Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

Development of Jig Type Chuck for Roundness Improvement in a Machining of High Stage Speed Gear

고단속 기어의 가공 시 진원도 향상을 위한 지그척 개발

  • Received : 2015.12.08
  • Accepted : 2016.01.18
  • Published : 2016.02.29
Download PDF
⟨ Previous Next ⟩

Abstract

Recently, the requirements for high precision and efficiency machining are gradually increased to raise international competitiveness at the industrial fields of automotive and gears. This trend had made effects on the industrial fields in Korea and which needs further studying of high accuracy and efficiency machining. This study is to investigate the effects of Jig type chuck for roundness improvement in CNC turning machining of high stage speed gear. After hobbing machining, Dimensional change before and after heat treatment was very largely generated. In order to solve this problem was to develop a jig type chuck. After the heat treatment, the operation of the chuck which was the most distinguished equipment among Jig type chuck(0.006mm), Scroll type chuck(0.05mm) and Bolt type chuck(0.04mm). Therefore, Jig type chuck was satisfied the requirement from the actual field(0.02mm).

Keywords

References

  1. Hwang. D. Y., "Machining Accuracy of Cylindrical Workpiece Held by a Three - Jaw," Journal of Korean Industrial Education Association, pp. 68-75, 1984.
  2. Shin K. S., "Effect of Surface Roughness on Cutting Conditions in CNC lathe C-Axis Milling Arc Cutting" Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13 No. 4, pp. 99-105, 2014.
  3. Pack. I. S., "A Study on the Development of an Automatic Workpiece Loading Mechanism using ADAMS," A Thesis for a Master, Gyungnam University, Republic of Korea, 2008.
  4. Jo Sung Eng (2014), Products Info, Chuck & Cylinder, "Draw Down Chuck", Retrieved 30, Nov., 2014, from http://josungeng.com.
  5. Jig Tech Win ((2014), Products, Collet System, "COLLET Chuck for Bevel gear cutting", Retrieved 30, Nov., 2014, from http://www.jintechwin.co.kr.

Cited by

  1. A Study on the Design and Performance Test of Side Thruster vol.16, pp.2, 2017, https://doi.org/10.14775/ksmpe.2017.16.2.001
  2. 유성기어 주행감속기 치형의 마이크로 지오메트리 최적화에 관한 연구 vol.34, pp.6, 2016, https://doi.org/10.7736/kspe.2017.34.6.371
  3. 하이포이드 회전감속기의 가속 수명시험 방법에 관한 연구 vol.16, pp.3, 2016, https://doi.org/10.14775/ksmpe.2017.16.3.063
  4. Study on Tooth Micro-geometry Optimization of Rear Gear Set in 2 Speed Planetary Gear Reducer vol.16, pp.5, 2017, https://doi.org/10.14775/ksmpe.2017.16.5.001
  5. A Study on the Gear Tooth Micro-Geometry Optimization of Angle Drive Unit vol.35, pp.5, 2016, https://doi.org/10.7736/kspe.2018.35.5.473
  6. 마이크로 지오메트리 방법을 이용한 크로스 드릴링/밀링 유닛 구동기어의 동력전달 최적화에 관한 연구 vol.18, pp.4, 2016, https://doi.org/10.14775/ksmpe.2019.18.4.093