References
- I. K. Kwon, N. Y. Jee and H. Y. Kim, "Experimental Study on the Determination of Fire Protection Thickness through Section Factors of Structural Steels", Journal of the Architectural Institute of Korea, Vol. 18, No. 9, pp. 125-132 (2002).
- S. C. Kim, "Correlation Analysis with Fire Endurance Time based on Section Factor to Obtain an Estimate of Fire Protection Material Thickness", Architectural Engineering Master's Thesis, Chungju National University (2009).
- S. H. Lee, K. H. Kim, M. S. Lee, H. Y. Kim, H. D. Kim, T. H. Song, C. Y. Ok, B. K. Jin, et al., "Development of Fire Resistance Design Method in Building", KICT 2004-376, Korea Institute of Civil Engineering and Building Technology (2004).
- Korea Institute of Civil Engineering and Building Technology, "Certificate List of Fire Resistant Construction", http://www.kict.re.kr/060305 (2015).
- Ministry of Land, Infrastructure and Transport, "The Evacuative and Fireproof Construction of Buildings", Minister Decree No:238 (2015).
- Ministry of Land, Infrastructure and Transport, "Standards for Accreditation and Management of Fire Resistant Construction", Notification No:2015-843 (2015).
- Ministry of Land, Infrastructure and Transport, "Detail Instructions for Accreditation and Management of Fire Resistant Construction", Document No:14814 (2015).
- K. L. Ueom, C. H. Yoo, S. M. Jeon and D. H. Kim, "Environment-friendly Intumescent Coatings", Prospects of Industrial Chemistry, Vol. 16, No. 5, pp. 19-27 (2013).
- Korea Agency for Technology and Standards, "Methods of Fire Resistance Test for Elements of Building Construction-general Requirements", KS F 2257-1:2014 (2014).
- Korea Agency for Technology and Standards, "Methods of Fire Resistance Test for Elements of Building Construction-specific Requirements for Beams", KS F 2257- 6:2014 (2014).
- Korea Agency for Technology and Standards, "Methods of Fire Resistance Test for Elements of Building Construction-specific Requirements for Columns", KS F 2257-7:2014 (2014).
- S. M. Jeon and J. J. Kim, "Experimental Study on Separate Evaluations of Fire Resistance of SFRM for Steel Beams and Columns", Fire Science and Engineering, Vol. 29, No. 4, pp. 1-6 (2015). https://doi.org/10.7731/KIFSE.2015.29.4.001
- K. H. Kim and S. H. Lee, "Improvement of Criteria of Steel Temperature and Shapes of Specimens for Fire Resistance Properties Tests of Steel Structure", Journal of the Architectural Institute of Korea, Vol. 18, No. 3, pp. 11-19 (2002).
- I. K. Kwon, N. Y. Jee and S. H. Lee, "Experimental Study on the Critical Temperature for Structural Elements Such as Column and Beam Exposed to Fire Conditions", Journal of the Architectural Institute of Korea, Vol. 18, No. 10, pp. 45-52 (2002).
- Y. S. Lee, S. C. Seong, J. S. Lee, D. H. Choi, D. H. Kim and H. S. Yeo, "Standardizing Test Methods for Fire Safety(IV)", FILK 2005-10, Fire Insurers Laboratories of Korea (2005).