 345-358. https://doi.org/10.1016/j.memsci.2013.05.033
  12. Montillet, A., Nedjar, S. and Tazerout, M. (2013), "Continuous production of water-in-oil emulsion using micromixers", Fuel, 106, 410-416. https://doi.org/10.1016/j.fuel.2012.11.018
  13. Nakashima, T., Shimizu, M. and Kukizaki, M. (1991), Membrane Emulsification Operation Manual, Industrial Research Institute of Miyazaki Prefecture, Japan.
  14. Schroder, V. and Schubert, H. (1999), "Production of emulsions using microporous ceramic membranes", Colloids Surf. A: Physicochem. Eng. Aspects, 152(1-2), 103-109. https://doi.org/10.1016/S0927-7757(98)00688-8
  15. Silvestre de los Reyes, J. and Charcosset, C. (2010), "Preparation of water-in-oil and ethanol-in-oil emulsions by membrane emulsification", Fuel, 89(11), 3482-3488. https://doi.org/10.1016/j.fuel.2010.06.036
  16. Vladisavljevic, G.T. and Williams, R.A. (2005), "Recent developments in manufacturing emulsions and particulate products using membranes", Adv. Coll. Interf. Sci., 113(1), 1-20. https://doi.org/10.1016/j.cis.2004.10.002
  17. Vladisavljevic, G.T. and Williams, R.A. (2006), "Manufacture of large uniform droplets using rotating membrane emulsification", J. Colloid Interface Sci., 299(1), 396-402. https://doi.org/10.1016/j.jcis.2006.01.061
  18. Vladisavljevic, G.T., Brosel, S. and Schubert, H. (2000), "Preparation of water-in-oil emulsions using microporous polypropylene hollow fibers: conditions for producing small uniform droplets", Chem. Papers, 54(6a), 383-388.
  19. Williams, R.A., Peng, S.J., Wheeler, D.A., Morley, N.C., Taylor, D., Whalley, M. and Houldsworth, D.W. (1998), "Controlled production of emulsions using a crossflow membrane part II: Industrial scale manufacture", Chem. Eng. Res. Des., 76(8) 902-910. https://doi.org/10.1205/026387698525702
  20. Zhu, J. and Barrow, D. (2005), "Analysis of droplet size during crossflow membrane emulsification using stationary and vibrating micromachined silicon nitride membranes", J. Membr. Sci., 261(1-2), 136-144. https://doi.org/10.1016/j.memsci.2005.02.038

피인용 문헌

  1. Application of nanofiltration membrane for the River Nile water treatment in Egypt: Case study vol.9, pp.4, 2016, https://doi.org/10.12989/mwt.2018.9.4.233
  2. Reduction of energy demand for UF cross-flow membranes in MBR by sponge ball cleaning vol.12, pp.2, 2016, https://doi.org/10.12989/mwt.2021.12.2.065